Menu
Apple
Canon
Electrolux
Indesit
Samsung
Search
Feedback
Manualza!
- Apple Computers
- iMac 2012
- Mac Mini 2014
- Mac Pro 2019Coming Soon
- PDA OS
- iPad iOS 6.1
- iPad iOS 8.1
- Laptops
- MacBook Air
- MacBook Pro 15″ 2012
- MacBook Pro Retina 15″ 2014
- Cell Phones
- iPhone 4S
- iPhone 5
- iPhone XComing soon
- Players
- iPod classic 160 GB
- iPod touch
- Software
- iMovie
- iPhoto
- Digital IXUS 110 IS
- EN2900AOX
- WIDL 106
- 2433BW
23 pages of detailed instructions and user manuals
20:03
Car alarm. Connection diagram
02:55
Mongoose AMG 700 remote recoding
03:15
Why is the MONGOOSE alarm system harmful?
02:02
How to register a new Mongoose alarm key fob
11:21
Electric bicycle Mongoose Tyax 29 Bafang 750w + accessories review
07:42
Bafang 750w bottom bracket motor vs road bike racer. 6+
16:59
750W electric bike with Bafang central motor
12:27
Ride on Bafang 750
An output for automatic closing of windows when remotely…
Page 3
- Image
- Text
• Output for automatic closing of windows during remote or automatic
chelical arming;
• Output for controlling the electric trunk lock;
• Channel with software selection of one of two functions:
1. Control of an external remote engine start device.
2. Pulse with fixation for universal purposes, including for switching on
ignition support functions when arming with the engine running
tele.
•• The AMG 750/1 is equipped with a built-in normally closed electrical blocking relay
ric motor control circuits and has a programmable status output for connecting an additional external blocking relay. The output can be configured by software to operate with a normally closed or normally open relay.
— The AMG 750/1 also has a special input that allows the function
central lock. When you programmatically enable the MAwK™ function, locking the doors with a key, you can simultaneously arm the alarm without using the remote control
remote control.
— Programmable input of positive polarity will provide full Security
your car if the doors of your car are equipped with positive
solid limit switches. If the polarity of the limit switches is negative, you can use this input when operating the AMG 750/1 together with an external unit
remote engine start or enable the warning function
lights off.
By purchasing the standard AMG 750/1 kit you receive:
• Central control unit with complete installation kit.
• Two-level shock sensor that can distinguish between weak and strong impacts
the body of the car, which allows the alarm to respond to them, either with a short trill of a siren, or by activating a full alarm.
•
Two remote control key fobs.
• LED for indicating alarm operating modes, intended for installation
in a car.
• Self-adhesive membrane-type emergency shutdown button FOS™, place
settings in the car you should choose together with your installation
officer, in such a way as to ensure sufficient secrecy of its location
zheniya, on the one hand, and ease of use, on the other.
• Complete instructions for controlling all modes of the AMG 750/1.
•• If you want to improve the security properties of your alarm system, we recommend
You will need to purchase an additional two-level volume sensor capable of recording
prevent any movement both inside the vehicle and in its immediate vicinity. The AMG 750/1 has a special input for connecting such a sensor.
User's Guide and Installation Instructions.
2
Prepared by AutoSet. Car alarms and car electronics.
www.AutoSet.ru
Page 21
Siren output Pager output (+300mA) Status output (-ZOOmA) (programmable) Hood/trunk switch (-)
Trunk release output -300mA Ignition input (+12V) Door end (-) Central locking control input
(with programmable function
arming)
Locking relay NC
contact Locking relay
Common
contact
NO locking relay
contact Release relay
NC to
contact Release relay
Common
contact Release relay
NO
contact Programmable input (+)
Window closing output (-ZOOmA) Programmable output (-ZOOmA)
User's Guide and Installation Instructions.
Alarm remote control key fob
Page 4
- Image
- Text
Alarm remote control key fob.
It is a miniature radio transmitter powered by a 12 volt
batteries (type 23 A), which last for approximately 1 year of operation. A significant decrease in the range of reception of transmitter commands by the system indicates the need to replace the battery. The key fob has two control buttons and an indicator
Light-emitting diode. When you press any of the buttons, the transmitter generates and transmits a special coded command, which changes with each new button press, thus preventing the possibility of interception of your alarm code by a code grabber.
button 1
Automotive security system "MONGOOSE" Model AMG-750/1.
button 2
3
Prepared by AutoSet. Car alarms and car electronics.
www.AutoSet.ru
Catalog of Keychains and Pagers for Car Alarms.
