We choose windshield wiper blades and what size are the wipers on the Lada Kalina?

Windshield wipers are important elements in any car. They, by clearing the windshield of dirt, enable the driver to view the roadway in bad weather. If these elements are faulty in bad weather, then driving such a car will pose a danger not only to the person in the car, but also to all other road users.

In the video, replacing wiper blades with frameless ones.

Quick comparison

I offer brief recommendations for wipers. Choose what is more important to you and buy. A detailed description, installation video and price comparison are below.

ModelPeculiaritiesRatingLink
Bosch AerotwinFrameless. Made in Belgium. The optimum ratio of price and quality. ★★★★★Buy a kit
Denso HybridHybrid. All-season. The best brushes on the market. ★★★★★Driver Passenger
Bosch Twin SpoilerHigh-quality and reliable frame wipers with spoiler.★★★★✩Buy a kit
Bosch EcoThe most budget option. But it's still Bosch. ★★★✩✩Driver Passenger

What size to choose for Lada Granta, Kalina 2 wipers


To ensure high-quality cleaning of the windshield, it is recommended to replace the wipers with new ones every season, however, in practice, drivers do this much less often.
But sooner or later everyone is faced with one question: “what is the permissible size of brushes on the Lada Granta/Lada Kalina 2.” Why did we combine these two cars? The fact is that the second generation Lada Kalina 2 is produced only in hatchback and station wagon body styles, and the Lada Granta is considered a sedan in this line. That is why Lada Kalina 2 and Lada Granta have a lot in common, including the same windshield wiper blades (1118-5205072 and 1118-5205070), windshields (2190-5206012), etc.

The operating manual indicates the standard size of windshield wiper blades for Lada Granta and Kalina 2 :

  • driver's (left) - 60 cm.
  • passenger - 41 cm.

We decided to find out what is the maximum possible length of the wipers of the Lada Granta/Kalina 2 . Turns out:

  • If you install a 61 cm long brush instead of the standard one, it will touch the body, creating a knock. Maximum - 60 cm.
  • But the passenger side allows you to install a larger brush, the maximum possible length is 45 cm.

Thus, the maximum size of the wiper blades of these two cars is 600x450 mm. With this length, both blades on top of the windshield will be at the same level. Unlike the standard one, the longer passenger brush will completely clean the glass in the upper part, without touching the body.

Let us remind you that these Lada cars have common not only windshield wipers, but also “diseases”, for example, both cars have a squeaking clutch pedal.

Frameless windshield wipers for Kalina

An excellent option is the Bosch Aerotwin Retrofit AR 601 S kit (article number 3397118907). This is a pair of brushes of the “native” size and fastening. Cleans well in any weather, quiet, durable. They are produced in Belgium. Find out more about Bosch Aerotwin.

Champion piece brushes 600 mm (item ER60/B01) and 400 mm (item ER40/B01). They are easy to install and clean glass well. Read more about Champion Izivision.

SWF piece brushes : 600 mm (article 119860) and 400 mm (article 119840). Asymmetrical spoiler, excellent cleaning, easy to install. Read more about SVF windshield wipers.

Also pay attention to the Kamoka (article 27E09) - frameless Polish wipers. Read more about Kamoke.

Model sizes

This criterion is considered one of the most important, since the final choice depends on it. The size of a vehicle's windshield wipers affects the maximum area of ​​glass that can be wiped. The rear device installed on a hatchback body usually has different parameters compared to the windshield.

At the front, the size of the brushes is considered optimal, more compact. The manufacturer produces a twenty-four-inch front wiper as standard. Most consumers like this size, since the device is able to effectively remove all dirt from the glass quickly, without streaks, with maximum coverage of the contact surface.

When purchasing a purifier, it is better to seek help from a manager. He will give detailed advice and explain all the details. Companies often indicate incorrect data on the packaging that does not correspond to the technical specifications. Companies often round up digital values, which can become a problem during selection and further operation and installation. The seller will show you and tell you which mechanism you should buy.

Additional selection criteria

For a curved version of glass, a frame type of product is suitable. It is more budget-friendly and of lower quality, but it can be used to clean the surface well. Another type of brushes will not cope with this task; it will pollute the windshield area.

If there is no specific curvature, then a frameless mechanism would be the best option. It will fulfill its purpose well. The product, which does not have a frame, adheres very tightly to the surface. Over time, this friction will cause scratches. This will not happen immediately, but gradually over the course of many years of operation of the janitors. Before purchasing, you can experiment and check how tightly it fits. The best option: the product fits tightly, but there is no friction that can leave scratches on the glass.

When asking the price for an accessory, you should take into account all the above-described selection parameters. They will help you avoid making mistakes and buy a quality device. An important criterion is the size of Lada wipers, their model and production quality. A mechanism manufactured in accordance with all standards will serve the owner for a long time and efficiently.

It's no secret that standard wipers on VAZ cars come from the factory of poor quality. They creak and do not clean well, which is not safe for the driver and his passengers.

The following sizes of wipers are used on viburnums:

  • Front left (driver's) wiper – 60 cm.
  • Front right (passenger) wiper – 40 cm.
  • Rear wiper (used on hatchback and station wagon versions) – 36 cm.

