Making an acoustic shelf for a VAZ 2109 with your own hands

Why VS auto?

Advantages of our store:

• large selection of car accessories;
• low prices;
• products are accompanied by certificates, which confirms high quality;
• prompt delivery to any region of Russia;
• free consultation with a manager;
• discounts are provided;
• promotions are valid.

If you need a VAZ 2114 acoustic shelf with sidewalls, select a model in the catalog, leave a request on the website, or contact the manager by phone.

We guarantee high quality of goods and speed of delivery.

Delivery and payment for acoustic shelf

Delivery: Orders are sent to the regions by transport companies and Russian Post.

Payment: Payment in cash - made upon receipt of the goods in the office or upon meeting with the courier in Tolyatti, as well as by bank receipt (Form PD-4), VISA, MasterCard, Maestro card, through SberBank to a card account.

What to do?

There are three ways to solve this problem. The choice in favor of one option or another directly depends on your requirements, wishes and sometimes financial capabilities.

Having a stronger and thicker shelf not only eliminates noise, but also improves the sound quality of the audio system. The thick shelf acts as a highly efficient enclosure.

Today we will look at how you can create an acoustic podium with your own hands, which will be placed on factory sidewalls. You can also try to make an option with your own sidewalls, but it is much more complicated and extremely difficult for a beginner to cope with. Let's not make things difficult for you. The option with standard sidewalls is very good.

Tuning VAZ 2109

As mentioned earlier, the optimal price-quality option for a sound system on a VAZ 2109 would be to install 4 speakers, two in front and two in back. There are no problems with the front seats, since there are standard places for 13-inch speakers in the front panel. For those who don't have 13 inches, they can make podiums for the front doors and install speakers with a diameter of 16. The rear standard places for speakers in the plastic inserts on the sides of the rear shelf are no good - they are too small to reproduce more or less noticeable bass, and the standard shelf is too flimsy to support the 6x9-inch oval speakers that are most suitable for placement in it.

Crib

Instead of a conclusion, let's summarize:

1. You can plug in budget sound into the Grant for an amount of 20,000 rubles or more.
2. Podiums in the front doors = impossible to open the glove compartment.
3. 16 cm speakers in the front doors - cut the metal of the door or prepare spacers with the factory facing of the speakers.
4. The acoustic shelf covers the ISOFIX mounts.
5. Audio preparation pulls wires only in the doors.
6. Article numbers for ordering speaker covers and mounts are in the “Installing speakers in rear doors” section.

Did you like the article? Write a comment or see what we have about the selection of budget cars for 200 thousand.

What can a shelf be made from?

MDF shelf drawing

A common material for an acoustic shelf is MDF or multi-layer plywood. Be sure to cover the surface of these materials with carpet or other acoustic material to ensure compliance with the overall design of the interior. As for the area for installing speakers, they must be made so firmly that they completely eliminate rattling and vibration.

Shelf material

The standard design is made of impact-resistant polymer material.

A tuned version of a shelf made of wooden inserts - supports, covered with felt fabric, which also serves as a noise absorber.

At the customer's request, the shelf for acoustic speakers can be made of special wood. This is practiced if you want to achieve an “ideal” sound. Obviously, the cost is several times more expensive than analogues.

Making a shelf with your own hands

Acoustic shelf for VAZ 2109

So, if we decide to make a shelf with our own hands, then go ahead. A ready-made acoustic shelf costs about 1,000 rubles in a store. Why waste extra money if you can make everything yourself, spending some of your time and receiving inexpressible pleasure from the process. A homemade shelf has advantages over a purchased one, and it’s simply impossible not to notice.

Start

To make a shelf for a VAZ 2109, you will need to prepare.

Materials

• Plywood or MDF.
• Macroflex.
• Glue (one can is enough).
• Several meters of carpet.
• Self-tapping screws.
• Polyurethane foam.
• Sanding paper.
• Standard rear shelf made of plastic.
• Small nails (furniture).
• A simple pencil.
• Tape measure or simple ruler.
• Screwdriver.
• Drill with drills.
• Brush.
• Construction stapler.

Tools

Note. As mentioned above, the ready-made standard shelf of the VAZ 2109 is used as a model. Therefore, it will need to be removed. A simple screwdriver, a little patience and time - the shelf is dismantled.

