How to properly move car sills

Composition, characteristics and principle of action of Movil

The abbreviation “MoVil” was formed from the names of the cities (Moscow and Vilnius) in which this anti-corrosion composition was first created. Now Movil is not a specific product, but a whole direction in the production of anti-rust products, which are produced by various companies in Russia and the CIS countries.

Movil is understood as a universal anticorrosive agent in the form of a liquid, spray, paste of black or dark brown color, intended for treating the body and hidden cavities of the car. The product will also help keep the elements of the machine intact and protect them from rust if it has to be preserved.

The composition of the product is quite complex. It is represented by the following ingredients:

• white spirit solvent;
• paraffin;
• zinc;
• machine oil;
• calcium sulfonate;
• kerosene;
• drying oil;
• modifying additives;
• corrosion inhibitors;
• thixotropic substances;
• additives for displacing moisture;
• deodorizing components.

Movil is suitable for any base materials, fits well on painted and unpainted surfaces, and does not require prior removal of bitumen or mastic insulation. The product is incompatible only with synthetic mastics - the latter become loose and peel off from the base. Rubber products also react poorly to Movil - the composition can damage them.

Thanks to thixotropy, the product quickly flows into the smallest cracks and microscopic chips, fills them and creates an active anti-corrosion film. A thin oily layer prevents the formation of rust, isolating the metal from moisture, air, and aggressive chemicals that cause corrosion. Movil works as a rust converter, eliminating already formed foci due to the presence of special additives.

Different brands of Movili may differ in density, freezing point, and other indicators, but for most products the technical characteristics are close to the following:

• spreadability on metal – up to 10 mm;
• share of volatile substances – up to 57%;
• density – 840–860 kg/sq. m;
• time until complete drying - about 120 minutes;
• corrosion resistance in sea water – 99%.

For what surfaces is Movil anticorrosive agent intended?

Movil with a rust converter can be used on any metal substrates. They are allowed to work on corrosion, as well as on undamaged metal, painted and varnished surfaces. Most often, car owners prefer to use the composition for treating closed cavities and complex elements:

• front roof pillars - condensation accumulates on them, which over time causes rust;
• thresholds - the presence of holes on the parts provokes the penetration of moisture;
• hidden cavities in the trunk - felt can accumulate water, which increases the risk of corrosion;
• the inner surface of the doors - condensation, dirt appears here constantly;
• areas where seals are attached - moisture regularly accumulates under the sealing elements and causes rusting of the metal.

There is no point in applying Movil to the underbody, wheel arches, or open body parts - it cannot boast of high mechanical strength (with the exception of special high-strength Movil). Also, due to the strong chemical odor associated with the presence of solvent, the product should not be used inside the car. It is forbidden to spray Movil on rubberized parts, as well as surfaces on which there is a layer of synthetic mastic.

Technology: how to use Movil solution to protect cars and precautions

To complete the work, it is important to select the consistency of the mixture by adding a solvent. It must be remembered that the fluidity of the solution depends on the ambient temperature; 20°C is considered optimal. The treatment procedure using an aerosol looks much simpler, because the mixture is already in working condition.

Treatment of easily accessible areas

For those who are interested in how to use Movil anticorrosive for cars in easily accessible places, you should familiarize yourself with the following points:

• Prepare the surface by removing dirt and loose layers of oxides.
• Degrease the work area and dry it.
• Apply the first layer of anticorrosive with a roller or brush. If an aerosol is used, the can should be shaken several times beforehand. The solution is fed through the spray head.
• Dry and apply a second and, if necessary, a third layer with intermediate drying.
• The coating dries completely within 24 hours; it is not advisable to operate the car during this period.

Important! If preservative gets on the surface of the paintwork, it must be quickly wiped off with a cleaner for bitumen stains.

Treatment of hidden cavities

The operation has its own characteristics and proceeds according to the following scheme:

• Remove elements that interfere with the work process.
• If there are drainage holes, rinse the cavities thoroughly.
• Treat the cavity with a rust converter and rinse after a while using an alkaline reagent.
• Dry the closed cavity with a stream of warm air.
• Connect the flexible tube from the kit to the cylinder; if the cylinder is designed to work with a gun, then install it in its regular place.
• Insert the end of the tube or gun into the technological hole and spray the anticorrosive agent.

