Why won't the hood open?

The hood of a car may not open for several reasons. For example, his lock may become damaged. In addition, due to mechanical damage, for example during an accident, the hood and engine compartment are deformed. This may also make it impossible to open.

If we talk about the most common reason for this phenomenon, it is a banal break in the metal cable that drives the hood locking mechanism. A cable can break for various reasons, the main ones being: wear, corrosion on the surface of the cable, or excessive force applied to it. In the case when the cable is broken, the owner of a VAZ car can open the hood on his own, as this is a relatively easy procedure. In all other cases, it is quite possible that you will have to involve professionals in the repair work.

How to open the hood of a VAZ-2109 with a broken cable

The VAZ-2109 car is full of surprises, so those who like to upgrade their favorite iron horse with their own hands in the garage will love the car. There are a lot of problems during the active operation of the VAZ-2109, but there are also a huge number of tuning options. One of the breakdowns may be a rupture of the cable that opens the car hood. Until you fix this problem, the hood will remain idle in the closed position. The cable breaks more often in cold weather, unable to withstand low temperatures. Another reason for damage to its integrity is wear of the part.

Ways to open the hood

In different situations, different methods are used to cope with the described malfunction. Among the most common cases are the following:

• cable breakage directly next to the remote lock opening drive lever. In that case, it will be enough to grab its end sticking out in the cabin using ordinary pliers and pull it hard. In this case, it is necessary to pull on the cable itself, and not on its braid.
• a cable breaks in the cabin when it is impossible to grab it with pliers. In this case, you will need bent wire. With its help, you can open the hood, for example, in order to change the oil, even when pliers do not help. To do this, you will need to bend a hook out of wire, insert it into the gap in the air duct or between the body and the hood, hook it onto the damaged cable and pull it until the hood lock opens.
• The cable breaks far from the lock drive lever. In this case, you can try to perform the operation through the air duct. Here you will also need a hook bent from hard wire. It is inserted into the left air duct and a cable is hooked with it.
• cable breakage directly in the area where the lock mechanism is installed. Typically, such a lock is installed in front of the hood, and therefore it is useless to pull on it. As a result, the engine compartment lock can only be opened from below, by driving the car into a pit. To do this, you need to pay attention to the crankcase protection by removing it. For this purpose, unscrew its fastenings and pull down the engine boot. Next, insert a long screwdriver into the hole next to the radiator and try to open the lock with it. If it is mounted next to the windshield, try using a loop bent from wire to hook the lock mechanism at the place where the cable is attached and pull it.

VAZ 2107 models

In the case when the engine compartment does not open on a VAZ 2021 car, this circumstance should not be a reason for panic. The fact is that the hood itself, the air intake cover and the place where the cable exits into the cabin are placed in an accessible manner. This circumstance allows you to open the hood of the VAZ 2107 yourself using one of the methods described above.

Difficulties can only arise if, for example, the air intakes here are equipped with decorative trims. In this case, you will have to first remove them and then try to open the hood. It is worth noting that due to the design features of the hinges, the hood of the VAZ 2107, even in good condition, opens poorly and therefore it is worth first making physical efforts, and then starting to open it.

VAZ 2109 models

It will be more difficult to open the hood of the VAZ 21099, since to do this you will have to crawl under the car. In addition, you will need to remove the crankcase protection, as well as the tin boot of the engine. This is done so that you can stick your hand to the radiator. After this, we feel for the torn cable and the ring to which it is attached. We press the lock and ask the assistant, who is on top, to press the hood from above, as well as in the direction of the driver’s seat. You can also hook the lock with a wire hook, but not everyone can do this.

VAZ 2110 models

In order to open the hood of a VAZ 2110 when the cable breaks, it is enough to use one of the methods already described for opening it. At the same time, there are some subtleties of opening it with your own hands. For example, some configurations of this model provide for the installation of an electric lock on the hood.

As a result, the car's battery may simply run out and the hood cannot be opened. To cope with this situation, it will be necessary to disassemble the light located above the passenger or driver’s seat, and also connect the “plus” and “minus” terminals from the battery of another car to its terminals. Next, you will need to start the car, and if there are no other faults, the lock will open.