• We place this very shelf, cleaned of dirt and dust, on a flat table.
• We lay a sheet of chipboard on top.
• Take a pencil and carefully trace the edges intended for the seat belts.
• Draw ovals for the speakers with a pencil.

How to mark an acoustic shelf

Main stage of work

Acoustic shelf for VAZ 2109

This includes the manufacture of acoustic podiums, the construction of a box for seat belts, pasting and much more.

Podiums

• We also make the base of the podiums from chipboard.
• We work with a jigsaw.
• To give the structure additional rigidity, you need supports made of bars measuring 20x40 mm. There should be several pieces of bars and they are inserted between the ovals using screws.

Note. The podiums, as mentioned above, are made on a separate piece of chipboard.

• We place the podiums on a standard shelf and trace them with a pencil.
• We also mark with a pencil the places of the round holes intended for air intake from the trunk.
• Between the bars of the podium, voids appear that need to be filled with sealant. As for the holes inside the product itself, they are covered with cardboard. This will prevent the foam from falling out during the drying process.
• Fill with polyurethane foam.

DIY shelf

• We wait until the foam dries completely.
• Take a sharp knife and carefully cut off the excess.
• We process the surfaces with sandpaper.
• Now we impregnate a piece of nylon with epoxy glue and wrap it around the entire structure. This is done for strengthening and strength.

How to make an acoustic shelf for a VAZ 2109

Making a box for belts

Note. When making a box, the following point must be taken into account: the belts must enter the box from the side.

• We outline the places with a pencil.
• Cut with a jigsaw.

Covering with carpet

• Pasting can be done using clothespins.

Note. After these operations, the boxes are assembled and screwed in place.

The final stage of work

• The final stage involves installing the manufactured shelf in place. Bolts attached to the metal part of our “nine” can be used as clamps. The nuts must be attached to the trunk side.

Car radio installation

Acoustics in Lada Granta

The car radio for the Lada Granta must be selected in such a way that its connection corresponds to the 1 din connector.

Note. You can also install a car radio with 2 din on the Lada Granta, but then you will have to cut out the partition and adjust the frame in the console to the size, which is very, very labor-intensive.

• We dismantle the plastic pocket that stands in place of the future car radio. We use a flat blade screwdriver. On the back of the pocket we see slots where you will need to insert ISO connectors.

Installation of car radio in Lada Granta

• The metal frame is removed from the radio and installed in the same place where the pocket was removed. We unbend the frame's antennae and securely fix it.
• We connect the connectors to the car radio. Then we insert it into the frame.

We check the operation of the car radio, and if it is functioning normally, then we move on to the next stage of our operation.

Features of fastening and removal

Despite the apparent simplicity of this operation, the process of removal and reinstallation should not lead to subsequent rattling or distortion. The fact is that the material from which the rear shelf is made is quite fragile and cannot withstand even a small load. Therefore, the need for careful removal and installation is directly related to the longevity of its use. In some cases, you even make a VAZ 21099 shelf with your own hands.

The fastening of the shelf, taking into account the fragile plastic used on the VAZ 21099, is carried out using special plastic pistons. To release them, you need to remove the central part of the piston, after which it can be easily removed by hand. Having released the pistons, remove the central shelf.

Typically, removing the center shelf alone is not sufficient to gain access to the top of the shock absorber. At the edges, the rear shelf is attached to the side ones, which are where the speakers of the acoustic system are installed.

The speaker shelves are attached to the internal panels using a self-tapping screw and a piston similar to the one discussed above. Therefore, by carefully unscrewing 2 screws and releasing the piston, you can gain access to the shock absorber strut and standard acoustics. To raise the shelf you need to remove the wires from the speaker tips.

After removing the central part and the side elements that make up the rear parcel shelf, you can replace the struts and gain access to the torsion bars of the trunk lid hinges.

Manufacturing

Making a shelf, no matter how difficult it may seem at first glance, is a quick task. First you need to prepare the following materials and tools:

Acoustic shelf for VAZ 2108

Note. An acoustic shelf can be made in different ways. The best type in the VAZ 2108 will be a shelf with an opening part.

