What brake pads are best to put on a VAZ?

One of the most significant systems in a car is undoubtedly the braking system. One of the most important parts of this system are the brake pads. Drivers try to keep them in good condition to avoid accidents on the road. Such devices in VAZ cars are reliable but require frequent maintenance because the speed of the car and its stability on the road directly depend on their condition. So which pads are best to put on a vase?

Among the brake pads there are: ceramic, organic, metal, glued and semi-metallic, riveted.

Ceramic pads.

Ceramic brake pads can be called the best pads for VAZ. Their advantages include:

Quiet robot due to the low iron content that is included in their composition.
Very little friction on the brake discs is the main advantage of ceramic pads, due to which their service life is much longer than others.
This material almost does not emit black dust, which you constantly have to get rid of when it settles on the disks.
They have a wide temperature range from 0 to +700 degrees.

The only negative, which is most likely a note, is that ceramic sports pads can be harmful during everyday use due to strong heat.

Communities › VAZ: Repair and Modification › Forum › Which pads should I use?

Which company should I install front brake pads to prevent squeaking on a VAZ 2109?

This is not a weak lottery. I installed Ferodo Target on the factory wheels, they only squeak when the wheels are dirty. Silence after washing.

Ferodo clear pads) But the bitch is expensive))

and which ones? red or green? I read that the red ones wear down the disc more than they erase themselves)

Ferodo clear pads) But the bitch is expensive))

Have you heard any other names besides ferodo? =D

We heard, but this is one of the most affordable and high-quality pads)

The main thing is not to run into a fake... And if your wheels are good, then take red ones)

Yes, there are some ordinary ones there, not great ones)

We installed them on simple wheels for a friend (from the factory), and the chisel also overheated after a while and bent the wheels to hell)

how did it overheat?

Well, slow down at high speed))) and for a long time) then the wheels come in interesting shapes xDD

I used to drive red Ferodos. They didn’t creak or smear.

These will definitely not creak and braking will be much more productive.

It will be useful Cold engine start: consequences for internal combustion engines

Yeah, ATE whistles when the brake is low, it gets annoying in traffic jams...

Greetings! I have never noticed a “whistle” effect when using original ATE brake pads. Theoretically, I admit this possibility only in the case of extreme abrasion of dust and dirt of the outlet groove on the linings

Mutually. They cost the original, but sometimes they whistle, not like Ferodo, but they still exist. It only appears when you roll at low speed and slow down a little. Otherwise, good pads, although a little expensive.

During the last two revisions of the brake system, I installed a “sweet” couple: BREMBO MAX+ discs FERODO RACING pads. Braking is excellent. This is so...by the way! Good luck on the roads!

Well, the amphibian is strangling me to install a Brembo))) We ride on stock wheels and standards.

According to Ferodo, about 6 years ago there were excellent pads, but then they got worse. Maybe, of course, we have counterfeits in all stores, I won’t argue, but I don’t feel like checking either))) I ride ATE myself, if I erase them, I’ll buy them again, although maybe I’ll try TRW again.

Here, as they say: The owner is a master!))) I have a complete “minced meat”, so braking efficiency comes first. The inevitability forces us to say so. But for civilian use such “upgrades” are naturally inappropriate...

Agree. The stock one is 2110, but the Priorovsky vacuum cleaner is better than stock, it’s far from sports and not necessary for everyday use.

NIPPON, super braking!

yeah, and you squeak like in a UAZ and they scrape as if they’ve been erased, although it’s new, but that’s how it is for me, I’ve heard about a lot of similar symptoms, but it’s normal to slow down

Organic brake pads.

What brake pads are best to put on a VAZ?
Organic brakes replaced asbestos-laced brake pads in the 1970s due to health concerns. This type of pad includes only 10-30% metal, while the rest is resin and plant fibers adapted to withstand high temperatures.

The advantages of such pads:

They create good friction without preheating.
Compared to other types, they stand out for their lower price.

The disadvantages include rapid wear and dust, which can obliterate the disc holes.

Metal pads.

Up to 65% of this type of pads are made of metal.

Advantages:

Conducts heat well.
Withstands the harmful effects of high temperatures.
The coefficient of friction in such pads is higher than in others.
They have a long service life.

However, it should be noted that metal pads are more suitable for heavy vehicles. Also, their loud braking may be unpleasant for some drivers. High cost is also included in the list of their disadvantages.

Useful and interesting: Required list of documents to apply for a cash loan secured by a car

Semi-metallic.

What brake pads are best to put on a VAZ?
This type of product is made by mixing different types of metals (copper, steel, etc.). Cast iron, wire, graphite powder and copper, steel wool are also added to it.

Pros:

High-quality heat dissipation.

Semi-metallic brake pads, unfortunately, have much more disadvantages than advantages. These include their rapid wear, the noise they make during braking, and their poor performance in the winter.

The best brake pads for VAZ.

In the following list we will try to understand the question of which brake pads are better for a VAZ.

What brake pads are best to put on a VAZ?