Experienced car owners, in order to prevent such situations from occurring, perform hidden wiring to the battery. In this case, it will be enough to simply connect a charger to it and charge the dead VAZ 2110 battery.

VAZ 2114 models

Opening the hood of a VAZ 2114 is carried out in the same way as a similar operation on a VAZ 2109. Moreover, taking into account that the VAZ 2115 is equipped with equipment in the engine compartment similar to the equipment of the “fourteenth” model, having studied this procedure once, it will be possible, in that case, when the cable breaks, open the hood independently on three models of cars produced by VAZ.

If we talk about the peculiarities of performing this operation on this particular model, then professionals advise opening the engine compartment of the Lada as carefully as possible, so trying to insert a hook through it in order to pick up a broken cable or reach the hood opening lever can easily break it. As a result, you will have to buy two structural elements of the car at once to replace it, costing quite a lot of money. In addition, the opened hood will need to be carefully inspected and all its moving parts will need to be lubricated. These are the hinges and the lock mechanism. Such simple actions can prevent an emergency from occurring in the future.

How to Open the Hood on a VAZ 21099

Car repair and service

DIY car repair and maintenance

Recently, I encountered a problem that the hood would not open, but how to open the hood of a Ford Focus 2 if, as it turned out, the lock cylinder was broken. I unscrewed the under-engine protection and opened the hood.

Then, a friend of mine arrived in a VAZ 2108 with the same problem, and there were many such Lada owners with the same problem. Opening the hood of the VAZ 2109 is easier than on the 14th and 15th models, because they do not have plastic protection under the bumper.

Using example 2114, I’ll show you how to open the hood of a car if the cable breaks.

And so, the situation: the cable is broken, how to open the hood?

To do this, first of all you need to remove the protection. If your car is equipped with a massive crash guard, then the front two lugs (or mounts) will be tightened with two front crab bolts. (photo below).

How to remove and unscrew the engine protection on Lada 2114, 2115 models

If a standard protection is installed on the machine, then it needs to be removed by unscrewing several screws with an 8 key. As shown in the image below, there are four screws from the front of the TV, two self-tapping screws in the middle of the protection itself (it consists of two parts), and so There are also several self-tapping screws securing the protection to the side members.

How to open the hood of VAZ 2108,2109,21099,2113,2114

How to open the hood of a VAZ

2108 2109
21099
2113 2114 21015 It is not necessary to cut the hood with a grinder or turn it inside out.

How to remove and unscrew the protection on a VAZ, Lada with your own hands

After that, you need to reach with your hand to the top panel of the TV and pull the cable fastening eye to the left (where, in fact, the cable pulls). N

How to open the hood if the cable breaks

How to open the hood of Lada 2114, 2115 yourself

In the photo below, the red arrow indicates where to pull the lever. No effort is required for the lock to unlock. If you pull the cable and the hood still does not open, then you need to simultaneously pull the tab to the left and prop the hood up with your fist. You can do it with one hand. It's even easier if one person handles the lock while the other pulls the hood up.

Replacing the hood cable on a VAZ, Lada 2109

If you are going to change the cable, then after you remove the old one and take the new one out of the car, you will first need to pull the cable to the front eye and insert it into place.

Replacing the hood lock cable on a VAZ 2114, Lada 2115

After this, install the neck of the cable into the second eye, pulling it in the opposite direction (see photo below).

DIY hood cable replacement

Replacing the hood lock cable with your own hands on a VAZ, Lada 2108

Source: https://avto-melvin.ru/kak-otkryt-kapot-na-vaz-21099/

Installing the cable

If the cable breaks, it will have to be replaced after opening the hood. For this:

1. in an auto parts store they select a new spare part, and from the available products it is worth choosing multi-strand cables as the most durable.
2. a hook is made from wire. The hook must be inserted into the hole under the hood release handle. They will need to hook a strong cord and pull it inside the cabin.
3. A new cable is tied to the cord and pulled into the cabin.
4. Next, the new spare part is connected to the hood opening handle and the mechanism for opening its lock.
5. The entire system assembly is checked for functionality.

