How to remove the radiator grille of a Lada Granta (two methods)

Published: 06/17/2016

Rating:

Tags:Lada Granta

In any car, the radiator grille is one of those elements that catches your eye when you first look at the car. It is located on the front of the car and is therefore so noticeable. The “facial expression” of a car also very much depends on how the radiator grill looks.

It is for this reason that many car owners change it or perform tuning to give their car some individuality. The Lada Granta radiator grill is no exception. You can see many attempts to improve it in various ways.

Many owners complain that this model has virtually no protection for the radiator from dust and dirt entering from the outside. Proper tuning helps eliminate this problem.

Tuning the radiator grille of Lada Granta

How to remove the radiator grille of a Lada Granta without removing the bumper

» Miscellaneous » How to remove the radiator grille of a Lada Granta without removing the bumper

In any car, the radiator grille is one of those elements that catches your eye when you first look at the car. It is located on the front of the car and is therefore so noticeable. The “facial expression” of a car also very much depends on how the radiator grill looks.

It is for this reason that many car owners change it or perform tuning to give their car some individuality. The Lada Granta radiator grill is no exception. You can see many attempts to improve it in various ways.

Many owners complain that this model has virtually no protection for the radiator from dust and dirt entering from the outside. Proper tuning helps eliminate this problem.

Tuning the radiator grille of Lada Granta

How to remove the radiator grille of a Lada Granta

Before tuning this element, let's figure out how it can be removed from the car.

The Lada Granta radiator grill can be removed in 2 ways. According to the classical method, you need to proceed as follows:

• remove the front bumper;
• on its inner side, unscrew the nuts securing the grille, there are 9 of them;
• Click to open 2 locks under the headlights.

Removing the radiator grille along with the bumper on the Lada Granta

The second method makes it possible to do without dismantling the front bumper. The algorithm looks like this:

• Unscrew 6 bolts from the top of the grille;
• bend it, stick your hand in, find by touch 4 bolts at the top and 5 nuts at the bottom - for this you will need a figure eight wrench;
• Under the headlights, use a screwdriver to open the 2 clamps.

After dismantling, you can begin tuning. After this, installation is performed in reverse order.

Tuning using a utility net

Tuning the front part of a Lada Granta car using a Chain-link mesh is very common. Such a mesh can be bought at any hardware store - it can be metal or plastic.

We choose the option with medium-sized cells. This is important to avoid excess dust getting under the hood of the car.

Fine mesh netting for making radiator grilles

Next you need to follow a simple algorithm:

• using one of the methods described above to remove the radiator grille;
• cut off all horizontal and vertical jumpers, leaving only the outer frame;
• using cold welding, seal all the holes that were created after the jumpers were cut off;
• clean the surface from all irregularities and burrs;
• Cut the mesh to size and attach it to the frame. If the mesh is plastic, you can simply glue it. If it is made of metal, heat the frame so that it does not burst, and screw the mesh with self-tapping screws;
• paint and wait for it to dry. At this point the tuning can be considered complete.

Tuning the radiator grill using mesh on the Lada Granta

Installing a radiator grille on a Lada Granta car

After tuning is completed, the Lada Granta radiator grill is installed back. To do this, the finished part is placed in the standard opening in front of the radiator and secured with nuts, bolts and clamps. Next, you need to check how correctly the fit is made and inspect the front part of the machine for irregularities, burrs and protrusions. If any are found, clean them with a file or fine sandpaper.

Installing a bumper with a radiator grill for Lada Granta

Conclusion

Tuning the radiator grille is a good way to make the appearance of a car more attractive, make it stand out from the crowd, and add originality. This can significantly change the visual perception of your car when looking at it from the front.

The car will acquire a more modern, stylish and attractive exterior. It is precisely these considerations that drive those car owners who decide on tuning.

In the case of the Lada Granta car, the argument in favor of alterations of this type is the actual lack of protection of the engine compartment from particles of dirt, dust and moisture entering from the front. This is unlikely to benefit the car. Therefore, many car enthusiasts resort to making radiator protection with their own hands.

okuzove.ru

Replacing the radiator grille. — Lada Granta, 2012 on DRIVE2

I installed the grille as promised in the review and photo.

I had an analog grille, so installation took 15 minutes. Unscrew the 4 bolts at the top and the two nuts on the sides.

I installed the new grille in the same way. At the bottom of the grille there are 5 studs, the nuts on them are 5. I also took a photo of the studs. There is no need to solder them, since they are already in place and are not poorly made. The holes for the bolts are also drilled at the top.

