Payment for goods and downloading of the book in electronic form (PDF format) is made on the website.
To do this, you need to find the book you are interested in and click on the “Buy” button. The price of the book is indicated on the button.
For convenience, the price on the website for residents of Russia, Belarus and Kazakhstan is presented in rubles.
For residents of Ukraine in hryvnias, and for all other countries - dollars.
After clicking on the “BUY” button, a payment window will open where you can select a payment system with which you can pay for the selected book using any bank card (Visa, MasterCard, MIR, etc.)
When you click on the “Pay by bank card” button, the Portmone payment system will open, which is the easiest way to make a payment.
In addition, the website offers four payment systems for payment:
- Yandex (payment from any bank cards, Yandex Money account, QIWI Wallet, terminals, etc.);
- Portmone (payment from any bank cards, Portmone account);
- PayPal (payment from any bank cards, PayPal account);
- WebMoney (payment from any bank cards, payment from WebMoney wallets).
Payment via Yandex Cashier
After selecting payment via Yandex, the Yandex Cashier payment system will launch, where you need to select a convenient payment method (bank card, QIWI, Yandex Money account, etc.)
After specifying payment details and confirming payment, payment for the goods will occur.
If you have a bank card in a currency other than the ruble, then the money will be debited from the card at the rate of the Central Bank of Russia at the time of the purchase.
This payment method is optimal for residents of Russia, Kazakhstan and Belarus.
Official website of the Yandex Kassa payment system https://kassa.yandex.ru
Sound insulation of doors VAZ 2113, 2114, 2115
Sound insulation of car doors VAZ 2114, 2113 and 2115 plays an important role in increasing driving comfort. It allows you to solve the following problems:
- significantly reduce the level of noise entering the interior from the street;
- eliminate knocks and creaks produced by internal parts and parts of the door trim;
- improve the sound quality of music in the cabin, especially if the speakers are built into the doors.
ATTENTION! Now you can buy a completely new Pioneer MVH X580BT processor radio for only 2990 rubles! Don't believe me? Then follow the link and see for yourself! Read more"
Soundproofing the doors of VAZ 2114 , 2113 and 2015 can easily be done with your own hands. The materials used are relatively inexpensive and can be purchased at almost any auto store.
The recommended standard sound insulation of the front doors of VAZ 2114, 2115 and 2113, which, as practice has shown, gives a fairly good result, consists of the following steps:
Disassembling the door. Removal of the casing and subsequent disassembly must be done extremely carefully. It is important to remember (or better yet, write down) the sequence of operations, the correspondence of the unscrewed bolts and screws to their holes. For convenience, you can lay out the parts on a large surface in order of disassembly. The door closing mechanism and the window lift do not need to be removed - they will not interfere with the work, but putting them back is quite difficult.
Cleaning the inside surface of the door. It is necessary to remove the factory sound insulation and other coatings that may peel off (anti-corrosion coating, etc.), but it is important not to scratch the paint. The surface of the metal must be thoroughly cleaned and degreased - for this it is recommended to use White Spirit solvent; the very bottom of the door does not need to be degreased.
Sticker of the first layer of soundproofing material. The inner surface of the panel (the wall of the door facing outwards) is pasted over with vibration-damping material (self-adhesive Vibroplast Gold STP or its equivalent is recommended) - pieces are cut approximately in the shape of the contours to which they will be glued. This work, of course, is not easy - you need to contrive to stick “Shumka” through the openings of the technological holes, which is quite inconvenient, especially in the far corners. To avoid cutting your hands, it is advisable to work with gloves, using available means for pressing the material to the surface - a rolling roller (where it can be reached), flat tools, wooden blocks, etc. Where it is impossible to glue whole pieces, you can glue individual pieces overlapping each other, you need to cover as much surface as possible. When sticking Vibroplast, it is important not to close the drainage and ventilation holes so that condensation does not accumulate inside the door. If a circle cut from Bitoplast is glued behind the speaker on top of Vibroplast, the sound quality will improve, since the speaker will not resonate with the door.