How to Open the Hood of a VAZ 2109 Without a Cable

as open VAZ-2109 hood with a torn cable

VAZ car2109

Full of surprises, so for those who like to do their own upgrades in the garage of their favorite car, the car will have to be in the mood. There are many problems with active use of the VAZ-2109, but there are also many customization options.

One of the breakdowns is a break in the cable that opens the hood of the car. The hood will remain closed until you correct the problem. The cable often breaks in cold weather, unable to withstand cold weather. Another cause of damage to integrity is wear of the part.

What to do if a cable breaks in the cabin

The cable, which allows you to open and close an important part of the VAZ-2109, is a stranded or single-core steel wire enclosed in a sheath over a metal braid. The main task of the cable is to open the lid when force is applied to the handle of the locking device.

to open

design of broken
rope
inside vase
2109
, it is necessary to inspect and evaluate the area where the break occurred. Despite the division, access to some parts and areas was certainly preserved and should be explored. Examining the condition of parts near the hood begins with inspecting the lock handle.

Mechanism for changing the position of the VAZ- 2109 . A lock and hook design are provided, the latter acts as a safety device against unauthorized opening of the hood. The details are located at the front. The manufacturer took the handle in the cabin and built it on the left side directly under the dashboard. When you see a rock, get to work.

How to open the hood of a VAZ 2109 without a cable.

Experts note several ways to open the hood using a cut cable. Rushing inside the cabin allows you to solve the problem with pliers.

Use a tool to remove any remaining torn piece with the tool, try to grab the edges of the strip, unfortunately don't touch the braid.

Make an effort to pull the edges of the bar for you personally, unfortunately, while maintaining a smooth ride, do not allow sudden jerks. Otherwise, there is a high risk of the cable breaking elsewhere. If you want to make sure the cable doesn't fall out of the pliers, make a loop near the base of the workpiece and pass it through the tool.

AS AN OPEN DRAIN VAZ (if the cable is broken or broken)

With such a mildly confused event, we save ourselves the trouble that confused you.

If a cable explodes under the hood of a VAZ-2109

There are times when the cable breaks in place right under the cover. Then follow these step-by-step instructions:

1. Requires an elevator, trestle or inspection hole. If you have a jack, use it after first insuring the car against falling from a height.
2. With the car on top, take the crankcase guard, which is secured with several fasteners. Perform the same manipulations with the tin lid, this will help clear the space for further actions to open the hood.
3. Place your palm in the hole between the radiator and the engine compartment. Use your fingers to touch the ring that secures the stop. The component is located next to the lock.
4. When you reach the ring, pull it towards you and push it to the left, considering the door next to the driver. The hood should open.
5. If the manipulation does not give a positive result and the hood is still closed, try putting on the ring and squeezing it well. To make the process go faster, it is advisable to seek help from another person’s textbook.
6. All that remains is to remove the broken cable and replace it with a new one. An assistant must pull out the spring mechanism near the lock, and then the car owner secures the cable to the handle of the locking mechanism.

Alternative ways to open the hood of a VAZ-2109

Experts share additional ways to solve the problem of detecting the VAZ-2109 hood

rock based
rope :

How to open a video without a VAZ 2109 key.

1. Lift the lid of the machine and open the keyhole with a long wire.
2. If they did not manage to open the hood with their own hands, they should contact a car service center, whose employees will do this work efficiently and quickly, and in addition, replace the broken cable.

The self-opening hood can be helped by the instructions that came with your vehicle. In it, the manufacturer describes frequently occurring breakdowns and how to fix them yourself. Either way, you'll need to study the pull pattern.

To ensure that the VAZ-2109 cable lasts a long time, use the following expert recommendations:

1. Grow crops using a fly trap.
2. Use a multi-core cable. It is considered the most durable, reliable and, at the same time, mobile; it is not too stretched and is characterized by slow wear.
3. Be careful with the locking mechanism handle.

