Kalina 2 antifreeze volume

Which antifreeze to choose and what volume is needed

To completely change the cooling water in a 2nd generation Lada Kalina/Kalina car, you need 7.8 liters of antifreeze or antifreeze, depending on what you choose. Reddish Felix antifreeze is poured from the factory.

To completely replace the coolant (cooling water), we will need to purchase either one 10-liter canister, or two 5-liter containers.

Choosing antifreeze to replace

If reddish antifreeze was poured from the factory, then we recommend creating a replacement with reddish one.

• AGA 003Z (-40*) reddish 10l cost from 1000 rub.
• Professional Premium G-12 reddish 10 l cost from 700 rub.
• SINTEC LUX G-12 reddish 10l cost from 1000 rub.
• FELIX Carbox-40 (10 l) red price from 950 rub.
• NIAGARA G12 (10 l) red price from 800 rub.
• Arctic Circle G12 (10 l) red price from 700 rub.

All of the manufacturers mentioned above have proven themselves, so antifreeze from these manufacturers can be used for replacement.

What is needed for replacement

• Container for draining old antifreeze for 6-8 liters.
• 16mm head
• 13mm socket wrench for removing the starter on the 16 valve version of Kalina

It is better to create a replacement for a cool engine. Before replacement, you should release the pressure in the system by unscrewing the cap of the expansion tank. In order to freely access the drain plug, you need to remove the middle mud flap.

Choices

When choosing, do not neglect the color of the liquid. The color is intended to indicate certain properties of the antifreeze, so replace it only with an option with an identical color.

Recommended brands of antifreeze include the following products:

• “AGA 003Z” (temperature minus 40 degrees), has a red color, costs approximately 1 thousand rubles. for a 10 liter container.
• “Professional Premium” belongs to the “G-12” category, and the cost of a similar “tank” reaches 700 rubles.
• “SINTEC LUX G-12” is also characterized by a red tint and costs from 1 thousand rubles. for a volume of 10 liters.
• “FELIX Carbox-40”, a canister of the same volume with red liquid will cost the owner from 950 rubles.
• "NIAGARA", substance "G12"; for a volume of 10 liters you will need to pay at least 800 rubles.
• “Arctic Circle”, a substance with similar parameters; A 10-liter container costs at least 700 rubles.

Read also: Is it possible to make money on your gazelle?

Antifreeze from the above-mentioned manufacturers has proven itself quite well, so you can purchase it without the slightest hint of doubt.

Instructions for replacing Coolant

On Kalinas with 8 and 16 valve engines, the coolant replacement is different. Old fluid can be drained from a radiator without any problems, but from a block on a 16- valve engine it is more difficult. You will have to unscrew the starter.

Replacing the coolant. Kalina

The time has come to change the coolant and the question arose whether to fill in Antifreeze or Tosol

, and how did you do it...

Read:

Features of replacing antifreeze on a Lada Kalina car

Replacing antifreeze

produced after 5 years.

Replacing antifreeze on an 8-valve Lada Kalina engine

So, we relieve the pressure in the system by unscrewing the cap of the expansion tank. Then we remove the motor protection to get to the drain plug.

We take a container with a volume of 6-8 liters. and place it under the drain hole located at the bottom right of the radiator. To make the pressure weaker, screw the expansion tank cap back.

Types of coolant for Lada Kalina

In Lada Kalina, the coolant must be replaced on a regular basis every 50 thousand kilometers. It is worth remembering that when operating a car in difficult urban or extreme conditions, the coolant should be replaced more often, because the engine operates under increased loads and the antifreeze reaches its potential faster.

In order to choose a high-quality coolant for the Lada Kalina, you must give preference to the original manufacturer, for example, the Cool Stream brand. The car owner should remember that before updating the refrigerant, the used coolant must be drained and the system flushed with a special compound or distilled water. This is, first of all, necessary to remove suspended matter, metal shavings from the bottom of the system and the remains of old liquid.

We recommend: Replacing the handbrake cable on a VAZ 2107

Useful expert advice

If the expansion tank cap leaks and does not hold pressure, it should be replaced

• The lid will expand. tank 2108 2108-1311065 Automatic device price from 130 rub.
• The lid will expand. tank 2108 LUZAR LL 0108 price from 100 rub.
• The lid will expand. tank 2108 Chistopol 2108-1311065 price from 70 rub.

After replacing the antifreeze, check all pipes for signs of leakage. If necessary, replace the pipe clamps.

AVTOVAZ recommends replacing the fluid in the cooling system of the Lada Kalina every 75 thousand km of the vehicle or after five years, whichever comes first. Our illustrated step-by-step instructions will help you complete this procedure yourself.

LADA > Kalina

It is more convenient to replace the coolant when the car is installed on an inspection ditch or overpass.

Determining Thermostat Operation

After warming up the LADA Kalina engine, carefully touch the lower outlet hose of the radiator assembly. Its heating will indicate the presence of refrigerant circulation in the so-called large circle. After the system fan turns off, removing heat from the radiator honeycombs, turn off the engine and note the level in the previously indicated tank.

