Installing a radio on the Lada Priora

How to Install a Radio on Priora 2

set the radio
in Zhiguli
priority

Introduction

Lada Prior . The location of the famous "tens" has been improved. Modern design and new configuration details have made this economical Russian car quite popular among car owners. But, despite this, every Priora owner strives to modify his car to his own taste, to make it more comfortable and elegant. How to install fog lights on a Lada Grant. Often lovers of clean and high-quality acoustics change their standard audio player to a more modern version. Installing a radio on Lada Priora has some features that can be found in this article.

Modern car players are quite functional and varied not only in external design, but also in configuration, installation and connection methods. I changed 1 din to stock radio 2, stock 2 din radio works as usual. When choosing a car player, priority should be taken into account all the features of its size, the ability to connect connectors and the quality of parts.

Features of the Lada Prior radio installation

As a rule, the radio installation has priority

includes several types of audio players:

Media player 2 DIN for LADA Priora

These designations indicate the dimensions of the mounting hole for the radio, which correspond to the dimensions 180x50x160 mm on 1 DIN and 180x100x160 mm on 2 DIN. Optional install

A more modern version of the 2 DIN radio, the motorist will have to perform the function of sawing through the partitions of the car's front console to widen the opening for the player. In some cases, adjusting the size may require cutting or purchasing a suitable adapter frame for the console, which is much more difficult than installing a 1 DIN.

However, if you decide to install a standard 2 DIN system, it is best to trust the installation to an experienced specialist, otherwise there is a risk of damaging both the console itself and the interior of the car.

It should also be noted that 2 DIN tape recorders have a wide range of functions:

• long service life thanks to impact-resistant housing;
• paired amplifiers increase signal reception a couple of times;
• the ability to switch the frequency of the radio signal by all car passengers through the Music Zone system;
• built-in radio navigation function;
• built-in USB connector allows you to connect external devices to view and play files;
• the presence of a bass amplifier for music for high-quality sound.

Built-in USB port and amplifier outputs

Do-it-yourself radio installation in Lada Prior

In the first case, we are considering the installation of a DIN 1 audio player, which does not provide configuration for the shape and characteristics of the plastic base of the console. Before installation, turn off the vehicle by pulling out the negative terminal of the battery.

The installation process of a standard audio player is divided into several stages in the following order:

Diary Lada Prior 2. Entry 16. Remove the center console (beard)

Subscribe to All About the Last Day.

Setting the radio to Priority 2 and setting the front 16 channels

Installation

one-way
radio
in
up to 2
and

16 front speaker settings

1. 1. Preparing the hole for installation. To do this, remove the plastic cover that covers the niche provided by the manufacturer for installing the audio player;
2. 2. Determination of connectors for connection. How to install fog lights on a grant | The hole has several connectors for installing an audio player: for connecting gray power and for coffee-colored speakers;
3. 3. Connect the player to the automatic connectors. When matching the audio player and device connectors according to ISO, you must connect via a circuit diagram or via an adapter;
4. 4. Install the radio in the normal hole. Remove the magnetic frame and install the body in the usual opening of the car console. Install the radio on the Lada Priora. If you want to install more on your computer. As. Clicking correctly will produce a small click;
5. 5. Activate the player by pressing the reset button.

Installation of a DIN 2 audio player takes longer due to the formation of the appropriate hole size on the Priora console. The installation process is similar to the 1 DIN mounting system, the connection is made according to the same principle.

Standard firmware Lada radio priority

Modern technologies are rapidly developing, and automotive devices are also improving. how to install a rear view camera on a Granta; I bought the camera on Ebay. The standard firmware of the Lada radio Priora allows car owners to complement the player's capabilities by adding additional functions that they do not have in the standard software. The updated radio interface can be complemented by a convenient touch keyboard, fresh software and new versions of the player, with the ability to play all audio and video formats.

The VAZ 2170 audio player is equipped with an SD card with a capacity of at least 4 GB, formatted in FAT.

Firmware for Lada radio 2170 is quite simple:

1. 1. You need to find a suitable program online and save it on your PC. As a rule, motorists share such programs on thematic forums;
2. 2. Save the downloaded files to a memory card;
3. 3. Installing a radio in Priora restyling I don’t know how to install it. How to install a rear view camera on a Grant | Insert the SD card with the required information into the provided radio;
4. 4. Reboot the player by clicking the “Reset” button, after which the update program will automatically start. Thus, the firmware is coming to an end, as evidenced by the scale on the radio monitor;
5. 5. After the firmware is completed, remove the memory card and restart the player, then use the updated interface.