How to choose a product

The choice of Movils on the market is extensive, there are products in a can and paste, liquid in cans and on tap. The shape of the product is selected depending on the application area. If you plan to treat hard-to-reach places, you should buy an aerosol with a special long nozzle (flexible tube). The bottling product requires a special gun for Moville - the composition is filled into such a device, after which it will be convenient for them to process even large surfaces.

According to reviews from car enthusiasts, Movili produced in Moscow and St. Petersburg are of the highest quality, and products from Lithuania are usually less effective in operation.

Also in stores there are so-called long-drying Movili, which have higher elasticity, are thick, and create a durable protective layer that does not react to mechanical damage.

Types of Movil

Today in the car market you can find three types of Movil according to the packaging sold:

• Aerosol. This is the most popular type because it is very convenient to apply by spraying. The aerosol is produced in small quantities, the jar has a volume of 250 to 300 ml. The cost of one can is up to 700 rubles. But, if you process the entire body, then in the end you will need several thousand rubles for Movil. One of the disadvantages of aerosol Movil is that when applying it, the can must be kept vertically all the time.
• In a liquid state. This is the cheapest type. Sold in a 3 liter canister. Depending on who the manufacturer is, the price is 300-400 rubles. Liquid, as we know, easily penetrates into the most inaccessible places, seams. The set includes a nozzle in the form of a ball. It is needed for ease of application to the body.
• In a pasty state. Sold in a plastic or iron can. The volume of a can of 860 grams costs about 300 rubles. The paste is thick, it is convenient to treat open surfaces with a wide brush, but seams and hard-to-reach places will have to be treated with the same paste diluted with a solvent.

Now you have chosen the form in which you need Movil, now you need to find out how to use it.

How to use Movil

The composition can be applied to metal that has been cleaned to a “bare” appearance, as well as to a painted and primed base. In the cold season, it is better not to use the product - the effectiveness of the treatment drops already at +10 degrees. If the weather is too hot (above +40 degrees), Movil is also not used, so the best time to work with it is late summer, spring, early autumn. To avoid damage to rubber parts, they must be removed or securely closed in advance.

Preparing the car

Areas of future treatment with Movil must be properly prepared. They are cleaned from dust and dirt, and a portable car wash with a water jet pressure of 60–100 atmospheres is best suited for this purpose. If the product is to be applied to the bottom, the car is washed on a lift. To remove oil stains and petrochemical deposits, special detergents are used.

When a car part is already covered with a thick layer of rust, the latter needs to be cleaned with sandpaper or a grinding machine. This point especially applies to loose rust, which after treatment with Movil will immediately begin to flake off. The same rule applies to cracked paint. Immediately before work, the surface is dried in the open air or by force (for example, by connecting a compressor). Deep chips and holes in the metal are repaired with auto putty before applying anticorrosive.

How to dilute Movil

The composition with zinc and corrosion inhibitors in the form of an aerosol is sold in finished form, and it cannot be diluted, and it should not be. The same rule applies to liquids in jars and canisters: adding solvents and other substances will increase the fluidity of the composition, while reducing its quality. Of course, when adding white spirit or solvent, the product will dry even faster, but the strength characteristics of the film will greatly decrease. At the slightest impact, the formed coating will tear due to poor surface tension.

Paste-like Movils sometimes thicken too much and require dilution, otherwise they are quite difficult to apply. You should not use solvents: it is better to slightly heat the composition in a water bath to make it more liquid. Gentle heating is allowed as many times as required.

How to apply Movil

It is important to apply the product in an even layer, the thickness of which after drying will be 40–60 microns. Movil consumption in this case will be approximately 400 g per square meter of surface. The product is most effective when applied in several layers (usually 2-3).

Movil is sprayed onto the base from a cylinder with a long thin nozzle or worked using a pistol. Since application is carried out under pressure, the active composition penetrates into all crevices, cracks and hard-to-reach places. It is better to apply Movil with a brush to open areas and large areas. The intermediate drying time of the layers should be observed (20–30 minutes), as well as the period until Movil is completely dry (2 hours or according to the manufacturer’s recommendations).