Newbies in the domestic car repair business are experimenting in vain, replacing a broken cable with a regular wire. hood cable in a VAZ-2109

, tell us in the video lesson:

conclusions

The design of VAZ cars has some outdated elements that have not been used on modern car models for a long time. These include the hood release cable. If it breaks, its cover will jam and the car owner will have to open the engine compartment. This procedure is relatively simple and can be done independently, although you will have to spend quite a lot of time. In order to prevent such an unpleasant situation from occurring, it is necessary to modernly replace the cable, and also try not to apply significant physical effort to it.

How to open the hood of a nine

How to open the hood of a VAZ 2109 (nine) with your own hands. To carry out construction work, I borrowed a Lada 2109 car, manufactured in 1987. Interesting car, it ran, brakes and engine worked, but everything else was broken or missing. If you drove it every day, it would start. During breaks of more than 3 days, I put in a new battery and started up with problems. The car continued to deteriorate in my careful hands... the muffler broke through, the driver's door stopper broke, and so on. Let's move on to the main thing - the hood. First, the cable securing the hood opening rod to the interior handle broke. This issue was resolved by using pliers to open the hood.

The hood had to be opened every time when starting - turning on the mass, shamanism with the carburetor flaps and for adding fluids. When opening with pliers using a broken cable, the hood did not always open, so more effort was required to open it. And before leaving for the weekend, I began to prepare the car for long-term parking, and of course, according to the “law of meanness,” I broke the cable inside the hood. Honestly, until this moment ABSOLUTELY not paid attention to the design of the hood lock. And now time is running out and I understand that if I don’t turn off the power to the car, then in three days I will have to run with the battery again, but first I will also need to get into the hood. Time passes, as always, for the answer - on the INTERNET. There are plenty of recommendations: - go to the ski lift, and it’s easy there; — crawl up from below and easily; — lift the hood on one side and open it with a stick, pushing the spring; - make a hook from steel wire and open it by pulling the spring. The most annoying thing is that there is not a single photograph of the castle, what to pull, where to put it. (I threw away the instruction manual, this VAZ “Kama Sutra” when cleaning the trunk because of its very shabby and oily appearance). But I can’t start the car without opening the hood, the nearest service station is 15 km away, there is no jack and there is no one to ask and see how the lock works. I started to lift the hood on the left. I used a flashlight to illuminate the insides of the hood. I saw a broken cable. As recommended, I stuck a stick (a tube from a ski pole) into the gap in the hood and pushed the spring - it WILL NOT OPEN. The number of pages viewed is already more than 30. On some, it is recommended to press the hood in the area of ​​the lock at the moment of opening. We tried it - NO WAY. Time passes, I decided to lift the hood on the left and do some magic with throwing a hook or loop onto the spring eye. All available materials were used. Progress came with the use of double copper wire in insulation. The formed loop and 20 minutes of attempts allowed me to throw the loop. To make work easier, a wooden sliver spacer was inserted under the hood; after putting the loop on, the sliver must be removed. It was not possible to open the hood simply by pulling the spring towards itself; apparently, the mechanism was warped, but following the recommendations, after pressing the hood in the area of ​​the lock (it is not necessary to press hard) and pulling the improvised cable, I was able to hear the treasured click. The hood was opened and measures were taken to “preserve” the car. The end of the cable is secured in the eye of the spring, by compressing the eye, being careful not to break it, and also a strip of rubbish that came to hand is additionally secured to the cable. I hope the photos shown will help in opening the hood of this miracle car. Look at the comments on the blog, there is a lot of interesting stuff there, leave your comments.

How to Open the Hood of a VAZ 21099

If the cable is sleeping: how can you open the hood of a VAZ 21099

If the VAZ 21099 cable is broken, you need to find out how the hood opens. This procedure is performed using a screwdriver and pliers.

Step by step guide

Nineteen car enthusiasts are wondering how to open the hood when the cable is worn out or there is no lubrication on the mobile device. The tasks of the first element include opening and closing the hood of the car. If the cable breaks, it is necessary to determine the location of its break. This is usually where the car owner pulls the lever. This happens less often under the hood of the VAZ 21099 .

In the first case, you will need to wrap your hand around the lever, making sure that the cable does not fit into this device. It is recommended to inspect the area around the handle. Once the location is determined, use pliers to pry up the edges of the cable. Then she is dragged into the salon. Auto mechanics advise hooking the end of the rope. If the above procedure is performed correctly, the hood of the VAZ will quickly open.