Manufacturing instructions

Acoustic shelf VAZ 2108 yourself

Note. After the canopies are installed, we are in no hurry to screw on the opening part of the shelf. First, you need to cover the two parts separately with carpet, and only then connect them.

Note. When covering with carpet, do not forget that you need to leave a margin around the edges. As for the glue, if possible, it should be applied not on the entire shelf at once, but in strips. This way, the glue will dry better, and it will be very difficult to ruin the work.

The instructions for making an acoustic shelf with your own hands are written in clear language and represent a ready-made solution. If the user wants to change some stages of the work, we recommend studying video reviews about this, which are full on the Internet, or at least looking at photo materials. The price of an acoustic shelf in stores is not high, but still, it is advisable to make it yourself.

Source

How to make a trunk shelf on a VAZ 2109

Today it is rare to meet a car enthusiast who is content with the standard equipment of his car. Modern drivers are increasingly engaged in styling (from the English word “styling” - style), i.e. change the interior of the car and its appearance in order to stand out from the general flow of vehicles. At the same time, owners of domestic cars do not lag behind the owners of foreign cars, and sometimes even surpass them in design ideas translated into reality. In this article we will give an example of how to make a trunk shelf on a VAZ 2109 with your own hands at the lowest cost from simple and affordable materials.

We cut according to the template.
Tools that will be needed for work:

• decorative handles for furniture;
• plywood;
• cardboard;
• upholstery material;
• adhesive mixture (universal glue);
• two hinges for furniture.

Shelf reupholstery

Upholstery material

Reupholstering the acoustic shelf on a VAZ 2109 can be the most problematic part of the job. That is why we devoted a separate chapter to it in our publication. Every owner of a VAZ 2109 dreams of making the interior of their “nine” more comfortable and attractive. An acoustic shelf is not only an element that serves a practical purpose, but also a separate component of the entire interior. For this reason, she needs to be able to give a style that is beautiful and consistent with the overall design. The material most often used is carpet. On the other hand, if the interior itself is covered with leather or a substitute, or maybe Alcantara, covering the shelf with the same material will come in very handy.

Trunk upholstery VAZ 2109

Replacing trunk upholstery for VAZ cars

Upholstery (lining) of the trunk of any car is a necessary thing in many respects. Moreover, as practice shows, it often performs not only utilitarian functions, but also purely aesthetic ones. A classic example is the lack of upholstery on the top trunk lid of Grant model cars. Many drivers do not like it when metal and not very beautiful three recesses are visible when the cover is open. This fact was used by a number of manufacturers who began to produce and sell upholstery options for the top cover to owners of cars of this brand. And quite expensive.

Trunk upholstery, even made from high-quality materials, will wear out or become damaged over time. The operating time largely depends on what and under what conditions the driver transports in the trunk of his car. If you are faced with just such a situation when it is necessary to replace the car trunk trim, then refer to the catalog of our store, and we will not only promptly deliver the ordered goods, but we will also briefly tell you how to replace the upholstery yourself.

This procedure is quite simple on many VAZ family cars. To do this, you only need a Phillips and slotted screwdriver. This operation is performed in several stages (for VAZ 2106, 2105, 2107):

1. Using a slotted screwdriver, you need to disconnect the plastic buttons for the rear mounting of the trunk mat.
2. In the same way, you can disconnect the three rubber buttons on the front fastening of the trunk mat and remove it from the car.
3. Using a Phillips screwdriver, you need to unscrew six (or more, depending on the modification) screws securing the rear trunk trim.
4. Now you can remove the rear trunk trim.
5. Using a Phillips screwdriver, you now need to unscrew the five screws and remove the right trunk trim.
6. Then, using a Phillips screwdriver, unscrew the six screws and remove the left trunk trim along with the spare wheel cover.
7. Using the same screwdriver, remove the self-tapping screw and the trim of the rear left arch.

Now you can install the new trunk trim. The procedure is performed in reverse order.

How to buy?

The order can be placed directly on the website, by filling out an application form, or by phone or in person, directly in the store at the Fortuna-Don car market.

Purchasing goods on the site occurs as follows. By clicking the “quick order” button, you are taken to the page for filling out the form. After filling out all the fields and checking the information, you click the “Place” button, confirming the order. After that, you can choose a payment and delivery method convenient for you.

How to pay?

