How to remove the tidy on a Grant sedan and liftback
Removing the torpedo with your own hands on cars of the specified versions before and after 2013 is simple. To do this, you only need a Phillips and flathead screwdriver.
The sequence of actions looks like this.
- Initially, you should turn off the power to the car and place it in a stable position.
- Remove the cover of the interior fuse box.
- Next, you will need to find the mounting screw and unscrew it. The fasteners for the instrument panel trim are also unscrewed.
- Now the decorative trim can be removed and the mounting of the tidy itself can be exposed.
- There are two screws at the bottom of the console that hold it in place. The screws need to be unscrewed and the tidy lifted.
- Next, you should reach under the panel and remove the wire terminal block from its back.
Removing the front panel of Granta Lux
Before removing the center console, you will need to arm yourself with a plastic spatula or a flat-head screwdriver wrapped in electrical tape. You will also need to find several clips in case the standard ones are broken during disassembly.
- Turn off the power to the car - all manipulations with the device are performed only after disconnecting the battery.
- Using a plastic spatula or screwdriver, remove the radio/radio plug.
- Pull the heater and air duct controls towards you. The procedure must be performed with extreme caution. There is a risk of damaging the regulator.
- Next you will need to remove the facing plastic of the beard by prying it off with a screwdriver. The design contains plastic latches that are easy to break. During reassembly, new ones are put in their place.
- At the end, you will need to lift the tidy and disconnect the contact groups of wires from the reverse side.
Adviсe
Antifreeze leaked into the cabin
To prevent problems with the heater core, you need to carefully monitor it. For example, from the first days of buying a car, periodically look under the car to see if there are dark spots there. And in the engine compartment it would be a good idea to observe the condition of the cooling system hoses. If you notice traces of antifreeze in any of these places, you need to immediately seek help, or carry out repairs yourself.
If possible, the hoses for connecting the heater radiator should be replaced with new ones, having coated the connection points with sealant. But some do not agree with this opinion. After all, sealant from the hose can get inside the cooling system and cause damage to the pump. As a result, the timing belt will break and the valves will meet the pistons.
The stove heating system on the Lada Granta car functions quite well, the owners have no complaints. The stove radiator is reliable and durable. However, there comes a time when the process of metal corrosion begins and the seams peel off. A faulty heating system can cause a lot of trouble, especially in sub-zero temperatures.
Frosting of windows and cold inside the cabin are the first symptoms of unstable operation of the heating system. Prevention is necessary.
Let's look at the step-by-step process of replacing the heater radiator on a Lada Granta car.
Granta FL
The modern version of Fl 2021 differs little structurally from its prototype. The car tidy is removed in the same way. Similar fasteners and identical clamps are used here.
How to remove a panel on a Grant to install a radio
In most configurations it comes with a plastic plug instead of a tape recorder.
Next, you will need to reach into the resulting groove and find a standard terminal there for connecting a sound reproduction device. It needs to be taken out.
After this, a short shaft is placed on the panel, intended for mounting a modern radio. At the end, the device is connected to the on-board network and inserted into the prepared shaft.
Soundproofing Lada Granta
Soundproofing Lada Granta
is a burning topic for many thousands, if not millions of our compatriots in Russian car clubs. No wonder, because this domestic car is in the top sales among available cars of this class and, of course, we all want it to be even more comfortable and cozy. This is exactly why hundreds of car owners visit us every month - we make your cars quieter. The car always comes to us by appointment and immediately goes to work with us without delay. An hour before arrival, we cut all the necessary material according to our patterns and have it heated in our special oven to a temperature of 50 degrees. Sound insulation of Grants, like any other car, is no different for us from a foreign car and we provide services only for maximum sound insulation without any compromises. The owner of the car is next to us all 8 hours in a cozy atmosphere and watches our work over a cup of coffee paired with free Wi-Fi