I don’t know who had what didn’t fit, but for me everything fit perfectly. The pins fit exactly into the holes - I was pleased)))

Let me note that I physically cannot tighten all 5 lower nuts without removing the bumper. The hand doesn’t fit)) Only 2 on the sides, but in my opinion this is quite enough.

I also wanted to tell the guys who will remove the original grille without removing the bumper - this is a real hassle) Removing the bumper for the first time when installing the fog lights took 30 minutes. Don't be lazy, take pictures. It's actually easier to remove the grille; there are a lot of bolts.

The grille is painted well. Everything seems to be there)) Photo after washing)))

In the photo, the bottom of the grille is not screwed on, I dropped the nuts and didn’t look for it, but screwed it on later.

Issue price: 1,600 ₽

www.drive2.ru

Removing, installing, replacing the radiator grille trim of Lada Granta VAZ 2190

download photo to mobile phone

Operation, maintenance and repair manual for Lada Granta VAZ 2190

Section 11:

Car body Lada Granta VAZ 2190

Rice. 11.1. Fastening the radiator grille trim of the Lada Granta VAZ 2190: A - nut; B - plastic retainer useful tips for motorists When using site materials, an active link to car-exotic.com is required!

car-exotic.com

Removing and installing the radiator grille Grants

Tuning using a utility net

Tuning the front part of a Lada Granta car using a Chain-link mesh is very common. Such a mesh can be bought at any hardware store - it can be metal or plastic.

We choose the option with medium-sized cells. This is important to avoid excess dust getting under the hood of the car.

Next you need to follow a simple algorithm:

• using one of the methods described above to remove the radiator grille;
• cut off all horizontal and vertical jumpers, leaving only the outer frame;
• using cold welding, seal all the holes that were created after the jumpers were cut off;
• clean the surface from all irregularities and burrs;
• Cut the mesh to size and attach it to the frame. If the mesh is plastic, you can simply glue it. If it is made of metal, heat the frame so that it does not burst, and screw the mesh with self-tapping screws;
• paint and wait for it to dry. At this point the tuning can be considered complete.

Tuning the radiator grill using mesh on the Lada Granta

Granta radiator grille

Lada GRANTA was released as a budget car in 2011. The queue for it was huge, and this is understandable. For the people of our country, such a car is an excellent alternative to expensive foreign cars. But some shortcomings were made during development. One of them is the unprotected Granta radiator grille. For some reason, it does not have a mesh to protect it from dust, midges and flying pebbles when moving. Car enthusiasts have always found a way out of such situations. There are already several ways to improve both the protective properties and appearance of vehicles.

Content

Types of gratings

Tuning and protection

Proper grate removal

Production: we do it ourselves

Lada GRANTA was released as a budget car in 2011. The queue for it was huge, and this is understandable. For the people of our country, such a car is an excellent alternative to expensive foreign cars. But some shortcomings were made during development. One of them is the unprotected Granta radiator grille. For some reason, it does not have a mesh to protect it from dust, midges and flying pebbles when moving. Car enthusiasts have always found a way out of such situations. There are already several ways to improve both the protective properties and appearance of vehicles.

Types of gratings

Several types of front grille have been developed for this Lada model. For car owners, there are a variety of configurations with which you can change your car beyond recognition. Changing the appearance is nothing more than a stylish tuning that attracts attention and glances. A variety of fashionable “clothes” for your favorite car are presented in online stores and car markets. It’s not difficult to choose the option you like and install a new grille on the front.

There are several popular types that have proven themselves on the positive side, and with these grilles the car looks new.

The most popular option is “Hulk”. Three wide ribs create powerful, imposing front features. The car looks bigger and more massive. Adherents of the classics will also like the Phoenix - it does not violate the concept of the car and protects the radiator well. Owners of cars participating in racing tend to buy sports pads. A special hole prevents overheating.

The many options for radiator grilles for the “Gad Grant” provide a huge choice available to every car enthusiast. By purchasing such a body kit, you can install it by entrusting the car to the specialists at the service station. But for true connoisseurs, this process becomes creative, and installation yourself is a matter of honor. Moreover, every owner wants to spend an extra hour with his “iron horse”.

Radiator grille "Hulk"

Tuning and protection

It’s quite easy to create protection and a “new face” for vehicles with your own hands. It is not necessary to run to the store and buy a grille of a different configuration. To make a grant radiator grille and tune it, you don’t need any super-expensive and fashionable materials. A regular mesh with a fine mesh is perfect for this process. It can be either plastic or steel. It can be purchased at a regular hardware or hardware store. The price will be minimal, because not so much mesh will be needed. It is necessary to measure the distance that you plan to close and buy as much as you need.