Payment for goods is possible in any way: by cash or bank transfer, or using a plastic card. If you use the purchase form through the website, the order is transferred to work after assigning it the status “paid”.

How to receive the goods?

When placing an order in any form (via the website, by phone or directly in the store), you can choose a delivery method that is convenient for you. The goods can also be picked up in person by visiting our store at the Fortuna-Don car market, or you can choose the desired delivery method, including courier delivery.

Step-by-step instructions for independent production of VAZ 2109

The workpiece is ready

First of all, you should determine the points at which the decorative handles of the future design will be fixed, and then drill the holes necessary for mounting the clamps and installing the handles in the selected places.

Cutting out the moving part

Next, you can proceed to making the shelf template. It is important to consider that the structure will have a moving part, which must be marked on the cardboard template using cuts. It is strongly recommended to make sure that if the moving part of the structure is lifted, it does not come into contact with the arches of the trunk of the car.

After all the necessary markings have been made on the cardboard sheet, it should be attached to the plywood and the future shelf should be cut out strictly according to the size of the template. This stage of work requires special concentration, because only if it is carefully cut will the shelf fit into the trunk slots.

Holds on with latches

At the next stage, the lifting part of the structure is cut out of plywood, after which it must be connected to the stationary part of the shelf using hinges. In a horizontal position, the lifting part will be held by latches installed on the edges of the shelf.

After installing the shelf, you can begin to check its functionality. You should make sure that the shelf sits securely in the trunk connector, and only then start sanding it using fine-grit sandpaper.

Provides good access to the trunk

The upholstery of the shelf is carried out with pre-prepared material, the dimensions of which are measured according to the finished shelf with small tolerances. The principle of applying upholstery is simple and is divided into several stages:

1. First, a layer of universal PVA glue is applied to the shelf. After some time, when the first layer has dried a little, you need to apply the glue again.
2. The upholstery material is then carefully applied to the top of the shelf. In this case, the material cannot be stretched, because Once dry, the fabric will shrink in size and may leave gaps on the shelf that are not covered by the fabric.
3. The lower part of the edge should be upholstered according to the principle of upholstering the upper edge, but if desired, instead of glue, you can use double-sided tape to fix the fabric.
4. After the upholstered shelf has completely dried, it can be installed in place. At the same time, you should once again make sure that the shelf sits firmly in its seat. Any defects that were identified during the final inspection must be corrected.

Additional Information

The lid rises with the trunk.
If desired, the shelf lid can be connected to the trunk door using a spring or rubber band. In this case, the lifting part of the shelf will rise along with the trunk door.

In conclusion, it is necessary to pay attention to the financial component of the issue. Self-manufacturing of a trunk shelf for a VAZ 2109 will cost the vehicle owner much less than the cost of services from service station specialists.

What is the volume of the body of a VAZ-2109 car?

Inside, the trunk suits car owners and does not cause any complaints, although its dimensions are somewhat smaller than those of the Priora and Kalina. The latest models are quite large, for which car enthusiasts appreciate them. But the VAZ-2109 also has its advantages and features. The car can comfortably fit 5 people of average weight. The low-mounted dashboard is very convenient; modern electronic components can be built in there, but this requires a lot of money. A small drawback of the body is that it is made of plastic and noise is occasionally heard. Subsequently, the trunk requires technical modernization. This is not difficult to do, and the financial costs for this work are insignificant.

Product delivery options

Note! Below are the shipping methods available specifically for this product. Payment options may vary depending on the shipping method. Detailed information can be found on the “Delivery and Payment” page.

Parcel by Russian Post

Available payment methods:

• Cash on delivery (payment upon receipt)
• Using cards Sberbank, VTB, Post Bank, Tinkoff
• Yandex money
• QIWI
• ROBOKASSA

Shipping throughout Russia. Delivery time is from 5 to 12 days.

Parcel by Russian Post 1st class

Available payment methods:

• Cash on delivery (payment upon receipt)
• Using cards Sberbank, VTB, Post Bank, Tinkoff
• Yandex money
• QIWI
• ROBOKASSA

Shipping throughout Russia. Delivery time is from 2 to 5 days. More expensive than regular delivery by Russian Post, approximately 50%. Parcel weight up to 2.5 kg

Express Parcel EMS

Available payment methods:

• Cash on delivery (payment upon receipt)
• Using cards Sberbank, VTB, Post Bank, Tinkoff
• Yandex money
• QIWI
• ROBOKASSA

Shipping throughout Russia. Delivery time is from 3 to 7 days. More expensive than regular delivery by Russian Post, approximately 100%.

