In the article we will select windshield wipers for the Lada Vesta, consider the most popular options for all types of blades, give article numbers from trusted manufacturers, find out the type of mounting and size of the Lada Vesta wipers.
The range of windshield wiper blades for almost any car is now quite wide and the issue of replacing blades does not pose any problems for the car enthusiast.
Wipers for Lada Vesta
Timely replacement of windshield wiper blades ensures effective cleaning of the windshield and good visibility, which affects safe driving.
Wiper wiper sizes for Lada Vesta
On all modifications of the car, including the Lada Vesta SV Cross, the size of the wipers is the same. The manufacturer recommends the following sizes:
| Wiper blade type | Length, inch | Length, mm |
| Driver's license | 24 | 600 |
| Passenger | 18 | 450 |
| Rear | 12 | 300 |
Size of Vesta blades
On specialized forums and on the blog, there are positive reviews about the installation of non-standard wipers on Vesta measuring 610/480 millimeters and even 650/480 (the size of the driver's and passenger's wipers, respectively).
We recommend using the brush size recommended by the manufacturer for Lada Vesta
The rear wiper on Vesta SV is installed in sizes up to 330 mm.
Disadvantages of standard Lada Vesta wipers
The main disadvantage of the standard Lada Vesta windshield wiper blades is that the size is insufficient to optimal condition. The wipers work fine under normal conditions. With the onset of cold weather, drivers experience minor problems with cleaning their windows. The quality of the rubber requires better performance, since the wipers do not fit tightly to the glass.
When it rains, due to the lack of windshields, water flows from the front window onto the glazing of the driver's door, limiting lateral visibility.
Type of fastening of wipers on Vesta
A very important point for Vesta owners. Indeed, despite the rather short period of inlet of the model, the type of fastening managed to change. Therefore, before purchasing new brushes, you should definitely check which mounting option is used on your car.
Wiper fastening type until 2021
According to the type of fastening of windshield wipers used on the Lada Vesta, this is the most common type - a hook . This type of fastening is used on most car models, including modern foreign cars.
New type of wiper mount on Vesta 2020
On cars produced after 2021, leashes with mounting for valt5.1 (or GWB046) began to be installed. The type of fastening was announced in 2021 and is used mainly on Renault vehicles, for example Renault Kaptur and on some Renault DUSTER
Optimal wiper sizes for Lada Vesta
It is not enough to buy the most expensive windshield wiper to be sure of the effectiveness of its use on the Lada Vesta. A much more competent approach is to select a set of wipers for a specific model or line of cars, the design of the frame of which takes into account the shape of the car’s windshield.
The same set of brushes may fit tightly on one car, but leave untreated areas on the glass of another.
Front
The size of the Lada Vesta windshield wipers can be made symmetrical, although most owners prefer to replace only the driver's wiper. The Lada manufacturer determined that for the Vesta series a brush 60 cm (23.6 inches) long would be a compromise option.
Size of Lada Vesta windshield wipers
Wiper ends larger than 62 cm (24.4 in) in length do not reach the surface of the glass due to its bending.
Rear
From the factory, Lada Vesta receives a rear wiper 28 cm (11 inches) long. These values are sufficient to keep the area visible to the driver through the rear view glass clean.
If desired, it is possible to replace the brush with a frame model up to 33 cm long, which will have a positive effect on the coverage radius.
Frameless wipers for Vesta
For cars with the old type of fastening - hook
The range of windshield wiper blades for Vesta for this type of mounting is very wide. You can easily find ready-made kits or individual brushes from renowned manufacturers, as well as much cheaper alternatives.
I would like to start the review of frameless brushes on the Lada Vesta with an excellent set from the company Bosch AeroTwin AR604S (part number of the set - 3397118908 ). A ready-made set of two brushes specifically for this car, with original mounting and size. At the same time, they clean well, quietly and are durable.