If the key fob is broken or lost, then it is not at all necessary to change the entire alarm system; it is enough to replace the lost key fob with a new one. Search for an alarm model using the key fob.One way to find out the manufacturer and model of a car alarm is by looking at the radio transmitter key fob! Just find a photo of a keychain identical to yours in the catalog. In some cases, not only external similarity is important, but also small details such as the color of the LEDs, the shape of the buttons, and the color-shade of the case. For example, you need a key fob for a StarLine car alarm, go here and select. Also read the articles. If you have any questions, write to us by email and we will try to help you. Here you will find a car alarm key fob scher-khan magicar 6 5 4 3 iii iv Roman Arabic cenmax st5 st7 v7 v5 vigilant starline b9 b6 a6 a8 a9, we will give advice on how to register the key fob for the alarm, suppose you need to do it so that the car alarm recognizes the cenmax key fob st-5 or pager key fobs cher khan sher scher-khan magicar sixth fifth third or main two-way key fob starline a8 a9 a6 b9 b6 entry into the system occurs using the service button, a certain combination of button presses and key fob buttons will register the transmitter in the car alarm
| Keychains - Pagers (337) ALLIGATOR | APS - APS | BRUIN | CENMAX | CENTURION | CHALLENGER | CLIFFORD | DAVINCI | FIGHTER | FLASHPOINT | HARPOON | iCODE | JAGUAR | KGB | LEOPARD | MEGAFORCER | MONGOOSE | MYSTERY | PANDORA | PANTERA | PHARAON | RED SCORPIO | SCHER-KHAN | SHERIFF | SOBR | STARLINE | SWORD | TOMAHAWK | STALKER | Keychains (No Display) (150) ALLIGATOR | AMAX | APS - APS | Boomerang | Cenmax | CHALLENGER | EXCELLENT | FIGHTER | GREEN BUX | GUARD – REEF – BLACK BUG | Harpoon | INSPECTOR | JAGUAR | KGB | LEOPARD | MAGNUM | MONGOOSE | PANDORA | PANTERA | Partisan | PHARAON | SCHER-KHAN | SHERIFF | SOBR | StarLine Twage | TOMAHAWK | TWO-WAY |
| Silicone Keychain Cases (255) Alligator | Cenmax Vigiland | Jaguar | KGB | Pandora | Pantera | Scher-Khan | Sobr | StarLine | Tomahawk | Stalker | Cases for Keychains, leather (208) APS | ALLIGATOR | BLACK BUG | BRUIN | CENMAX | CENTURION | CHALLENGER | DAVINCI | FLASHPOINT | HARPOON | JAGUAR | KGB | LEGENDFORD | LEOPARD | MONGOOSE | MYSTERY | PANDORA | PANTERA | PHARAON | STARLINE | BAIKAL | GRIFFIN | SCHER-KHAN | SHERIFF | STALKER | TOMAHAWK |
| Keychain Housings (105) Alligator | Bruin | Cenmax | Excellent | Jaguar | KGB | Leopard | Pandora | Pantera | Scher-Khan | Sheriff | StarLine | Tomahawk | Stalker | Key housings for OEM key fobs (38) AUDI | HONDA | HYUNDAI | KIA | MAZDA | MERSDES | NISSAN | TOYOTA |
| Key Fob Parts (162) Alligator Key Fob Parts | Bruin key fob parts | Cenmax key fob spare parts | Centurion Key Fob Parts | Jaguar Key Fob Parts | KGB key fob spare parts | Leopard key fob spare parts | Pandora Keychain Parts | Pantera key fob parts | Scher-Khan key fob spare parts | Sheriff key fob spare parts | Spare parts for StarLine key fobs | Tomahawk Key Fob Parts | Spare parts for key fobs Stalker | Covers for standard key fobs smart keys (77) Audi | BMW | Chevrolet | Citroen | Ford | Honda | Hyundai | Infinity | KIA | Lexus | Mazda | Mercedes | Nissan | Peugeot | Range Rover | Skoda | Subaru | Suzuki | Toyota | VolksWagen |
| Car Alarm (62) APS | Alligator | Bagira | Jaguar | Mongoose | Pandora | Pantera | Pharaoh | Sher-Khan | Sheriff | StarLine Twage | Car Alarm for trucks | Moto Alarm (6) Centurion | Pharaoh | Star Line |
| Immobilizers (9) Polar Wolf | Meguna Sphinx | Satellite GPS/GSM security systems (20) Sobr | StarLine | AutoFon |
| Accessories (103) Autostart | Promotions | AlcoTester | Video Recorders | Paper Instructions | Immobilizer Bypass | Driver glasses | Pillows for the car | Flash drives | Flashlights | Clock | Power elements Batteries | Spare parts for car alarms (72) spare parts |
| Discounted Products (31) | Services (5) Key fob programming | Chips for autostart | Replacing batteries | Replacing key fob housings |
| 9,950.00 rub. |
Rules of use, Required information, Management of basic security modes
Pin code, Emergency alarm shutdown, Arming, Security
- Image
- Text
Necessary information.