Read also: The safest child seat

Now the procedure for replacing the fluid in a Lada Kalina car can be considered completely completed.

1449660639_2279_4_9a_01zh

We unscrew the plug and drain the coolant from the cylinder block.

We tighten the drain plugs of the radiator and cylinder block. The connection between the plug and the cylinder block uses a conical thread that does not require additional sealing. Tighten the drain plug of the cylinder block to a torque of 25–30 Nm. We pour the fluid recommended by the manufacturer into the engine cooling system through the expansion tank until it is full. Let's start the engine. With the engine running, vigorously compress all the hoses of the cooling system several times in turn - this will help the fluid fill the system and displace air from it. As the coolant level in the expansion tank drops, bring it to normal and screw on the tank cap. When the engine warms up, the outlet (lower) radiator hose should be cold for some time, and then quickly heat up, which will indicate the beginning of fluid circulation in a large circle. After waiting for the cooling system fan to turn on, stop the engine. After the engine has cooled, check the coolant level again and, if necessary, replenish the system.

Welcome! Thanks to this liquid, the car engine is cooled - the crankshaft, camshaft, cylinder block and other parts. Over time, the liquid becomes unusable and loses its properties: the additives expire, the car begins to overheat much more often, and this leads to rapid engine failure.

Note! You will need the following tools: a repair kit, socket wrenches, hex wrenches, wrenches and screwdrivers, a clean rag to remove traces of spilled liquid on the car engine.

Summary:

When to change the fluid?

There are several opinions: some complain about the replacement according to the regulations, others - that it can take longer, who to believe? Recently, many fakes have been produced for auto parts and components, and liquid is no exception. Therefore, when choosing a new liquid, be extremely careful. (The article will help you recognize a fake and buy a quality product: “Detailed information about Antifreeze and Antifreeze”)

The factory recommends changing the fluid every 75 thousand km or 3 years from the moment of filling. Keep in mind, these are deadlines. If possible, replace more often, do not let the additives wear out, because thanks to them the cooling system is protected from premature corrosion and other unfavorable things.

Note! So, we change the fluid either according to the factory’s recommendation or according to its appearance. To do this, unscrew the cap of the expansion tank (indicated by the arrow) and look inside. If the color of the liquid changes - it has acquired shades of rust, has become red-brown, then it is time to change it. An oil film on the surface is also an alarm bell for replacement.

conclusions

As you can see for yourself, there is nothing difficult about changing antifreeze yourself; even the driver who is far from car repair can perform such work.

According to the maintenance regulations for Lada cars, the coolant (antifreeze, antifreeze) should be changed every 75 thousand km. mileage or after 5 years, whichever comes first. At this moment, it is important to choose the right liquid correctly, then there will be no comments about it for the same amount of time.

How to replace coolant on a VAZ 1117-1119?

Note!

At engine operating temperature, the fluid heats up to 100 degrees - you can get burned. Sometimes you urgently need to cool the liquid - unscrew the cap of the expansion tank. Act carefully and smoothly, and completely remove the lid only if the hissing sound disappears, otherwise the air inside the tank will knock out the lid and the liquid will flow out in a column - everything around will get dirty, and you can get burned. It is best to work with a cold engine.

Remember! The liquid is highly toxic, pour it into a tightly closed container and throw it away not in a bucket, but in a landfill!

Merging

Drive the car into the inspection hole and ensure that it stands level. If this is not possible, park the car so that the front is higher than the rear.

How to fill

1. After successfully completing the first part, you can move on to the second.
2. We screw the drain plugs back, as well as the plug from the radiator.
3. Disconnect the hose from the tank by loosening the clamps.
4. Fill in the required amount of antifreeze.
5. Reconnect the hose and continue pouring until the liquid reaches the 3 cm mark below the “max”.
6. We tighten the cap of the expansion tank.
7. Reconnect the terminal.
8. Turn on the engine and warm up until the fan turns on. Check the level.

We remove or restore the hoses in place

Done, the replacement in the Kalina car has been successfully completed.

Need for replacement

Antifreeze on Kalina is replaced, in accordance with the manufacturer’s recommendations, either after two years of operation or after 60,000 km. mileage

. The occurrence of one of these conditions indicates the need for replacement.

For the action you need to prepare a tool. The list is quite simple:

• figured (phillips) screwdriver;
• open-end wrench or socket 13;
• head at 17;
• collar

How to drain

To get started, you will need to acquire some tools:

• antifreeze or 10 liters of antifreeze;
• screwdriver;
• delivery key for 13.

Now with all this baggage you can begin the first part of the work. Let the engine cool down first.

1. Place the machine on level ground.
2. Open the hood and remove the engine splash guard.
3. Remove the negative terminal from the battery.
4. We take out the plug from the tank.

https://www.youtube.com/watch?v=WzyeKWCDrMg

Unscrew the cap from the tank

• Place the drain container and unscrew the drain plug.
• Remove the ignition module and bracket.
• Remove the plug from the radiator. And now you need to drain all the antifreeze.