A set of brushes from the premium segment SWF Visioflex (article - 119761). Asymmetrical spoiler, excellent cleaning, easy installation.
Another high-quality option is TRICO FORCE series. These are two separate brushes with article numbers TF600L and TF450L for the driver and passenger, respectively. High quality, silent operation of the brushes and effective cleaning of glass even in winter.
A good option is a pair of individual frameless brushes from the Denso Flat series DFR-009 and DFR-002, respectively. A distinctive feature of these wipers is that they work well in rainy weather. Low noise, strong and durable.
Alca wipers of the Super Flat series 600 mm and 450 mm
For machines with a new type of fastening
After 2021, Vesta began to install leashes with fastenings for valt5.1 (or GWB046). Of course, the range of brushes for this type of fastening is significantly smaller. Especially if you are looking for brushes without an adapter. Adapters and adapters are not liked by many owners because of their bulkiness and difficulty in installation.
Here are excellent sets of brushes specifically for the new type of fastening:
- Bosch Aerotwin A 312 S (article 3397014312).
- SWF VisioFlex OE 482 (article 119482)
- Valeo Silencio Flat VF940 (article 577940).
Some owners simply change the leashes to the old version with a “hook” fastening, which greatly simplifies the selection of brushes.
Hybrid brushes
Do you prefer hybrid brushes? This option is only available for hook type mounting.
Denso Hybrid DUR-060L and DUR-045L wipers . Brushes from this company, although quite expensive, have rightfully earned many positive reviews, both based on the results of tests by experts and real users. Read more about hybrid brushes, their advantages and disadvantages in this article.
Another option is the Valeo First Hybrid VFH60 and VFH45 for the driver and passenger, respectively.
A pair of hybrid wipers from SWF HBlade for Vesta. Articles 116183 and 116176.
A more budget option for hybrid wipers is Heyner “Hybrid” , a pair of brushes with the following article numbers 034 000 and 028 000
Frame brushes
Are you looking for a more affordable option, or just prefer frame brushes? Then I can offer you the following options for attaching a “hook”:
- Set of two brushes with spoiler Bosch Twin Spoiler 604 S ( 3397118303 ).
- Another good set is SWF Das Original frame brushes (article 116346 ).
- Separate brushes Denso DM-560 + DM-045
- One of the most affordable options from premium brands is a set of frame wipers Bosch ECO 602C (3397010253).
What are frameless wipers for a Lada Vesta car?
Having figured out the size of the wipers on the Lada Vesta, let's move on to choosing a company. The basic option is frame cleaners for the Lada Vesta. They are easy to pick up and reliable. This is an average option that suits many drivers. The frame blade has disadvantages, which is why more drivers are switching to frameless wipers. On our own behalf, we recommend installing frame wipers in the summer, and rubber-coated frame or frameless ones in the winter.
Top list of recommended frameless type cleaners:
- RainBlade Advanced;
- Trico Flex FX;
- Bosch Aerotwin;
- Valeo Silencio X-TRM.
They have a frameless design, these brushes belong to the new generation. If you want to supply modern, high-quality purifiers, take note of these manufacturers. The Denso hybrid brush (article dur 045l) is now popular - an average solution.
Hybrid brushes are a hybrid of conventional brushes with a frame and frameless ones. In terms of quality of work, this is the best solution, because it absorbs the qualities of both brushes. They clean in frost and rain better than their older brothers. A tight fit is achieved by hinges and a rocker arm, and the casing creates additional aerodynamic pressure, like a wing. At any speed, the contact with the glass is sufficient for high-quality cleaning of the windshield. The disadvantages include the price - these consumables are almost 2 times more expensive than their counterparts.
Among the manufacturers we can note:
- Denso - price from 450 to 1650 rubles;
- Phantom - from 450, Heyner - price from 350 rubles;
- Dupont (article DP7618) - from 450 rubles.