Standard connection diagram

Three main wires are responsible for powering the device. Manufacturers mark them with colors and markings. It is necessary to clarify the purpose of each wire in the connection manual, since even the same manufacturer may have different markings on different products. The standard is considered to be:

• +12V (yellow) – wire of the main power supply of the radio . Serves primarily for the main amplifier and stores device settings. It is advisable that its length be less than 30 cm in order to connect through a fuse to the battery. Voltage must be supplied to it constantly.
• ACC (red) – is responsible for turning on the car radio by turning the ignition switch . The main task is to prevent rapid battery discharge. The ACC designation is used for accessories, since it is switched after turning the key and ensures the operation of the heater and radio.
• GND (black) – negative wire , which, ideally, is connected to the negative terminal of the battery. In many cases, the wire contact is stripped and connected directly to the car body.
• ANT (white) – antenna control wire.
• ILL – radio backlight, connects to the headlights.
• The remaining wires are used to connect speakers or specific functions.

Connection diagram

The factory connection diagram does not provide for the supply of positive power through the contact plates of the ignition switch (red cable). To ensure correct operation of the device, it is necessary to remove an additional cable from the circuit, which is energized only when the ignition is turned on. The line must be protected by a fuse rated at least 15 A (for example, a cigarette lighter circuit).

An additional signal, ensuring the safety of the settings when the car is stationary, is supplied using a wire with a yellow insulator. The cable is routed to a circuit connected to the positive terminal of the battery. There is also a ground connection in the power circuit. The power and speaker cables are routed into the instrument panel; to connect the head unit, you will need an ISO standard adapter.

Installation on the first generation Priora

To install the car radio in its original location, you need:

1. Disconnect the battery from the vehicle's on-board network.
2. Remove the 1DIN decorative frame with a box for small items from the center console of the instrument panel. The assembly is held in place by plastic latches located in pairs at the top and bottom of the drawer. Removal is carried out by pulling the part towards you; it is possible to bend the edges with a plastic mounting spatula.
3. The rear has mounting points for the factory patch harness equipped with ISO connectors. It is necessary to disconnect the plugs from the box, which is then set aside.
4. Connect the pads to the radio and check the operation of the device. Priora cars are supplied from the factory with a constant supply of positive power, independent of the position of the key in the ignition switch. It is necessary to change the wire connection, following the operating instructions for the head unit. The positive signal sent when the ignition is turned on is taken from the rear window heating button.
5. Lay the wire leading to the external antenna. The cable runs under the plastic trim of the A-pillars and the roof panel. To reduce the likelihood of noise, the wire is wrapped in fabric insulating tape or foam rubber.
6. Reinstall the removed trim elements.
7. Connect the antenna power from the ISO connector and check the functionality of the acoustic device in radio receiver mode.
8. Place the standard mounting shaft into the hole in the center console. The part is attached using tabs that are pressed out with a screwdriver. During installation, it is necessary to ensure maximum fit density, which will reduce vibrations of the radio when moving.
9. Connect the power, speaker and antenna plugs to the connectors on the back of the head unit. Place the radio in the guide shaft until the locking latches engage. Check the tightness of the installation, and then place the decorative frame in place.

To install a 2 DIN radio you will need:

1. Remove the front trim of the instrument panel along with the central air ducts.
2. Cut the connecting jumper between the standard socket for the radio and the plug. Expand the rectangular hole to the dimensions specified in the technical documentation for the head unit.
3. Using a saw, modify the plastic frame inside the instrument panel.
4. Place metal guide slides in the resulting window on the front trim and secure them by bending the triangular fasteners.
5. Reinstall the removed parts, and then connect the new head unit and insert it into the guide shaft.
6. Check the functionality of the equipment, configure the radio receiver and loudspeakers.
7. Install a decorative frame located around the perimeter of the front panel of the radio.