Each Viburnum owner must decide for himself regarding the model and brand of wipers, depending on his beliefs and cash. I bought BOSH frameless wipers, and then changed the rubber band on them once a year.

How to install brushes on Kalina

Watch the video on how to install Bosch wipers correctly:

what kind of
wipers are installed
on viburnum How to change wipers

on viburnum. When you put them back, you will need this information.
If you put them in the wrong position, they can hit the bottom of the pad during operation, scratching it and damaging the brushes. Well, there’s another problem that occurs on Kalina, the brush on the driver’s side hits the edge of the driver’s door. Someone also sets it to 40cm, but in this case it will be necessary to increase the limit of the wiper stroke. Buy frame fin whales for 250 rubles (there are just 2 brushes in the box, 60 and 40 cm) for Kalina , and don’t load your head with crap like diagrams of the torsion and twist of the “windshield wipers” during And what leashes should be installed on the VAZ? That’s the problem, and not only with the VAZ. Alex.ru. boils down to replacing the rear wiper with a wiper from Kalina
1. Someone tried to rivet the wiper mounts, installed different springs. I simply bent the rear wiper handle (the steel plate on which the windshield wiper blade is held) more strongly. As a result, I installed a relay with an adjustable wiper pause on Kalina - it’s a comfortable thing, you can set the clearance between the strokes of the brushes and first Any
wipers (up to 400 rubles per set) scrape at the factory. They install some unbearably cheap brushes that they The mechanism of operation of the wipers on a Lada Kalina
is quite simple.
Even if the windshield wiper blade breaks down, every car owner will be able to fix the problem. True reviews about various brands of wipers, windshield wiper blades. Lada Kalina has excellent blades (I’ve been installing these for the summer for the 3rd year now) they are enough for about a season, but in winter they freeze up like an ordinary frame from any manufacturer lkforum.ru/showthread. php I would like to install regular blades, because the standard ones are unsafe for me and those around me - I don’t work at all, the snow sticks in general, it’s terrible, but by the way, if you want to save money, then just remove the wipers , rinse, dry and drop some engine oil into the hinges with a pipette, only the wipers . From a new perspective I have special requirements for windshield wipers.4. We place the leash vertically with the hook up and with light blows on the hook we drive the lever into the base to the required 2-2.5 cm. Thanks to the rust, it is very comfortable to evaluate, on I went to a car store, bought brushes for viburnum
(as it was written on the price tag) for 370 rubles. Goes here and there on a janitor's leash and that's it. It is not correct. (for sure).

Replacing wiper blades (+ video)

The blades are removed and the lock on the end of the windshield wiper is unfastened. Next, the rubber bands that are mounted on the frame are removed. Work must be done carefully. Next, new brushes are installed. If necessary, they are trimmed. You need to use scissors for this. The new rubber bands are tightly attached to the windshield wiper. Here you may need to straighten the fasteners or push the brushes under them. In the first option, you can accidentally damage the terminals, and in the second, you can fiddle with the work for a long time. Here everyone should choose the most convenient method for themselves.

As you can see, replacing and repairing wipers is a fairly simple job. This does not require certain skills and knowledge from the driver. The main thing is to understand the design of this system and know where to look for a fault. You also need to be quite careful when carrying out work. In winter, you need to make sure that the brushes are not frozen and there is no ice on them, as this can lead to damage to the glass.

Let's sum it up

The article provides basic recommendations on how to choose the right one, as well as how to remove and install a rear windshield wiper for LADA Kalina station wagon. Situations with partial or complete loss of functionality of the mechanism, and what to do if these problems arise, are also discussed.

We recommend choosing a high-quality rear windshield wiper, which will not only effectively clean the surface of the stern glass, but will also last much longer.

The length of the windshield wipers on the Lada Kalina on the driver’s side reaches 24″ (610 mm), on the passenger’s side – 16″ (406 mm), on the rear – 14″-16″ (360-406 mm).

Possible sizes of wipers on Lada Kalina:

The size of brushes for Lada Kalina depends on their location and the type of car body.

Wiper parameters for hatchback and station wagon:

  • Length of driver's windshield wipers: 610 mm (24″).
  • Passenger wiper length: 406 mm (16″).
  • Rear wiper length: 360 mm (14″).

Windshield wiper parameters for a sedan:

  • Length of driver's windshield wipers: 610 mm (24″).
  • Passenger wiper length: 406 mm (16″).
  • Rear wiper length: 406 mm (16″).

Important: only frame and frameless types of wipers can be installed on this Lada car model.

To avoid difficulties when replacing wipers, the manufacturer recommends selecting brushes of standard sizes.

General parameters of Lada Kalina wipers
Drawing General view of the windshield wiper bladeDriver (in) Driver's side front:

Possible sizes of wipers on the driver's side for Lada Kalina of all years of manufacture.

Data in inches.

Possible sizes of wipers on the driver's side for Lada Kalina of all years of manufacture.

Data in inches.

Possible sizes of rear wipers for Lada Kalina of all years of manufacture.