When it comes to frameless wipers, car enthusiasts and professionals have done research to determine that RainBlade Advanced glass cleaners are the best on the market. They are not expensive, like, for example, Bosch products and perform excellent work. This is the case when there is no saving in quality. The company's products work well in cold weather. The brand has only recently entered the market, but has already earned a reputation. Drivers choose it due to its low price, and the characteristics of the brushes are not inferior to models from the TOP segment.
The manufacturer took care of the convenience of users and developed the RainBlade mobile application. A simple program allows you to select the size and model of brushes without complications. It would seem like a simple solution, but only Bosch owns such an application; other manufacturers do not provide such conveniences.
As a result, RainBlade Advanced products are a quality option relative to the price. Thanks to the choice of these brushes, we will get top quality, and the price is lower than for average models. RainBlade is a new model on the market, so it has not yet taken a strong position. In the future, it may take a leading position.
How to install brushes
Installation of hook type brushes is very simple. It is necessary to pull the leash with the old brush towards you, remove the old one by pulling it out of the leash, then release the new brush from the packaging and install it on the leash adapter. On the Internet you can find many videos showing the process of installing brushes with detailed comments. If it seems difficult to install yourself or the driver is a girl, you can use the services of a car service.
But installing wipers with mounts under valt5.1 is somewhat more difficult, although there are no particular difficulties here either. Video of installing wipers is below
Good luck with your purchase and further use.
What size of wipers (brushes) to choose for Lada Vesta
To ensure high-quality cleaning of the windshield, it is recommended to change the windshield wiper blades according to the season (one set for winter, another set for summer). In practice, car owners install new brushes only when the old ones no longer cope with their duties or begin to creak.
Lada Vesta has standard frame-type wipers with dimensions:
- driver's - 600 mm;
- passenger - 450 mm.
The owners of this car do not complain about the performance of the standard brushes. There is no rush to change them to frameless ones to improve glass cleaning, but the result can be improved. This is not about choosing the manufacturer/company of the accessory, but about the size of the wipers. After taking measurements it turned out that:
- the distance between the brushes in the resting position is 35 mm;
- from the edge of the passenger brush to the right body pillar - 40 mm;
- from the edge of the passenger blade to the top edge of the glass - 80 mm;
- from the edge of the driver's blade to the top edge of the glass - 50 mm;
- from the edge of the driver's brush to the left body pillar - 280 mm.
Based on these readings, you can install longer blades, which will increase the cleaning area of the windshield. For example, replace the driver's 600 mm brush with 610 mm, or the passenger's 450 mm with 480 mm.
What size wipers do you use on Vesta? Is the standard cleaning area sufficient for safe and comfortable vehicle operation? Take part in the survey, leave your feedback and recommendations. Let us remind you that other improvements to the sedan can be found in this category or by content.
Categories of products that may be of interest to you based on the article “What size to choose for windshield wipers (blades) for Lada Vesta”:
Design of windshield wipers Lada Vesta SV
Lada Vesta is the most progressive and developing project of the domestic automaker. I can’t say that only the most advanced developments were used in the car. But structurally, Vesta is as close as possible to its foreign competitors - Hyundai Solaris, Kia Rio, Volkswagen Polo. The windshield wiper design is similarly borrowed from competitors. Of course, with its own shortcomings and characteristics.
The windshield wipers are driven by a conventional electric motor, which moves the windshield wipers through a trapezoid.
By the way, when disassembling the Lada Vesta sedan, it turned out that the motor is manufactured by Bosch, but in China. However, the Chery logo on the motor body paints a complete picture - most likely the trapezoid with the motor was adapted from some model of the Chinese brand. You may not see such a picture in the latest models, but this is exactly what happened in the early Vesta models.
Vesta is equipped with regular frame windshield wiper blades from the factory. Yes, these are the cheapest options and will most likely have to be changed after the first trip in rainy weather.
➤ The right choice of wipers for Lada Vesta
Owners of domestic cars are forced to update their windshield wipers annually due to poor manufacturing quality. They are often replaced with imported analogues, which last for several years in a row.