Transport companies

Available payment methods:

• Using cards Sberbank, VTB, Post Bank, Tinkoff
• Yandex money
• QIWI
• ROBOKASSA

Delivery is possible to any locality where there is a representative office of the transport company. Delivery time is from 2 to 10 days. Sending large parcels is approximately 50% more profitable than by Russian Post.

Courier delivery in Togliatti

Available payment methods:

• Cash upon receipt
• Using cards Sberbank, VTB, Post Bank, Tinkoff
• Yandex money
• QIWI
• ROBOKASSA

Delivery time from 1 to 12 hours.

Pickup from our warehouse

Available payment methods:

• Cash upon receipt
• Credit, installments
• Using cards Sberbank, VTB, Post Bank, Tinkoff
• Yandex money
• QIWI
• ROBOKASSA

Pickup times must coincide with store opening hours.

Improvement of the standard rear shelf of the "nine"

The main drawback of the standard design: the shelf on the VAZ 2109 rattles while driving. This disadvantage is quite easy to eliminate with your own hands. There are three popular options for making a shelf silent.

1. Attach with Velcro.
2. Press with an elastic element.
3. Screw it on.

Velcro (Velcro tape) is a combination of two textile tapes, one of which is covered with micro-loops, and the second with micro-hooks. When connecting these surfaces, the hooks engage with the loops and securely fix the attached elements. Velcro comes in a variety of colors, starting with white. It is recommended to use a non-marking gray or black version in the car. The tape with loops is glued to the base, and the tape with hooks is glued to the underside of the shelf in contact with the base. By lightly pressing, the hooks engage with the loops, the VAZ 2109 shelf is fixed on the base and does not rattle when moving.

Some craftsmen use various elastic elements that press the rear shelf to the base and ensure silence when moving.

The option of screwing the rear shelf to the base with the sides ensures that this element is tightly pressed. But this is the most difficult option, requiring time and effort to use. It’s one thing if you need to press Velcro or put on an elastic loop. It’s another matter if, when fixing a part with screws, you must do the following simple operations:

• unscrew the wing of the left and then the right screw;
• align the holes in the shelf with the mounting screws;
• install the removable shelf with screws;
• twist the lambs, also one by one.

Fixing this element does not imply a force load on the connection - there is no point in securing it with screws.

Purchasing a finished part

Many owners of "nines" use the surface of the rear shelf to install additional media player speakers. In this case, you get a VAZ 2109 acoustic shelf. The easiest way is to purchase a ready-made acoustic shelf at a car store. There is a wide variety of options on sale to suit every taste and budget.

The rear shelf on the VAZ 2109 has an elongated shape along the rear seat with a folding part approximately 250 millimeters deep. This makes it very popular to use 6x9 inch (16x21 cm) coaxial speakers as rear-mount speakers. The mid- and high-frequency speakers of such systems are located on the same axis, one behind the other.

They provide a good filling of deep and rich sound throughout the car interior. But such an arrangement of audio systems, unfortunately, does not ensure that sound arrives from the front, in the listener’s face, as prescribed by feng shui requirements, or simply common sense. Rear row passengers listen to music in the very back of their heads, but it is loud.

Installing a purchased audio shelf can be done by yourself. This element is placed on the standard mounting points. To prevent rattling, Velcro is quite suitable.

It is better to connect the wires to the audio system through a standard connector block to facilitate the removal of the shelf when transporting oversized cargo.

Acoustic shelf for Lada Granta and its manufacture

Acoustic shelf for Lada Granta
Acoustic shelf for Lada Granta is designed to maximize the extraction of high-quality sound from the installed speakers, transform an ordinary trunk into an acoustic box, and also securely mount the rear speakers. The factory version has the right to life only for the undemanding average person. It does not meet the needs of an experienced music lover at all. There is only one way out in this situation - a complete replacement, during which the Grant acoustic shelf along with the standard speakers is placed at the back in the intended place!