In addition to the mesh itself, a certain tool is required:

• hacksaw for metal;
• file;
• needle file;
• sandpaper of different grain sizes;
• fastening screws or bolts;
• cold welding.

When all the tools and material are ready, you need to dismantle the factory body kit directly.

Flat file 16mm

Proper grate removal

How to remove the radiator grille on a grant? There are two options for this. The first is classic and requires no effort on the part of the car owner:

• remove the front bumper along with the grille;
• after that, unscrew 9 fasteners from the inside of the bumper;
• then unclip the grille latches.

The second option will allow you to remove the body kit without removing the bumper itself:

Removing the front grille on Grant

Production: we do it ourselves

After dismantling has been completed, you can proceed directly to manufacturing. The jumpers are cut off using a hacksaw. On the Lada Granta, the radiator grilles have a standard arrangement of fins, and only horizontal ones will have to be cut. You need to act carefully, otherwise any damage will lead to irreparable consequences. After removing the jumpers, the frame itself loses its rigidity, and all subsequent manipulations are carried out with extreme caution. The places where there were jumpers must be leveled using a needle file or file and sanded. The frame itself is sanded with fine sandpaper and prepared for further painting or filming.

The chain-link is measured according to the shape of the resulting frame, and fastened with self-tapping screws, which need to be heated before screwing. This will prevent the plastic from cracking. If the mesh was purchased from plastic, this simplifies the process. It is simply glued along the contour with a glue gun and that’s it. Some craftsmen advise securing them with clamps for reliability, but this is everyone’s business.

The main work has been completed, and now you can begin the final processing of the resulting product. The entire structure can be painted with the paint you like or covered with film to better protect the plastic.

The Lada Granta radiator grille is tuned not only for beauty, but also to protect against the adhesion of dirt, dust and midges. With such contamination, overheating can occur and the car will simply “boil.” Therefore, the size of the mesh cells is chosen at the discretion of the owner. There are ready-made and fitted radiator nets that can be purchased at car markets and stores. The actions that need to be carried out if you have a ready-made protective mesh are practically no different from the previous method.

Radiator grille "Riviera"

Installation method may vary. To do this, you need to make a frame to fit the radiator and attach the mesh to it in the standard way. Then the entire structure is attached directly to the air heat exchanger. This technique serves specifically as protection and does not require modification of the grilles. This also makes cleaning easier and does not bring problems with how to remove the radiator grille on the Grant.

With such a disadvantage in the Grant configuration, you need to think about replacing and installing a protective jumper right away. If you leave this point without attention, not only the radiator, but also the car’s stove may suffer. It also attracts small dust particles, which over time clog it and lead to breakdown. Installing a net is not only a new “face” of the car, but also insurance against unwanted breakdowns. And if an unforeseen situation occurs, the amount that will have to be paid for repairs will be much higher.

In any car, the radiator grille is one of those elements that catches your eye when you first look at the car. It is located on the front of the car and is therefore so noticeable. The “facial expression” of a car also very much depends on how the radiator grill looks.

How to remove Grant's radiator grille and tuning methods

When purchasing the newest model from the Volzhsky Automobile Plant, you can expect that you are getting a reliable, modern car at an appropriate price. The car is equipped with reliable parts, an original body and a full list of instruments necessary for comfortable everyday driving. Despite this, craftsmen do tuning, most often replacing optics, wheel rims and completely painting the car.

Tuning the Lada Granta car

The radiator grille is also often replaced. It is by this detail that many judge the character of the car and the capabilities of its owner. Another reason for the huge demand for new grilles is the ease of DIY installation. To do this, you do not need to have certain skills or buy expensive equipment. All you need is straight hands and standard tools that are found in every garage.

2 Making a grid from household mesh

Many new owners of Grants, who are just planning to tune the radiator grille, begin to visit specialized salons in the hope of finding an original part. It is worth saying that this method works great, but only if the buyer has an amount of 5–6 thousand rubles or more. And if you add the payment for installing the grille, then the owner of the new Lada model will have to “take it out and put it in” more than 8 thousand rubles.

To save money, you can create the element yourself. The main material for the manufacture of the radiator grille on the Lada will be a regular chain-link mesh with small cells. You can purchase this product at any hardware store in the country. On the shelves there are both plastic and steel products. In addition to the material for manufacturing, we will also need:

• file;
• needle file;
• hacksaw for working with metal;
• sandpaper or sanding paper;
• cold welding tool;
• fasteners.