Dimensions of standard wipers on Lada Vesta
| Position | Dimensions in millimeters |
| Fastening method | Hook |
| Driver's side length (2015 - 2021) | 600 (24 inches) |
| Passenger side length(2015 – 2021) | 450 (18 inches) |
| Width | 15 |
| Rubber strip height | 0,75 |
| From the driver's wiper to the top point | 50 |
| -/- to the left pillar | 280 |
| From passenger wiper to top | 80 |
| —/— to the right pillar | 40 |
| Distance between wipers in folded position | 35 |
How long are the wipers on Vesta?
Windshield wiper blades can be divided into three types: framed, frameless and hybrid. The best option would be frame wipers.
We recommend using windshield wiper blades from such companies as: Champion, Bosch, Denso . The wipers from these manufacturers will wipe the glass well and have the best price/quality ratio.
Champion - 600 mm (item ER60/B01) and 450 mm (item ER45/B01). Bosch - (article 3397118908). Denso hybrid - 600 mm (article DUR-060L) and 450 mm (article DUR-045L)
Wiper size:
- The size of the left windshield wiper of Lada Vesta is 600 mm (24 inches).
- The size of the right windshield wiper of Lada Vesta is 450 mm (18″).
- Fastening type - hook.
Also, many Lada Vesta car owners will benefit from an article on our website about the lamps used for this car model and detailed instructions for their correct and convenient replacement.
Windshield wipers Lada Vesta SV - dimensions, article number, do-it-yourself replacement
Home / Information Repair / Wipers Lada Vesta SV - dimensions, article number, replacement
Wipers of the Lada Vesta SV are one of the very important systems of the car. Regardless of the make or model, your windshield wiper blades are a very important system. Visibility depends on the correct operation of the windshield wiper blades, which means that in a critical situation this can play a decisive role. Those. We have concluded that windshield wiper blades both directly and indirectly affect driver and passenger safety.
Of course, if we are talking about driving in dry weather, then little depends on the wipers - everything is already clearly visible. They just lie on the edge of the glass and no one pays attention to them. But when it starts to rain or snow, the wipers are immediately remembered.
Size of wipers Lada Vesta, SV and Cross
All cars made on the basis of the Lada Vesta, namely the SV and SV Cross station wagons, as well as the Cross sedan, have the same size wipers. This is done for maximum unification. Here's what we have:
Exploitation
During the operation of the standard brushes on the Lada Vesta, it becomes clear that this element in the Russian car functions satisfactorily with several minor drawbacks:
- In severe frosts, the wiper heats up and does not adhere to the glass so tightly; as a result, the wiper blades fight dirt, ice and snow on the window ineffectively in such circumstances.
- When turning on the windshield wipers on the Lada Vesta during rain, be prepared for water to get from the front window onto the glass of the left front door, as a result of which visibility is seriously impaired.
- The wipers themselves are quite flimsy, the basic length of the blades is short.
Options for replacing Lada Vesta wipers
In order to make it easier for you to search for new brushes on the Internet, we decided to turn to the spare parts catalog.
Lada Vesta brushes have the following article numbers:
Bosch 3397118908 — set of front brushes 60 cm + 45 cm Bosch 3397011306 — rear brush Lada Vesta SV 33 cm
By the way, the mounts on the brushes are ordinary hooks, as we are accustomed to seeing on all Asian cars (Toyota, Nissan, Kia, etc.) and domestic ones (Priora, Kalina).
To replace, you can use brushes of a larger size - 610 mm and 480 mm. They stand up great and clean better. The rear brush is 30 cm from the factory, but you can safely set it to 33 cm.
By manufacturer, we can mention Denso brushes (expensive, but worth it) and Lynx (cheap, but enough for a year and a half). Bosch also copes with the task, judging by the reviews, but I personally have never used them.