PIN code.
To increase the security of alarm control, the AMG 750/1 provides
the possibility of using a personal code (PIN code) for emergency shutdown
Signaling the alarm, entering the programming mode of additional key fobs and programmable functions, disabling the anti-burglary function Anti Hi-Jack.
The PIN code can consist of one or two digits and range from 1 to 9 or
from 11 to 99 depending on the software installation. When the system is manufactured, a code equal to 1 is written into it; however, we recommend that after installing the system, set
a different PIN code value (read how to do this in the “Programming” section).
This will allow you to protect your security system from unauthorized removal.
tia from security.
To enter the PIN code, use the emergency shutdown button and the ignition key.
Emergency alarm shutdown.
If the alarm key fob is missing or faulty to remove the system
from security you need to: open the door with the key, which will turn on the alarm mode, get into the car, turn on the ignition and leave it in the on position.
If you have set a unique PIN code, press the emergency shutdown button.
enter a number of times equal to the specified PIN code value and turn off the ignition. If the code is entered correctly, the system will be disarmed.
If a two-digit code is set, then by entering the first digit as described above, again
turn on the ignition and also enter the second one, then turn off the ignition. If the code is entered correctly, the system will be disarmed.
If the PIN code is entered incorrectly twice, the system will block further
entering a PIN code. The LED will blink with double flashes.
Terms of use
Management of main security modes
Arming.
To arm the alarm, press when the ignition is off.
button 1 of the key fob, if all the doors, hood and trunk are closed, the siren will sound one sound and the lights will flash once. The system LED will begin to flash slowly and the door locks will close (if the vehicle is equipped with locking drives). If any of the doors, hood or trunk are left unlocked,
Three additional beeps will sound and the lights will flash three times.
Security.
In security mode, the alarm monitors the status of all available limit switches.
door switches, hood, trunk, ignition switches, and sensor status
5
Automotive security system "MONGOOSE" Model AMG-750/1.
Prepared by AutoSet. Car alarms and car electronics.
www.AutoSet.ru
Alarm, Disarming, Panic
Silent arming, Quiet disarming, Arming with disabled sensors
- Image
- Text
impact, as well as, if additionally installed, a volume sensor, etc. In addition, in security mode, engine starting is blocked. If any of the security zones is violated,
Now, a 30 second alarm mode is activated.
Anxiety.
If the alarm mode is turned on, the siren will sound and the signal lights will flash.
press for 30 seconds or until the alarm is turned off using any key fob button.
When the warning zone of the shock sensor or the external zone is triggered, additional
sensor, a short siren trill will sound.
Disarming.
To disarm the alarm, you need to press button 2 on the key fob, the siren will sound 2
sound and the warning lights will flash twice. The LED will go out, the door
the locks will open (if the car is equipped with locking drives). If the alarm mode was turned on during the security period, then when disarming there will be four
additional sound signals.
Panic.
If you press and hold for 3 seconds with the ignition off. button 1
The siren and warning lights will turn on. Pressing button 1 again turns off
mode. Enabling and then disabling Panic does not change the system state.
we, that is, it will remain in security mode if it was in this mode, the doors will remain locked, but if the security mode was turned off and the door locks are open,
arming and door locking will not occur.
Quiet arming.
When it is necessary to arm the alarm without sound confirmation,
To avoid disturbing others with the sounds of the siren, press button 2 immediately before pressing button 1. In this case, the execution of commands will be confirmed only by a light signal. Otherwise, the mode is completely similar to setting with
sound confirmation. When silently arming, audible warning
information about unlocked doors, hood and trunk is stored, so there is no danger that you
leave your car unlocked.