Audio, video and photo

The radio supports audio formats: MP3, WMA and WAV. While a tune is playing, the display shows information about the album, artist, and cover art (if any). You can adjust the shades of sound using the equalizer (there are 6 pre-programmed settings for Jazz, Rock, Voice, etc.). The sound quality is not bad, quite clear, without audible cuts in the highs or lows.

MMS supports only one video format: WMV with a resolution of 320*240px. To play video files you will have to use a converter, for example, Xilisoft Video Converter Ultimate. It will not be possible to play a video without conversion, for example, in 720p resolution, the picture will slow down, and the sound will lag behind the video, due to the insufficiently powerful processor.

Review of MMC Lada Granta (luxury) and Lada Kalina 2 (standard)

Review of MMC Lada Kalina 2 (luxury) and Lada Priora (luxury)

The radio is capable of opening photos, supported formats: JPEG, .JPG, .JPE, .BMP, GIF, .PNG. For example, a photo with a resolution of 1400x800px and a size of 1MB will open in about 1 second, and a photo of 1978x3456px and a size of 7MB will take as much as 9 seconds.

It is worth noting that after purchasing a car, the antenna comes as a gift. You will have to install it yourself.

Why bluetooth doesn't work

Most often, failure occurs due to the fault of Sony smartphones. We have already looked at how to connect bluetooth to the Lada Vesta, so it’s worth trying the pairing again.

Connection may not be possible when the Bluetooth function in Vesta is not activated in the radio. Press the button to accept the call, the system begins to function. If this does not resolve the problem, it is best to contact your dealer. Also, this problem may appear after trying to connect several phones. There may be other reasons why Bluetooth does not work on Vesta, including a factory defect.

Firmware for Lada Priora radio

Modern technologies are rapidly moving forward, also improving car gadgets. Firmware for the standard Lada Priora radio allows car enthusiasts to expand the capabilities of the player by adding additional functions that the standard software does not have. The updated radio interface can be supplemented with a convenient touch keyboard, fresh programs and new versions of players with the ability to play all audio and video formats.

Radio set from Priora 2

The firmware of the VAZ 2170 audio player system is carried out using an SD card with a capacity of at least 4 GB, formatted in the FAT system.

Firmware for the Lada 2170 radio is quite simple:

1. 1. You need to find a suitable program on the Internet and save it to your PC. As a rule, such programs are shared by car enthusiasts on thematic forums;
2. 2. Write downloaded files to a memory card;
3. 3. Insert the SD card with the necessary information into the provided slot on the radio;
4. 4. Restart the player by pressing the “Reset” button, after which the update program will automatically start. Thus, the firmware goes through to completion, as evidenced by the scale on the radio monitor;
5. 5. When the firmware is completed, you should remove the memory card and reboot the player, after which you can use the updated interface.

Connection diagram using ignition switch

The standard instructions outline the connection method using the ignition switch. By default, this method is considered the safest and one of the most economical. The radio will turn on only after turning the key in the ignition, thus not discharging the battery.

To implement it, you need to connect the +12V wire directly to the positive terminal, and connect the second positive wire, which regulates the device’s activation, to the ignition switch. GND must be connected to car ground.

After such an installation, it is possible to use the radio only with the electronics turned on or the engine running, which some motorists consider a disadvantage. However, when parked for a long time, you can be sure that the battery charge will be maintained.

Connecting a 2 DIN radio to a standard place in the car

How to connect a 2 DIN radio with aliexpress in a car

DIN stands for "Deutsche Industriele Norme" - or "German Industrial Standards". The standard dimensions of a radio tape recorder installed in the car's standard socket. These standards are used by all manufacturers of cars and car radios (or almost all), at least all Chinese radios supplied to us from aliexpress, all of them are assembled according to 1 DIN standards, and more often - 2 DIN. By the way, 1 DIN is the size of the radio, the width x height of which is 180x50mm. 2 DIN - 180x100mm, with the installation depth of all DINs being 160mm. There is also a very rarely used standard for radio dimensions 1.5 DIN - 180x75mm. But finding such a radio is very rare, so today we will consider the usual size of a multimedia player - 2 DIN.

So, in order for us to connect such a radio, if we previously had a 1 DIN radio in the car, we will have to remove the old radio and install the ears on which the radio is attached under the dashboard from the new radio (these are most often included with the radio, but always please specify). In addition to the ears, we will also need a frame sized 2 DIN, which will no longer be included with the radio. It must be purchased separately for each vehicle. It is very advisable to treat the places of fastening and contact of the plastic of such a frame with an anti-creaking composition, otherwise not very pleasant squeaks will be produced in the cabin; they will not appear immediately, but over time.