Payment via Portmone
After selecting payment through Portmone, the payment system will launch, where you need to select the payment method: bank card or Portmone account.
The price in the Portmone payment system is converted into dollars at the exchange rate of the Central Bank of the country where you are located.
If you have a bank card in a currency other than the dollar, then the money will be debited from the card at the rate of the Central Bank of your country at the time of the purchase.
After specifying payment details and confirming payment, payment for the goods will occur.
Official website of the Portmone payment system https://www.portmone.com
Replacing the window regulator
To replace the window regulator, you need an extension, a wrench and a 10 mm socket.
Having freed the front door from the trim, remove the 2 bolts securing the glass to the bar. Usually they are tightened tightly, so it is more convenient to use the head as a lever.
Remove three nuts securing the electric motor, one nut under the glass, two in the center and one nut at the bottom of the door.
After removing all the nuts, disconnect the power plug from the electric motor.
The window regulator is removed from the studs and taken out of the cavity into the technological hole in the center of the door. Installing the window regulator occurs in the reverse order.
After removing the structure, the electric motor is first checked. If it is faulty, it is replaced. If the cause of the breakdown is not obvious, replace the window regulator.
Payment via PayPal
After selecting payment via PayPal, the PayPal payment system will launch, where you need to select the payment method: bank card or PayPal account.
If you already have a PayPal account, then you need to log into it and make a payment.
If you do not have a PayPal account and you want to pay using a bank card via PayPal, you need to click on the “Create an Account” button - shown with an arrow in the picture.
PayPal will then prompt you to select your country and provide your credit card information.
After specifying the information required to make the payment, you must click on the “Pay Now” button.
Official website of the PayPal payment system https://www.paypal.com
Glass replacement
It is better to buy glass and a glass holder as a set for replacement.
To replace, you need an extension, a wrench, an 8 and 10 mm socket and an assistant.
The side glass is blocked with a screwdriver to prevent it from falling out. The door trim is removed. A felt-tip pen marks the places where the glass frame is attached to the door on the frame and on the door. The bolts securing the glass frame to the window regulator are turned out.
The window regulator bar must be fully raised. The cable on the roller from the bottom of the glass is dismantled. Then the seals (velvet covers) are carefully removed.
Hold the glass during this time so that it does not fall out. After removing the seals, the glass is lowered down about 10 cm, tilted to the side and removed from the groove.
The new glass is installed in the reverse order. Apply WD-40 or a similar lubricant to the glass frame, insert the glass and leave to dry. After the grease has dried, the glass is installed in the door. New glass is installed in the seals.
If the seals have become unusable, new ones are cut out of rubber, while the old ones are used as patterns.
The glass with seals is inserted into the groove, aligned and lowered into the stopper. The window lifter handle is lowered to its lowest position. The glass is fixed with bolts and the cable is installed in its original place.
The operation of the window regulator is checked and, if necessary, the cable tension and the position of the seals are changed.
Payment via WebMoney
After selecting payment via WebMoney, the payment system will launch, where you need to select the payment method: bank card or WebMoney wallet.
If you already have a WebMoney wallet, then you need to log into it and make a payment.
If you do not have a WebMoney wallet and you want to pay in another way, you need to select any of the methods that WebMoney offers and make the payment
After specifying payment details and confirming payment, payment for the goods will occur.
Official website of the WebMoney payment system https://www.webmoney.ru/
Stage 4. Glass mat
After shaping, it is not rigid enough for us. For this we use glass mat. I use a density of 450 g/m2.
For our convenience, it is better to cut them into small pieces. I always first coated the place where I would lay the glass mat with a thin layer, laid it down and spilled it again.
Be sure to lay it in all places, even hard-to-reach ones, otherwise there will be air voids there.
I do 2 layers with 4 hour intervals for better resin drying.