Quiet disarming.
If you need to turn off the sound signals when disarming, press the button
1 before pressing button 2. Execution of commands in this case will be confirmed
only by light signals. Otherwise, the mode is completely similar to setting with
sound confirmation. If an alarm is activated during the security period, the sound warning
the warning will remain.
Arming with disabled sensors.
By pressing button 1 twice when arming, you will disable the interior sensors -
ki, this may be required when, for example, passengers or animals remain inside the car.
User's Guide and Installation Instructions.
6
Prepared by AutoSet. Car alarms and car electronics.
www.AutoSet.ru
Quiet security
Page 8
- Image
- Text
When parking your car in busy areas, the off mode
warning zone
a sensor that will allow you to avoid the constant “chirping” of the siren, while maintaining a full-fledged security mode. To turn on the mode, press button 2 immediately after button 1.
For arming with completely or partially disabled sensors without
sound confirmation, press the buttons in the sequence 2-1-1 or 2-1-2 corresponding
responsibly.
Security with the engine running
(with ISF™ ignition support function).
AMG 750/1 allows you to turn on the security mode while the engine is running. When installing
For the system, you can choose either a security option with an ignition support function
ISF™, which will allow you not to leave your keys in the car, or without it.
To arm the alarm with the engine running, open the door,
press and hold button 2 for 3 seconds, ignition support will turn on (if the corresponding function is selected by programming and when installing the alarm,
necessary connections are complete).
Turning on the ignition support system confirms
emits a short beep. After the beep, turn off the ignition and
remove the key from the lock. Within 10 seconds, close the door and press
button 1 - the security mode is activated with disabled sensors, and there will also be no
Engine blocking is activated. To turn off, press buttons 2 and
1. When disarmed, the ignition support will turn off. Moreover, if security is not
was turned off for 10 minutes or the ignition was turned off, or the alarm was activated, the engine blocking and full security mode are automatically activated. After turning on the full security mode for any reason, press button 2 to disarm it.
NOTE: To avoid erroneously switching on the mode while driving,
arming the vehicle with the engine running is allowed by the system only within 10 seconds after closing the door with the ignition on, the door must be closed no later than 10 seconds after the sound signal confirms
enabling the ignition support.
When the Anti Hi-jack function is activated,
After opening the door, first enter with the button
emergency shutdown the lowest digit of the PIN code or press the combination of buttons on the key fob programmed to disable the passive immobilizer to disable the Anti Hi-jack, and then press button 2 to turn on the ignition support.
Remember
that turning off Anti Hi-jack when the door is open disables its activation
tion from opening the door until the next time the ignition is turned on.
When the passive immobilizer function is activated,
after disarming the system
The engine lock will now turn on. To learn how to disable it, see the section Passive immobilizer mode.
Quiet security.
When an alarm in silent security mode is triggered, the indication
alarms are produced only by indicator lights and via the pager channel, the siren does not turn on. To activate the mode, it is necessary to immediately when arming
After pressing button 1, press buttons 1 and 2 simultaneously.
Automotive security system "MONGOOSE" Model AMG-750/1.
7
Prepared by AutoSet. Car alarms and car electronics.
www.AutoSet.ru
Using additional security functions, Two-step disarming, Auto-arming
Remote control of central locking, Passive immobilizer mode
- Image
- Text
Automatic re-arming
(protection against accidental pressing).
If within 30 sec. after disarming, none of the doors opened,
hood or trunk, and the ignition is not turned on, the system will automatically return -
go into security mode
Two-step disarming.
If the alarm is triggered, then pressing button 1 once will only turn off the siren
and warning lights (if the cause of the alarm has been eliminated, i.e., for example, the
that open door or the shock sensor stopped working). If the reason causing
When an alarm occurs, it is saved and you need to press the button again to turn it off.
To completely disable the security, press the button again after turning off
anxiety.
Using additional security functions
Auto-staging.
The function can be turned on or off by programming.
If the function is enabled, then after turning off the ignition, opening and closing
When the door opens, the warning lights will flash twice and the LED will begin to flash quickly. If within 30 seconds after this all doors, as well as the hood and trunk, remain closed, the alarm will be armed. Depending on the software setting, the locks
doors may be locked or not.
If necessary, you can temporarily disable auto-arrangement. For this purpose in
within 30 seconds of closing the door, press button 2. The warning lights will flash twice and the LED will flash slowly. After this, auto-arming will be disabled.
until the next time the ignition is turned off.