So, with the installation of the radio, everything is more or less clear (for those who are not very clear, watch the video of installing the 2 din radio below). Now we need to look at the connection diagrams for the 2 din radio, and also figure out its pinout.

Connection diagrams for 2 DIN radio

Most Chinese 2 din radios from Aliexpress are connected to the car via an ISO - Euro connector. This is the most universal connector and the easiest to connect to almost any car. And the pinout is quite logical and simple.

Pinout of ISO - Euro connector of Chinese 2 din radio from aliexpress (example - Podofo - 7018B). Similar radios with an ISO connector will have the same pinout.

Designation of wires of a Chinese 2 din radio

But there are other connectors often used on Chinese radios. I suggest you familiarize yourself with their pinout and subsequent connection

Pinout of 2 din radio from China

The meaning of the 2 din connectors of the radio

Meaning of 2 din radio wires

Connecting tulips 2 din radio

You can read more about the pinout of the ISO-Euro connector and connecting Podofo radios and similar ones on the pages of our website.

Video - examples of connecting 2 DIN radios

Connection diagrams are, of course, good, but it’s much more clear to see how someone has already gone before you by connecting a 2-din radio to a standard place and made a fairly sensible video about it. So, I suggest you familiarize yourself with the most outstanding works of connecting radio tape recorders that are only available in the YouTube collection.

Connecting a 2 din radio using the example of a Lada Priora

Connecting a 2 din radio in a Kia Rio or Hyundai Solaris

Connecting a 2 din radio in Renault Logan or Sandero

Connecting a 2 din radio in a Toyota Corolla 120

From the videos it follows that there is nothing particularly complicated, except for partial disassembly of the car’s dashboard, connecting a 2 din radio to its standard location is no different. You just need to buy everything you need, understand the connection diagram and pinout of the radio, as well as the wires, and slowly connect everything. This process will not present any problems for any more or less handy person.

How to connect a camera, phone and steering wheel buttons to a 2 DIN radio

The issues of connecting steering wheel control buttons, a rear view camera and synchronizing a phone with it to a Chinese 2 din radio are so extensive that one article is not enough to discuss these topics. Therefore, we decided to break these topics down into the following articles:

How to remove the standard radio of the Lada Priora Grants.

In order to pull it out, we need two keys, which are usually used to pull out music. or something flat and not bendable) some masters pull out music with women's hair bobby pins

Take these keys and insert them between buttons 2,3 and 5,6

move them apart (left key to the left, right key to the right) and at the same time pull them out.

I'll tell you in advance. In order to remove the radio more easily, behind the glove compartment you need to cut off the ties that hold the antenna wire. All I had to do was cut off 1 tie and the wire came free. We take out the radio and see if you have a good configuration, you will already have a blue wire inserted. bright blue without any stripes. if not, then read on. because the equipment of my car is almost luxury, but not luxury, I don’t have this wire, I had to make it myself. We take this “Mother” terminal, the smallest one and solder a wire to it, 10-15 cm is enough. then we pull out the connectors from the radio, we need a connector in which the wires are responsible for power. Here it is. inserted in the bottom row.

Next, I took a probe and looked at all the contacts in search of the one that turns on when the radio is turned on and turns off when turned off, and I found it.

This contact is located in the first row of the bottom terminal, second from the right, when viewed from behind:

We compare this input with the chip. We find a place where we will have a terminal, estimate - the terminal is too big and will not fit into the connector, trouble, take a sharp knife or blade and cut off the fixing grooves on the bottom side that prevent the terminal from getting through. cut it off - well done. we try, it won’t fit on top again, trouble, we take the wire from the terminal that we soldered earlier and push it inside from the inside of the connector from the radio and insert it all the way. Let's see what you got. The wires should not fall out and should not jump out from the outside. Let's see what I got

Next, I’ll tell you about my choice of an amplifier connection kit.

At first, my amplifier was connected with the most simple, so to speak, set for connecting a 2-channel amplifier. by Mystery

But with the arrival of winter, the contacts on the tulips broke off and channel 1 stopped working. and plus I lost the ground wire