In the second case, the cable on the disk is broken. In this situation, it is planned to replace the rope in question with a home one. Motorists who do not understand 21099 are advised to seek professional help. Otherwise the extract may open forward or backward.

To open the hood forward, you will need to remove the grille. This is necessary to access the lock. It is advisable to first inspect the grille and find out whether it can be removed with your own hands or not.

If the cable has fallen off: how can you open the hood of a VAZ 21099:

If the cable on a VAZ 21099 breaks, you need to find out how the hood opens. This procedure is carried out using a screwdriver and pliers.

• Step-by-step instruction
• Car rope replacement

Return

Step-by-step instruction

Car owners of nines are interested in how to open the hood when the cable is worn out or there is a lack of lubricant in the moving device. The tasks of the first element include ensuring the opening and closing of the car hood. If the cable breaks, you need to identify the location of its break. Usually it is located where the car owner pulls the lever. Less often this happens under the hood of the VAZ 21099.

In the first case, you will need to move your hand around the lever, making sure that the cable does not fit into this device. It is recommended to examine the area around the handle. If the place is determined, then using pliers you need to hook the edge of the cable. Then he is pulled towards the salon. Auto mechanics advise making a hook at the end of the rope. If the above procedure is performed correctly, then the hood of the VAZ will open quickly.

In the second case, the cable breaks on the drive. In this situation, it is possible to replace the rope in question with a homemade one. Car enthusiasts who do not understand device 21099 are advised to seek professional help. Otherwise, the hood can be opened forward or backward.

To open the hood forward, you will need to remove the grille. This is necessary to obtain access to the corresponding castle. It is recommended to first inspect the grille and find out whether it is possible to remove it with your own hands or not.

Opening the hood backwards is considered a more complicated procedure. This problem can be solved in 2 ways.

1. Gain access to the lock through the air intake holes located in front of the windshield. However, not every VAZ 21099 car provides such access.
2. The second method involves dismantling the grille by unscrewing the corresponding fasteners. Then the hood is opened and the cable is replaced.

Return

Car rope replacement

Replacing the cable

To change the hood cable, you will need to follow certain steps. Initially, the old product is dismantled. To do this, you will need to remove the handle or look under the instrument panel. If the rest of the rope is visible, then it can be compressed using pliers, pulling it towards you.

Once you have determined how to open the hood, you can access the cable. If the element in question has broken under the hood or has fallen asleep, then you will need an inspection hole. This process involves removing the engine protection. First of all, you will need to wait some time for the VAZ 21099 engine to cool down.

Then, if you run your hand between the block and the radiator, you can feel the lock spring. It needs to be pulled back. Often, this requires pressing the battery to the side. The final stage is based on closing the hood. Next, the old cable is pulled out from the special spring mount. Using a screwdriver, remove the fastening near the lever.

Such actions should be performed carefully, as access is difficult. The fastenings provided in the body of the VAZ 21099 are released. They are often presented in the form of standard rubber plugs. Then the cable is dismantled. Installation of the new rope begins in the motor compartment.

This element must be secured to a spring. The rope is inserted into the fastening. A rubber plug is used to secure it. Before it is launched into the cabin, a special plastic cap is put on it. It plays the role of a limiter.

THIS IS INTERESTING: How to open the trunk of a VAZ 2106

The cable is fed into the interior of the VAZ21099 through a special hole. The rope is fixed on a lever. If the loop is tightened on the handle, then the spring is pulled back along with the cable.

A similar procedure is carried out with the participation of an assistant. With outside help, the cable will be well tensioned. The main thing is not to overdo it. Otherwise it will burst. In order for the hood cable to serve for a long time, you will need to lubricate its outputs with Litol.

When choosing this part, it is recommended to give preference to multi-strand rope. It is considered more durable than its single-core counterpart. At the same time, such a product is more flexible, unable to stretch and practically does not wear out. You need to work with the handle mounted on the hood of the VAZ 21099 carefully.

Source: https://expertVAZ.ru/21099/otkryit-kapot-esli-spal-trosik.html