Passenger (in) Front passenger side:Rear (in) Rear:
(drawing of wipers)24»16»16»
Lada Kalina wiper size tables
Year Model yearDriver (in) Driver's side front:

Possible sizes of wipers on the driver's side for Lada Kalina of all years of manufacture.

Data in inches and (mm).

Possible sizes of wipers on the driver's side for Lada Kalina of all years of manufacture.

Data in inches and (mm).

Possible sizes of rear wipers for Lada Kalina of all years of manufacture.

Data in inches and (mm).

Disclaimer: Although the data represents official manufacturer figures, the information above is for reference only and is not guaranteed to be completely accurate.

Alca Winter

  • Price - from 483 rubles.
  • Length - from 33 cm to 65 cm.


The top of the best winter windshield wiper blades for 2021 continues with a Chinese model from a German brand in a rubber cover, designed for passenger cars.
Advantages: thanks to the protective casing, ice does not clog inside the brushes, so you do not have to constantly beat it off. In snowfalls and severe frosts, the wipers do not freeze much. They cope with stuck snow effortlessly, which reduces the consumption of anti-freeze. Most reviews also note the low price of the brushes.

Disadvantages: modest appearance, at a speed of more than 100 km/h they do not cope well with the task, which threatens an accident. So if you are a fan of driving on the highway in snowfall, then this model is not for you. At above-zero temperatures, they may leave small marks on the glass.

What other points to consider?

When choosing accessories for LADA Kalina, it would be useful to take into account the shape of the glass, and this applies not only to the front part, but also to the rear, as well as the size of the windshield wiper blades. If the front glass is curved outward, then the best option for it would be to purchase and install cheap brushes of a frame structure. This is caused by the inability of the frameless option to effectively clean glass of this shape. During operation, such products will leave marks on the surface in the form of stripes located on the outer edges of the cleaning zone.

When the glass is mostly endowed with a flat shape, and there is almost no convexity, then in this option you can safely purchase high-quality frameless products; the size of the windshield wiper blades plays an important role. The cleaning efficiency here will be at its best.

Let us note that it is frameless wipers that are able to fit tightly to the glass surface, over time creating areas of abrasion on it. However, the first scratches or significant abrasions appear after many years of use. It is recommended to test the products before purchasing them directly. This will allow you to gain an understanding of the pressing density and cleaning efficiency.

Bosch Aerotwin

  • Price - from 670 rubles.
  • Length - from 34 to 80 cm


And in first place among the best winter wiper blades was a Serbian-made model. How does it surpass its competitors? Firstly, a wide range of sizes. Secondly, it completely follows the curves of the glass and does not stiffen in frost (down to minus 10 degrees). Thirdly, it lasts for a very long time, from 2 seasons or more.

It is not without its drawbacks: high price, squeaks, some car owners complain about thin stripes on the glass after using Bosch Aerotwin.

A good windshield wiper should smoothly remove water, snow and slush from the glass, without squeaking, rattling or rattling. If you notice these problems, or if your windshield wiper regularly leaves streaks or runs streaks of water, it's time to replace it with a new one.

Our rating of windshield wipers for winter is designed to ensure that you don't end up in a sticky situation. For example, we didn’t get stuck on the side of the road in a snowstorm because the windshield wipers failed to remove the ice that had formed on the windshield.

Tip: If you notice that your windshield wipers are not working well, try cleaning the rubber blade first. Sometimes that's all it takes to get a few more weeks or months of wiper service. Dampen a clean paper towel or cloth with a little water, washer fluid, or alcohol and wipe along the edge of the wiper blade. The edge should be sharp and smooth, without nicks, chips or gaps, and the rubber should be pliable without cracking.

In winter, carefully scrape ice off your windshield before using your windshield wipers, as ice can strip the rubber or damage the edge of your windshield wipers.

Types of device

To choose and purchase the best wipers for Kalina, you should study the main types of mechanisms, as well as their fundamental differences and sizes.

There are several main types of cleaning products for this model of vehicle:

  • not having a frame base;
  • based on a frame.

Each of the above types has its own advantages. However, negative traits are also inherent in each of them.

The first type (frameless) has a high percentage of service life. This advantage is associated with correct manufacturing. The manufacturer uses only high-quality plastic and rubber. This approach extends the “life” of the Granta brush. A long period of operation does not affect the functionality; the rubber bands do not wear out quickly.

Extraneous sounds will not irritate the person driving or his passengers. The cleaning device is soft even with a large minus. He is not afraid of constantly changing temperature conditions.

Of the negative aspects, only one criterion can be highlighted - the inflated price tag. Car enthusiasts who own the Kalina 2 brand often turn a blind eye to this minus, since there are many more positive parameters. But not every brand of car is suitable for such a device.

The second type is made on the basis of a frame. It is made of metal with plastic components inside. The cost of such products is low, so you can find them in almost any specialized auto store.

This mechanism has more disadvantages than the previous one. Companies do not plan to use expensive raw materials in their production. This leads to constant wear and tear, which the consumer does not like. According to average statistical data, normal operation of the product is observed for one to two years. After this period of time, car owners replace the mechanism.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]