Once completely dry, we can trim off the remaining lycra around the edges, unscrew the bars and cut out holes for the speakers.
Downloading a book
After successfully completing the payment (by any method) and returning to the KrutilVertel store from the payment system website, you will be taken to the successful payment page:
On this page you need to indicate your e-mail, where access to download the book will be sent.
If you are already registered on our website, then simply follow the link to your personal account.
The book you purchased will be in your personal account, from where you can always download it.
Please note that after making the payment, you need to return back from the payment system website to the KrutilVertel website.
If for some reason you did not return back to the site and closed the payment system tab with a message about the successful completion of the payment, please let us know - we will send you a letter indicating access to download the book.
Removing the rear trim
There is no point in repeating the main points; they are almost identical.
The handle is also disassembled and the plug and the upper locking “latch” are removed. But there are no shelves or speakers here.
There is also no power window, that is, there is no wiring that needs to be disconnected. But here there is a regular window handle, as people call it – “oars” or a “muscle power” drive. In order to disassemble it, you need to bend it slightly towards yourself with a screwdriver - pull out the lower locking ring. After which the handle will simply come off on its own.
We repeat the same procedure with the upholstery as on the front door, just gently pull. Remember about rivets.
Now a short video.
What else I would like to note is that if you read the instructions, it recommends completely changing the rivets every time you remove the upholstery - they simply lose their characteristics, the antennae fall off, if my memory serves me correctly, there are 8 of them on each upholstery. This threatens to cause rattling on bumps and uneven roads.
Problems when paying with bank cards
Sometimes difficulties may arise when paying with Visa/MasterCard bank cards. The most common of them:
- There is a restriction on the card for paying for online purchases
- A plastic card is not intended for making payments online.
- The plastic card is not activated for making payments online.
- There are not enough funds on the plastic card.
In order to solve these problems, you need to call or write to the technical support of the bank where you are served. Bank specialists will help you resolve them and make payments.
That's basically it. The entire process of paying for a book in PDF format on car repair on our website takes 1-2 minutes.
If you still have any questions, you can ask them using the feedback form, or write us an email at [email protected]
Materials for upholstery
On a VAZ 2114 euro, the door trim is made from various materials. Choose fabric based on price, quality and ease of use. For example, a knitted piece is easier to secure than a silk piece, but velvet looks more impressive. Eco-leather and Alcantra are durable, while leatherette and carpet provide a combination of price and quality. Velvet flocking is also popular.
Main types of fabric, their advantages and disadvantages:
- Leather – luxury upholstery. It is resistant to moisture and temperature changes. Traces of chemical contaminants are easily removed from leather.
- Eco-leather and leatherette are durable and wear-resistant materials. The technical characteristics of this fabric are similar to natural leather, but the price is lower. There is only one drawback - the fabric requires special care. Microcracks will appear on the canvas if you use abrasives or heat the leatherette during cleaning.
- Alcantra is a modern material that consists of ultra-fine fibers. This coating will not deteriorate from moisture, will not stretch, or shrink even after a long period of use.
- Carpet is made from artificial fibers and is considered a traditional automotive fabric. It repels dust, is resistant to fungal compounds, does not fade, and does not stretch. Convenient for re-tying. Provides heat and sound insulation.
- Velvet - gives the interior a noble look, is wear-resistant and durable. This upholstery will last for many years.
- Vinyl or leatherette is the most durable and durable option; it will make the skin durable. These types of fabrics withstand climatic changes and do not deteriorate due to treatment with detergents. However, when used for covering leatherette, you will need to install an additional layer of insulation.
About the tool
What we need are screwdrivers, preferably one Phillips and the other straight. Also buy “pistons” for trim, they are universal and suitable for the entire VAZ family. Many people also call them “Christmas trees.”
They cost pennies, but they break when disassembled. Therefore, it is advisable to have them, otherwise the door will rattle. We won't need anything more.
I suggest starting from the front.