DAFMI are pads that are not much more expensive than the original ones, but wear out much slower. It is recommended to use it for a measured and calm ride so as not to worsen the braking distance and last longer. The downside is the possible change in thickness due to strong heating, which can lead to destruction of the pad (price from 1500 to 6000 rubles).
TWR - known for their durability and good braking. It should be noted that this device copes well with high loads and elevated temperatures.
ROSDOT - pads from a domestic manufacturer that are wear-resistant, have good thermal conductivity, low noise and not high cost. They can also stand out due to the absence of harmful substances, which allows them to meet all safety standards.
Fredo, a well-known British brand among drivers, has perfectly adapted the cost of the product in accordance with current realities without loss of quality. They provide durability and effective braking, as well as excellent noise characteristics. A large selection of models ensures that you can choose products for any VAZ model.
ATE – despite the fact that the price of the products is above average, it fully justifies them. Silence in the robot, the use of the latest innovative materials, as well as the use of time-tested recipes, soft braking are not all the properties of the pads from this company. The only downside is that there are a lot of fakes, so the manufacturer recommends buying them only in official or large automobile stores.
Allied Nippon - car enthusiasts will agree that almost all products from the Japanese manufacturer are distinguished by their good quality. This company was no exception and has won international recognition. Most of their models are perfectly optimized for VAZ products. Their production technology is aimed precisely at increasing their wear resistance with an acceptable heat transfer rate.

What brake pads are best to put on a VAZ?

Useful and interesting: Useful and effective Liqui Moly additives that clean, protect and reduce consumption

Which VAZ brake pads are better to choose?

In 2021, there are a large number of companies on the market selling components and consumables for Lada cars. Depending on the car model and the store’s assortment, the choice of brake pads can reach 4-5 varieties. The main division is based on brands and production materials. The list of the best manufacturers includes:

EzATI;
VATI;
MARCON
ROSDOT
STS

These companies have held leading positions in the list of the most popular brands for several years in a row and guarantee high quality products.

Also, some motorists prefer original spare parts. AvtoVAZ brake pads differ from analogues in their moderate cost and optimal efficiency. At the same time, the manufacturer does not recommend the use of serial versions for aggressive use for other purposes. Such actions can overheat the linings, which will cause the brake fluid to boil and cause the module to fail.

Also interesting: Pros and cons of the Chevrolet Niva car suspension

Today there are a large number of companies on the market that sell linings for classic or modern VAZ cars. The following are the 10 best companies, according to consumer reviews and sales statistics.

How to choose brake pads for a VAZ

It is best to select brake pads for a VAZ according to the following criteria:

Brand popularity and reputation. You should carefully study the reviews and ratings of brake pads.
Price-quality ratio.
Popular among drivers.
When purchasing pads in a store, you should check them for defects, as well as for a certificate marked 90R/R90.
Their operating temperature.
Noisy or silent operation, because this criterion is no less important than the others.
Level of abrasiveness.
The presence of a sensor that displays wear.
And of course, due attention should be paid to the material and quality of the product.

Most often, you should not forget about the moment of counterfeits on the market. Today, this is a pressing problem in the market for both auto products and others. In order to buy high-quality brake pads for vases, you should follow a few tips:

The presence of foreign bodies on the lining is not allowed.
Remember and always pay attention to the numbers that determine the operating temperature - the higher it is, the better the braking will be.
A mandatory criterion is the presence of a certification mark, which was mentioned above in the article.
As an indicator of quality and customer care, original products always contain a passport, installation instructions, warranty card and, of course, a certificate.

Choosing good pads for a VAZ will not be difficult if you take into account everything listed above in the article and decide which functions are your priority. Also pay attention to the prices. For domestic manufacturers, they are often lower than for foreign brands; it all depends specifically on your budget.

Important parameters when choosing brake pads

When choosing brake pads for Kalina and other VAZ models, it is necessary to take into account that the problem of the existence of counterfeits currently remains relevant, which is largely facilitated by the imperfections of the current legislation. Therefore, it is recommended to make such purchases in branded stores that are not interested in supplying products of questionable quality. On the contrary, small retail outlets bear virtually no responsibility for low-quality products, attracting customers with low prices and many other marketing ploys.

So, what you need to pay attention to first:

for the presence of a certificate - the packaging of the pads must contain a mark of compliance of the proposed product with ECE criteria (marking - 90R/R90);
An external inspection of the friction layer can also provide an invaluable service: the presence of foreign substances on it should raise suspicions, although the presence of such minor defects as small chips, cracks, dents or bulges is acceptable;
pay attention to the metal base - it should be smooth, without visible bends, even microscopic peeling of the friction material should be absent;
pay attention to the operating temperature of the pads you purchase - the higher the value, the better the braking performance. For most VAZ models, this figure is in the range of 280 - 350 ° C. At the same time, it makes no sense to overpay for expensive products that can withstand temperatures of 800 ° C or more.

Marking

An experienced motorist can tell about the quality of the pads both from an external inspection and from the product labeling. Most car enthusiasts do not pay attention to the last factor, and completely in vain. Thus, one of the most important indicators of braking efficiency is the friction coefficient, denoted by two Latin letters that correspond to certain numerical indicators

The first symbol indicates the average coefficient of the pad when it is heated, the second – after complete cooling.

Table of friction coefficient values (the higher the value, the more effective the braking and the higher the wear of the pads):

C – less than 0.15;
D – CT is 0.15 – 0.25;
E – coefficient value lies in the range of 0.25 – 0.35;
F – friction coefficient is 0.35 – 0.45;
G – CT = 0.45 – 0.55;
H – friction coefficient indicator is 0.55 – 0.8.

Unfortunately, not all products present on the domestic market have this marking.

In addition to the friction coefficient, the marking may include the following information:

compliance with the EU certificate (we have already talked about it, it is indicated by the symbols 90R or R90, followed by the approval number);
catalog number HEXEN;
designation of the production batch;
WVA number, which determines the geometry of the pads.

Here you can find out the country in which the product was manufactured:

E1 corresponds to Germany;
E2 points to France;
E3 is Italy;
E11 indicates a UK manufacturer.