Grant stove radiator

The location of the heater radiator on the Grant is not convenient for replacing it. To remove the radiator without damaging it, you will have to dismantle the dashboard, which can take a lot of time and labor due to a trivial problem that can be solved in an hour in other cars.

The radiator is located under the dashboard in its central part at the driver’s feet. Its pipes are hidden behind the decorative side panel trim. This location of the radiator makes it a little difficult to access it when replacing it, but if you use the correct replacement instructions, then removing and installing the radiator yourself will not be difficult.

Heater radiator: responsible for heating the interior

It’s hard to imagine a modern car without a standard set of devices and options, thanks to which driving the vehicle becomes as convenient as possible, and staying in the cabin is comfortable and safe. The functions of maintaining a favorable temperature regime in the car are assigned to the heating, air conditioning and ventilation system, which, depending on the situation, can heat, ventilate or cool the air in the cabin. At the same time, one of the key components of the heating system is the stove, which includes a radiator that acts as a heat exchanger. The air entering the car interior is heated by the radiator, and it is heated by the liquid that cools the engine.

"Lada Granta" is equipped with a large number of options, thanks to which driving the vehicle becomes quite convenient

How does the Lada Granta heating system work?

Structurally, the Lada Granta heating system consists of:

• an air duct directing the flow to the left deflector (deflector is a device for enhancing traction);
• heat exchanger covers;
• seal;
• stove radiator;
• air duct to glass;
• stove body;
• central air duct;
• an air duct directing the flow to the right deflector;
• recirculation shutter rods;
• fan shell;
• directly from the fan;
• a resistor that regulates the operation of the fan;
• main air duct;
• distribution valve rods;
• regulating device;
• a device that directs air to the feet of passengers;
• thermostat shutter rods.

The structure of the Lada Granta heating system allows you to carry out repairs on your own

How does the heating system work?

The heating and ventilation system in Lada Granta is a supply and exhaust system . What does this mean? Air from outside penetrates into the cabin through a special device in the form of an air intake box placed in front of the windshield. The amount of air coming from outside is regulated by a special recirculation damper. The recirculation system provided in the Lada Grant allows for better heating of the air in the cabin in winter and faster cooling in summer (if air conditioning is available). However, you should not abuse the recirculation mode, since this will introduce stale air into the car. It is convenient to use recirculation to protect against foreign odors from the street entering the cabin, but only for a short time. The principle of recirculation is to block the access of air from outside and repeatedly pass internal air flows through the heating or cooling element.

Next, an air filter 7 appears on the path of air flows, which serves as a barrier for dust and dirt particles. Do not forget to change the filter element in accordance with the schedule recommended by the manufacturer. The air, cleared of mechanical particles, is picked up by fan 11, driven by engine 12, and pumped into the car interior.

This is interesting: Crossover of the future

After this, the air stream passes through the air conditioner evaporator 13 (if provided in the package), under which there is a drainage hole 14 for draining the condensate. Depending on the position of the damper 15, which regulates the temperature, the air moves to the heater radiator or bypasses the heat exchanger. If the damper directs the jet to the radiator, then heated air enters the cabin, the flows of which can be distributed as necessary onto the windshield and side windows or under the feet of passengers.

Heating and ventilation system "Lada Grants" - supply and exhaust

The exhaust occurs through special openings in the rear of the body, which can be found under the trunk lining. For normal operation of the hood, these openings should not be blocked by cargo carried in the trunk. Among other things, a closed hood can cause windows to fog up.

Operation of the Lada Granta stove radiator

There is a heater directly under the windshield; after passing through it, air flows are directed to different parts of the cabin. Judging by the reviews of the owners, the stove installed on the Lada Granta works more efficiently than the heaters of other VAZ models, for example, Lada Kalina .

The radiator leaked, the sealant was filled in - the leak stopped, and the stove also stopped heating. The service center said that I shouldn’t have done this: the stove radiator was clogged. Replacing a stove costs approximately 4–5 thousand rubles. + oven. Refused, no money. A friend advised me to change the expansion tank cap. And so they did. Cool, the oven works great!

Nikolai

https://avto-granta.ru/remont-i-obsluzhivanie-lady-granty/pechka-na-lada-granta

The heater of the Lada Granta car has a plastic housing

How to identify a clogged radiator

Checking the radiator is a fairly simple task that anyone can do. To do this, you need to check the circulation of fluid through the radiator. If the circulation is normal, then both radiator tubes will be hot, but if the inlet tube is hot and the outlet tube is cold, this indicates that the radiator is clogged from the inside.

A clogged radiator can be washed or, at best, replaced with a new one.

Types of Grant stove radiators

There are two types of radiators: with soldered pipes (factory radiator) and with removable ones.

Factory radiator with permanent pipes

The manufacturer produces radiators with non-removable pipes, that is, in order to dismantle it without removing the entire panel of the car, it is necessary to saw off the pipes coming from the radiator.

Radiator from Datsun with removable pipes

It is best to purchase a heater core from Datsun On-Do. The dimensions of the Datsun radiator are no different from the Grant one, with the exception of removable pipes, which will greatly reduce the pain during installation.

Step-by-step replacement process

It is necessary to remove the battery, the air filter box by pulling it out from the rubber dampers and remove the intake corrugation. You will need this to access the thermostat.