Fine mesh netting for making radiator grilles

First you need to remove the standard Lada grille. To do this, we need an “8” key, a Phillips screwdriver and a TORX T20 key. You need to dismantle the part very carefully - it is quite possible that you will need it again. The work of removing the grating must be carried out according to a certain algorithm. First you need to lift the Granta's hood and remove the front bumper. There are 9 nuts under the bumper that need to be unscrewed. After this, you need to pull out the side clamps of the grille and then remove the part.

Upon completion of dismantling, you need to make a frame for tuning. To do this, you will need to cut off the vertical and horizontal jumpers of the bumper. Do not be alarmed if the coating in the front part of the Lada body becomes less rigid - this is a common effect of such tuning. The burrs that appear after removal must be sanded with sandpaper, and then cold welded all the holes obtained after cutting off the jumpers and stiffeners.

Removing the radiator grille Grants

The next step will be preparing the mesh. We will carry out this process according to the frame we received in the bumper. You can secure the Chainlink with clamps and screws. The latter should be heated so that the material of the Lada bumper does not crack during tuning. If you purchased a plastic mesh, you can simply glue it to the inner surface of the frame.

Then you need to decorate the new radiator grille. To do this, we use paint or a special film. If you give your preference to the first, then you need to work according to the same principle as when painting a car locally. Film is a more budget-friendly option, but will take a lot of time.

Many new owners of Grants, who are just planning to tune the radiator grille, begin to visit specialized salons in the hope of finding an original part. It is worth saying that this method works great, but only if the buyer has an amount of 5-6 thousand rubles or more. And if you add the payment for installing the grille, then the owner of the new Lada model will have to “take it out and put it in” more than 8 thousand rubles.

3 Installation of the radiator grille

After processing, the radiator grille is installed on the Grant. To do this, take the finished part and insert it into the opening in front of the radiator. Next, we fix the product with fasteners and check the front part of the body for any irregularities. If there are any, the Lada bumper can be carefully cleaned with a file or fine-grained sandpaper.

Installation and fixation of the finished part on the car

After we have done the Grant tuning, you can take care of the external protection of the car’s radiator. Unfortunately, the manufacturer did not provide this element as standard. As practice shows, this is in vain, because the grille alone is not enough to protect the engine compartment of the Lada from dust and small insects. They severely clog the engine and throttle pipes, which quickly damages the parts.

Additional grille for the radiator

If you don’t want to bother with removing the standard grille of your car, then you can always use radiator protection from Hyundai Grant Starex as a replacement for the standard part. The part fully matches the dimensions of a domestic car, but protects the engine and other parts of the car much more reliably.

By tuning the radiator grille and installing external protection on the Grant, every owner of this car can sleep peacefully. Now no insects, dust and small debris are scary.

Source: https://AutoJiza.ru/reshetka-radiatora-granta-snyat-sposoby-tyuninga/

Articles of the radiator grille pre-restyling and restyling

If you need to replace the radiator grille with an original one, please note that they come in two types: restyled from 2007, and pre-restyling from 2004.

• Radiator grille Opel 13 20 358 / GM 13241967 from 2004 onwards dorestayl without profile
• Chrome profile for dorestayl grille Opel 14 00 746 / GM 13142522
• Radiator grille emblem Opel Opel 13 24 033 / GM 13142521

This type of grille is suitable for ASTRA H 5dv/Kombi 03/2004-2007

Above are the article numbers of the radiator grille elements individually, however, you can order the entire grille, but it will cost more.

• Radiator grille with restyled profile from 2007. Opel 13 20 370
• Radiator grille profile chrome Opel 13 22 242
• Radiator grille profile Restyle side chrome Opel 13 22 245

The above items are intended for Astra H restyling after 2007 for hatch 5d, sedan.

Grille for ASTRA-H 3D/GTC

• Radiator grille without profile Opel 13 20 359 / GM 13241968
• Radiator grille without profile Opel 13 20 364 / GM 13247083 grille type
• Grille profile chrome Opel 14 00 773 / GM 1315798
• Opel emblem original Opel 13 24 033 / GM 13142521
• Primed insert (“saber”) for Opel badge 1400326 GM 13183704

It is worth noting that the installation of the grille from the GTC version on the regular version of the model differs slightly in the number of fasteners, but with a little adjustment it fits like the original one.

Modification of the radiator grille on the Lada Grant

A beautiful body, which AvtoVAZ designers worked on, a modern radiator grill - Granta is good for everyone. But there is no limit to perfection, therefore, even though the car came off the assembly line relatively recently, tuning enthusiasts are already changing the appearance and internal components of the car to their taste. Moreover, the scope for creativity is enormous. Based on the reviews of the owners, it can be understood that the defects of the Lada Granta are present in the car from the factory, and a lot can still be altered and improved.

