QUESTION. ANSWER. | Topic author: Carlota
Since your questions get lost on the wall due to the many photos and other reasons, write them in this thread so it’s easier.
Oleg (Robinsen) If possible, something about installing an engine from a VAZ2112-11-10.
Oleg (Robinsen) And what else is needed for this, (what kind of checkpoint)
Upgrade (Eunys) We'll look into the issue soon Oleg!
Oleg (Robinsen) Thank you very much!
Oralbek (Deron) Hello friends. Why does vibration appear in the car at a speed of 50 km/h? Could the driveshaft suspension be the cause? I installed new crosspieces and soft connection.
Ruslan (Thibaud) Oralbek, can be suspended. or balancing the cardan.
Oleg (Robinsen) Check the mountings under the engine!
Alexander (Arhat) Oralbek, When I took the cardan apart, I had to notice how it stood next to the old crosspieces and I had to reassemble it the same way!
Kostya (Bold) Has anyone installed rear shock absorbers like on a Fiat 124
Artur (Hadiyya) hello everyone. How can I get angel eyes, because I can’t find a wand from the blinds
Andrey (Orestes) After the night, the windows of the car are warming up and there are no windows yet, what should I do to defrost it faster?
Ruslan (Thibaud) Andrey, potbelly stove in the salon))))))))))))))
Ivan (Zoelie) guys, has anyone tried to fit the front windows from the 7 onto the 6?
Konstantin (Dipita) Ivan, side? or frontal, if frontal then they are the same) if side then nothing complicated
Roman (Ivriya) dear friends, which speedometer is suitable for a VAZ 2106 from which car can you recommend?
Ivan (Zoelie) needs a normal pair of simple rims for the shawl, why do they fit on the heels? p13
Igor (Wendi) please tell me where is the engine number for a 1974 VAZ 2103?
Seryoga (Jodie) Igor, on my engine on the top right
Igor (Wendi) Gray-Grey, thank you, but now it’s no longer necessary!
Where is the identification number located?
Information about VIN codes and a special table must be placed on all vehicles. If you are the owner of a VAZ-2110 car, it is important to know where such information is indicated. The VIN number allows you to display important information about the vehicle, including its technical characteristics.
In this case, the car model 2110 has a VIN code located in the following places on the body:
- from the bottom of the trunk (in order to see the information, you will need to remove the spare wheel);
- on the telescopic stand, on its right side.
In addition, you can see a plate with the main characteristics and year of manufacture of the car. It is worth considering that the VAZ-2110 has an embossed engine code on its cylinders, in the place where the transmission is located, directly above the flywheel. Therefore, regardless of the technical features of the model, the engine number will be in the same place.
The process of registering a vehicle is possible only if you have information about the VIN code, because this data is assigned to each car and is unique. It is also indicated in the technical passport.
It is important to keep the engine number in a legible state. To do this, you should periodically clean the sign from dirt and rust using special products, a metal brush and any clean rag.
To get a good look at where the VIN code is located and what its data is, you should remove the air filter, because the numbers and letters are hidden under the engine thermostat.
Reviews, oil change and resource of ICE 2105
According to reviews from the owners, the power unit has indeed become less noisy, but all its other problems have not gone away. Reliability is still low, lubricant leaks and overheating often occur. The only advantages are the low cost of spare parts, as well as the prevalence of service.
Oil service is carried out at least once every 10,000 km and on a warm engine. To replace, you will need approximately 3.5 liters of 5W-40 or 15W-40 mineral water, as well as a new filter. See the video for all the details of the procedure.
According to factory data, the engine life is 125 thousand kilometers, but in reality it is significantly higher, approximately 200,000 km and even more.
Join the discussion
You can post now and register later. If you have an account, log in to write on your behalf.
Reply to topic...
× Pasted as formatted text. Paste as plain text
A maximum of 75 emoji are allowed.
× Your link has been automatically embedded. Display as link
× Your previous content has been restored. Clear editor
× You cannot paste images directly. Upload or paste images from the link.
Loading…
×
- Computer
- Tablet
- Telephone
Chevrolet
On some Chevrolet vehicles, the manufacturer places the engine code next to the dipstick for measuring the oil level in the crankcase. Often the area near the oil dipstick is very dirty. Therefore, it may be difficult to check the code.
There are two ways to clean engine oil that has become ingrained during operation:
- On one's own. To do this, you need to make a solution of soap and hot water. Apply the resulting solution to a rag or sponge and wash off the dirt;
- With the help of professional car wash services. The car wash staff has chemicals and special equipment that can be used to clean contaminants in inaccessible places.
IMPORTANT: When trying to clear the code from stubborn oil yourself, you must prevent water from getting on the electronic sensors and ignition elements. Moisture ingress can lead to a short circuit and failure of the part.
Detailed diagram of the machine
The bumper elements are made of plastic, attached with brackets, and have chrome trim.
There is a lot of space inside the car. The front seats have adjustable backrest and longitudinal position. The rear seat is three-seater.
What remains for our client to do is that the glass is of a non-hazardous type, and the intelligent structure of the car will ensure a reduction in impact in an accident.
What is a lambda probe?