Automatic door locking when the ignition is turned on.
The feature may be disabled during installation.
5 seconds after the ignition is turned on, the electric locks are automatically locked.
There are no door locks; when the ignition is turned off, the locks are immediately unlocked. If any of the doors are open during these 5 seconds, automatic locking will not occur to prevent the keys from being locked inside the vehicle.
Remote control of central locking.
When the ignition is turned on, the car door locks can be locked at any time.
locked or opened by pressing buttons 1 or 2 on the key fob, respectively.
Passive immobilizer mode.
The mode is turned on and off by programming
If the mode is software enabled, then immediately after opening the door when the
When the ignition is turned on, the engine lock will turn on and the LED will begin to flash uniformly.
long flashes. No other security zones are activated in this case.
will be, the door locks will not lock.
User's Guide and Installation Instructions.
8
Prepared by AutoSet. Car alarms and car electronics.
www.AutoSet.ru
AMG-750
INSTALLATION INSTRUCTIONS
Before you start
Before starting installation, disconnect the “-” terminal of the car battery.
Select the best locations for the location of alarm elements and units according to the following criteria:
- installation secrecy;
- absence near sources of heat and moisture;
- short length of connecting wires;
- reducing the interference of alarm devices and standard vehicle electronics. For example, the pager should be installed away from the alarm control unit, etc.
- The alarm control unit is installed inside the cabin. To obtain the maximum range of the key fobs, the unit's radio antenna should be placed as high as possible, away from metal body panels and electrical wiring harnesses. It should not be lengthened, shortened, or folded into loops.
- The siren is installed under the hood, under the fenders, etc. in a place inaccessible to the hijacker, with the mouthpiece down or to the side. If the siren is self-powered, it is necessary to provide access to the service key well. It is recommended to connect the siren wires (including “-“) inside the cabin.
- The hood and trunk limit switches cut into places protected from moisture that are inaccessible when the hood and trunk are closed. It is necessary to periodically lubricate the rubbing parts of the limit switches to avoid jamming and corrosion.
- The shock sensor is installed in the passenger compartment (preferably near the longitudinal axis of the car) on the metal of the body and is attached with self-tapping screws or glued.
- Additional sensors (ultrasonic, microwave, etc.) are installed in the best places from the point of view of their operation.
- All high-current circuits (flashing lights, central locking, etc.) must be protected by fuses for the appropriate currents.
- It is recommended to solder the contacts in places where there are breaks in the ignition, starter, etc. circuits.
- Since many system functions are programmable, first set the parameters you need and then connect the corresponding circuits.
Connecting wires
- Red - power supply for the system lights relay - connect to +12 V of the car through a 15 A fuse.
- Black - “-” system - attach to the car body using a bolt.
- Orange - information input “ignition” - connect to the point where +12 V is present in the “On” and “Starter” ignition key positions. Pay attention to the reliability of this connection - it will affect the safe operation of the vehicle.
- Black/green, black/white wires - outputs for flashing lights - connect to the hazard warning lights (turn signals) or side lights of both sides of the car through 5 A fuses. If necessary, use an additional relay.
- Brown - siren output - connect to the “+” input of the siren with a current consumption of no more than 1.5 A.
- Gray - “-” limit switch input - connect to the hood and trunk limit switches.
- Green – “-” limit switch input – connect to the “-” door limit switches. (In some cars, standard door switches have separate wiring for controlling interior lights, power windows, etc. In this case, connection to them should be made through decoupling diodes).
- Yellow - “+” limit switch input - connect to the “+” door limit switches (Volga, Ford cars, etc.). It is possible to use this input to connect to the standard trunk light switch in some cars.
- Blue/black - output of an additional channel - a “-” pulse (300 mA max.) appears on this wire when the additional channel is activated (button No. 2). In this case, you can program one of three algorithms for its operation:
- trunk lock: a signal lasting 1 s appears at the output, the trunk limit switch and the shock sensor are turned off. After opening and closing the trunk, after 10 s. The limit switch and shock sensor are again included in the security chain. This algorithm allows you to open the trunk without disarming the system. The channel does not work when the ignition is on.
- Short pulse: a signal lasting 1 s appears at the output. regardless of the position of the ignition key and the alarm mode.
- Long pulse: when a command is given by button 2, a signal appears at the output and continues until a new command is given by button 2.