Tuning Lada Granta

External tuning or styling is distinguished. This is nothing more than changing the appearance of the car. So, you can change your car almost beyond recognition. Moreover, now everything for this is available and it can all be easily purchased in online stores or tuning centers. Nowadays they even produce entire sets of body kits that allow you to change the car body in certain styles. Such body kits are also offered for the Lada Granta.

But it’s probably not interesting to simply install a body kit bought in a store. Some people like to do everything with their own hands. After all, tuning is a creative process.

Everyone can agree that the most impressive elements of the body, by which it immediately becomes clear what kind of car is in front of us and what its character is, are wheels, headlights and other optics, as well as the radiator grille. Such a seemingly insignificant body detail, like a grille, provides very wide opportunities for tuning. In addition, you can replace the grille with a tuned one without much difficulty. You can also make this part yourself. You don't need any special skills for this. All the tools for this operation are quite standard, and the materials are consumables.

How to remove the radiator grille of a Lada Granta (two methods) - RepontoMore

Anyone who has at least once seen the latest car model from the VAZ concern will say that a new radiator grille for the Grant is an extremely necessary thing.

Don’t worry, the item fully complies with all standards and has a modern appearance.

However, unlike the grilles on previous Lada models, it tends to let in a large amount of dust, which severely clogs the radiator and engine of the car.

1 Improvement of Lada Granta

When purchasing the newest model from the Volzhsky Automobile Plant, you can expect that you are getting a reliable, modern car at an appropriate price.

The car is equipped with reliable parts, an original body and a full list of instruments necessary for comfortable everyday driving.

Despite this, craftsmen do tuning, most often replacing optics, wheel rims and completely painting the car.

Tuning a Lada Granta car We recommend reading:

The radiator grille is also often replaced. It is by this detail that many judge the character of the car and the capabilities of its owner.

Another reason for the huge demand for new grilles is the ease of DIY installation. To do this, you do not need to have certain skills or buy expensive equipment.

All you need is straight hands and standard tools that are found in every garage.

Radiator grille for Grant: do-it-yourself tuning

The Lada Granta is attractive in every way, because in addition to its economical price and great demand, it looks more than decent in appearance. The designers did a good job not only on the body, but also on its additional elements, in particular I would like to highlight the modern Grant radiator grille.

However, it doesn’t stop there, because tuning fans are increasingly resorting to modernizing the interior of the car and its exterior to their own taste. Moreover, the potential for creativity is inexhaustible.

Based on the reviews of the owners, we can conclude that the Lada Granta contains defects that can be redone and corrected.

Lada Granta, relevance of tuning

Styling or the more popular word tuning can be heard more and more often from the mouths of car enthusiasts. This is the name given to the process or result of modernizing the appearance of a car.

It is possible to change your car almost beyond recognition. In addition, now this can be done much easier than before, because there are more and more tuning centers and specialized online stores. There are even ready-made body kits available that allow you to change the car body to suit a certain style. Lada Granta was no exception.

However, for sure, installing a ready-made body kit purchased in a store is not as interesting as doing it yourself. After all, tuning is a creative process.

Many will agree that the most spectacular external components of the body, by which it becomes clear what kind of car is in front of us, are headlights, wheels, all kinds of optics and a radiator grille.

In the Lada Granta, at first glance, the grille is not such a significant body detail, but it provides many opportunities for tuning. In addition, in the Lada Granta, tuning the radiator grille can be done without much difficulty. In addition, this spare part can be made manually.

It is not necessary to have special skills for this. To perform this operation we will need standard tools and consumables.

Removing the grille separately from the bumper

The difficulty is that the grille will have to be folded back. And this risks breaking the “plastic horns”. If you're willing to take the risk, read on.

We will need a flexible Torx screwdriver with a T20 tip. Using a Torx T30 wrench, unscrew the four screws on top. Everything is simple here, but the grille will need to be bent forward.

Operation not according to regulations

Use a flexible screwdriver to get to the screws on the side. They are fixed at the same level with the central point of the emblem.

When the screws are unscrewed, try to remove the grille from the grooves (see figure). Each “horn” ends in a groove in which the lattice protrusion is placed.

Plastic fasteners

If you have dealt with the side fastenings, then with the “central spur” everything will work out quickly. It is necessary to move the plastic protrusion upward, then tilt the grille forward. The fastener should snap off immediately.

The bumper and grille are “sewn” together with plastic tabs. They go in one row, 5 on each side. And you can remove the Renault Duster radiator grille, and not break it, only by snapping off all 10 tabs.