We drain the antifreeze from the cooling radiator by unscrewing the plug in the lower right part of the radiator. To drain, you will need a container of at least 10 liters.

Attention: It is necessary to drain the coolant when the engine is cold to avoid burns.

Remove the connector from the electronic accelerator pedal and unscrew the pedal from the car body using a 10mm socket wrench. Then remove the pedal from the studs.

Unscrew the screws securing the radiator cap with a 6 mm wrench and remove it.

We remove the radiator pipes and lower them down so that the remaining antifreeze drains.

Now you need to press down the brake pedal; to do this, remove the cotter pin that secures the pedal and press on it when we remove the radiator.

If the radiator is not dismountable, that is, the pipes are not removable, they must be sawed off with a hacksaw. If the pipes are removed, they must be removed and pulled out of the holes in the engine shield.

After removing the pipes, you can pull out the radiator by pressing the brake pedal down.

We install the new radiator in the same way, pressing down the brake pedal, first removing the pipes from the radiator and installing them after the radiator is placed in its seat.

If the radiator is not prefabricated, then the pipes can be sawed off and the connection can be made on the hoses.

Replacing the Lada Granta heater radiator

If it's cold in the cabin when the heater is on, it means it's time to repair or replace the heater. Among the most typical reasons why you have to change the heater radiator on a Grant:

• clogging of channels due to the formation of scale or dirt;
• the occurrence of cracks or holes in the heating system.

In some cases, it is possible to get by with repair and restoration measures. For example, before changing the radiator, you can try flushing the system with a special liquid. There are means to get rid of scale inside the heating system, both by draining the antifreeze and the coolant inside. Such products, as a rule, do not harm sealants, gaskets, hoses, etc.

In some cases, it is possible to repair the heater radiator of a Lada Granta car without having to replace it

What is needed to replace a stove radiator?

When starting to replace the radiator, you need to prepare:

• set of clamps;
• sealant;
• antifreeze;
• Phillips screwdriver;
• key to 10;
• insulation (foam rubber);
• file.

Of course, you should purchase a new radiator in advance, and a “original” one, since the heat exchanger of other models will not work.

Video: recommendations for replacing the Lada Granta heater radiator yourself

Sequence of steps when replacing a radiator

Work on dismantling the old radiator can begin from the engine compartment. Here, to create access to the elements of the heating system, it is necessary to remove the battery, the air duct pipe between the throttle assembly and the air filter, as well as the air filter itself.

Then you need to empty the system of coolant by draining it into a previously prepared container. Obviously, if a car owner intends to fill in new antifreeze at the end of the work, the old one does not need to be saved.

This is interesting: Light signals between drivers

Before replacing the heater radiator of a Lada Granta car, you must remove the battery and air filter

The next stage of work is carried out from the interior. To gain access to the heater radiator, you will first have to remove the gas pedal: without this, it is not possible to remove the heat exchanger . Dismantling the pedal, as a rule, does not cause any difficulties: using a 10mm wrench, unscrew the three fastening nuts and disconnect the brake light limit switch and the connector for the electronic gas pedal. In addition, you need to press the brake pedal and lock it in this position.

Next, the plastic cover covering the radiator is removed, after which access to the heat exchanger opens. After this comes the most crucial moment - sawing off the radiator pipes: you should saw off after bending so that the cut part can be removed through the hole into the engine compartment. After both pipes are removed, you can remove the radiator from the niche into the car interior.

To dismantle the old radiator, you need to saw off its pipes

The pipes on the new radiator should also be sawed off so that later hoses can be put on them and secured with clamps. The cut edges of the pipes should be processed with a file, the holes in the engine compartment are filled with foam rubber to provide additional fixation to the structure and to preserve heat in the cabin.

Before disassembling the entire panel on the Grant, you need to file down the aluminum tubes on the stove radiator and connect the new radiator with a piece of hose... Doing this is not a problem, but before doing anything, you need to think about how to do it correctly.

Akhmed Fazilov

https://grantaremont.ru/content/pechka

It is more convenient to carry out the work of replacing the heater radiator together: one supplies the pipes from under the hood, the second receives them in the cabin. Sealant should be applied to the pipes of the new radiator and, after connecting to the flexible hose, securely secured with clamps. After this, you need to assemble all the removed parts: gas pedal, battery, air filter, then fill the system with antifreeze. At the end, you should check how the new radiator works: you need to start the engine and let it run for a few minutes, then visually make sure that the antifreeze level has not dropped, there are no leaks, and the heat exchanger has warmed up.

There are no fundamental differences in the procedure for replacing the heater radiator on a Lada Granta with and without air conditioning (unlike replacing the cooling radiator).

Video: personal experience of the Lada Granta owner in replacing the heater radiator

Stable and uninterrupted operation of all vehicle systems can be achieved by constant monitoring of their condition. The serviceability of the Lada Granta heater radiator becomes especially important in winter, therefore, in the process of preparing the car for the cold season, it would be useful to check its readiness for the season, especially if the vehicle is expected to operate at a high intensity in winter conditions. Practice shows that with proper operation, a stove radiator can serve properly for many years, but if it still fails, it is quite possible to replace the heat exchanger yourself.

Two higher educations. The main activity is freelance copywriting. I write on various topics that interest me, I try to put my own knowledge and experience into the texts. (1 vote, average: 5 out of 5)