The Greek letter "lambda" in physics represents the oxygen content. Therefore, the oxygen sensor
on injection engines is also called a lambda probe. These sensors began to be used on VAZ classics recently, when the VAZ 2107 model with an injection engine appeared on the assembly line.
In the engine injection system, the VAZ 2107 oxygen sensor (injector ) monitors the oxygen content in the exhaust gas mixture. This was done to reduce the content of harmful carbon monoxide in the vehicle exhaust and ensure the optimal composition of the mixture supplied to the cylinders.
The sensor compares the oxygen content in the atmosphere and car exhaust. When the oxygen content is lower, the sensor produces a higher voltage and vice versa. The engine ECU operating algorithm is based on sensor readings and automatically changes the composition of the mixture entering the cylinders.
Read:
How to set the ignition on a 4a Fe engine... How to set the ignition on a 4a fe engine Electrical control unit for the engine of Toyota 4A-FE, 5A-FE, 4A-GE, 7A-FE cars Toyota Corolla, Crown, Toyota Carina E, Carib, Toyota Celica , Sprinter, Kaldina is programmed in such a way as to provide the best ignition timing at different engine operating modes. Using information...
How Often to Change the Oil in a Kalina Engine... Change the oil? It's as simple as that. Especially if you have. Kalina. Regular oil changes in the Lada Kalina engine (however, this applies to any car) are necessary for the normal operation of the unit and extending its service life. How often this procedure is carried out depends on many factors: mileage, daily driving conditions, and quality...
The VAZ 2107 injection engine control system is equipped with two types of Bosch lambda probes. The first one, without a heater, was installed until 2004, after which the plant switched to sensors with heaters.
Technical information
dimensions
Engine compartment layout
- Brake system reservoir.
- Clutch hydraulic reservoir.
- Cooling system expansion tank.
- Washer reservoir.
- Ignition coil.
- Radiator plug.
- Distributor.
- Vacuum brake booster.
- Oil filler cap.
- Cylinder head cover.
- Radiator assembly with electric fan.
- Air filter.
- Accumulator battery.
- Gas reducer (not for all cars).
Identification information
The vehicle identification plate is located under the hood in the engine compartment on the front passenger side.
- Vehicle identification number.
- Engine model.
- Year of issue.
- Parts number.
- Car version.
The vehicle identification number is a combination of seventeen alphanumeric characters (for example: XTA210610G1387959), which are deciphered as follows:
- The first three letters (XTA) are the manufacturer's index. The first symbol is the geographical area; the second is the country; the third is the manufacturing plant.
- The next six digits (210610) are the car model.
- A letter of the Latin alphabet or a number (G) is the code of the model year of the car.
Code | Date of issue |
A | 01.07.1979-30.06.1980 |
IN | 01.07.1980-30.06.1981 |
WITH | 01.07.1981-30.06.1982 |
D | 01.07.1982-30.06.1983 |
E | 01.07.1983-30.06.1984 |
F | 01.07.1984-30.06.1985 |
G | 01.07.1985-30.06.1986 |
N | 01.07.1986-30.06.1987 |
J | 01.07.1987-30.06.1988 |
TO | 01.07.1988-30.06.1989 |
L | 01.07.1989-30.06.1990 |
M | 01.07.1990-30.06.1991 |
N | 01.07.1991-30.06.1992 |
R | 01.07.1992-30.06.1993 |
R | 01.07.1993-30.06.1994 |
S | 01.07.1994-30.06.1995 |
T | 01.07.1995-30.06.1996 |
V | 01.07.1996-30.06.1997 |
W | 01.07.1997-30.06.1998 |
X | 01.07.1998-30.06.1999 |
V | 01.07.1999-30.06.2000 |
1 | 01.07.2000-30.06.2001 |
2 | 01.07.2001-30.06.2002 |
3 | 01.07.2002-30.06.2003 |
4 | 01.07.2003-30.06.2004 |
5 | 01.07.2004-30.06.2005 |
- The last seven digits (1387959) are the body number.
The body identification number is stamped on the bottom shelf of the air intake box.
Note
The body identification number is duplicated on the left rear wheel arch connector in the left front corner of the trunk.
The engine number is stamped on the left side of the cylinder block.
Note
To make it easier to read, it is recommended to use a mirror.
Payment for goods and downloading of the book in electronic form (PDF format) is made on the website.
To do this, you need to find the book you are interested in and click on the “Buy” button. The price of the book is indicated on the button.
For convenience, the price on the website for residents of Russia, Belarus and Kazakhstan is presented in rubles.
For residents of Ukraine in hryvnias, and for all other countries - dollars.
After clicking on the “BUY” button, a payment window will open where you can select a payment system with which you can pay for the selected book using any bank card (Visa, MasterCard, MIR, etc.)
When you click on the “Pay by bank card” button, the Portmone payment system will open, which is the easiest way to make a payment.
In addition, the website offers four payment systems for payment:
- Yandex (payment from any bank cards, Yandex Money account, QIWI Wallet, terminals, etc.);
- Portmone (payment from any bank cards, Portmone account);
- PayPal (payment from any bank cards, PayPal account);
- WebMoney (payment from any bank cards, payment from WebMoney wallets).