Tips for working with anticorrosive agents are as follows:

• Before you start, you should apply the product to the trunk or door to see how it spreads - in the future you can navigate by the most comfortable method of spraying and approximate consumption;
• if the composition gets on the paintwork, it must be wiped off immediately with a soft cloth - this will be difficult to do later;
• after using Movil, a pungent odor often remains in the car, which can be removed only by leaving the car windows open for at least a couple of hours a day (at first);
• if airing the car does not help in getting rid of the “odor”, you can use carbon odor absorbers;
• The ideal option is not to use the machine for 2–4 days after applying the coating, and only then allow it to be used.

Treatment of hidden cavities

To process the internal cavities of the machine, first dismantle all elements that are removable and can interfere with the work process. If this is possible and there are drainage holes, they are washed and dried with a stream of warm air. If there is old rust, it is removed with a converter and washed with an alkaline solution. Next, attach the nozzle tube to the can, insert it into the cavity and spray Movil.

Bottom treatment with Movil

The bottom must be treated with especially strong compounds, because it is subject to strong mechanical loads. Typically, this body element undergoes anti-corrosion treatment at the factory, but as aggressive factors influence, the protection weakens. In this case, the work should be repeated, choosing long-drying Movil.

The procedure is as follows:

• wash the car, put it on a pit or overpass;
• clean the metal to a shine in places where there is already rust;
• remove swelling, deposits, rotten holes, and weld, cutting off all damaged areas in advance with a grinder;
• prime the metal;
• dismantle elements that interfere with work;
• turn off the fuel supply valve to the system, acting especially carefully if there is gas equipment;
• dry the bottom well with warm air;
• apply Movil in 2–3 layers using a brush using airless spraying;
• dry for 2 hours;
• Reassemble the car, attaching all the removed parts.

Threshold processing

Applying anticorrosive to thresholds is a labor-intensive task, but it is necessary to prevent the development of corrosion. To begin with, perform partial disassembly of the interior, removing all plastic elements. When removing the pads, you need to be careful with the clips and latches - if they are broken, the elements will rattle a lot when driving. Then you need to do the following:

• unscrew the sound insulation;
• find ready-made holes or drill them along the outer part of the thresholds (the second method is not advisable);
• apply Movil from a spray can, inserting a thin nozzle directly into the hole;
• press the sprayer, fill the walls of the thresholds with Movil (use at least 1/3 of the can for each);
• Allow the product to dry completely;
• Cover the drilled holes with rubber inserts (buy them separately at a car store).

Door processing

Usually doors start to rust from the bottom side. If elements of corrosion appear on them, you need to clean the area, prime it, paint it, and only then treat it with Movil. The holes are welded or sealed with auto putty, although the second method is short-lived. Then remove the window handles, unscrew the mounting screws and bolts, remove the latches, and remove the door cards. If wires enter them, carefully disconnect them, recording the correct connection. Afterwards you can wash the door, dry it and apply Movil. As it dries, all removed elements should be returned to their place.

Arch processing

To apply the product to the arches, first remove the wheel arch liners by unscrewing the screws with a Phillips screwdriver. Then the arches are washed and cleaned well, dried and anticorrosive is applied in the standard manner. In order to easily unscrew the screws in the future, you can treat the place where the bolts are screwed in with machine oil.

The process of preparing a car before coating

Most often, the following body elements are treated with Movil:

1. Thresholds;
2. Racks;
3. Headlight covers;
4. Door pockets;
5. Spars;
6. Car arches;
7. Bottom;
8. Glasses.

All these places must be cleaned of dust, dirt and oily deposits before treatment. This can be done using a portable car wash with added detergents.

After that, it is necessary to completely get rid of moisture on the surface being treated. In dry and warm weather, it is enough to simply let the car body dry for several hours. In cold weather, you can use a compressor with warm air.

Next, you need to carefully examine the surface being treated. Applying Movil to rust or areas of paint peeling makes no sense. Only after complete cleaning, degreasing and drying can you proceed to applying the substance.

Precautionary measures

You should work with Movil in the fresh air, since its fumes are toxic. If it is applied in a garage, it is important to ensure good ventilation, otherwise the health consequences will be serious. Be sure to wear a respirator, goggles, gloves and avoid contact of Movil with skin. The product is highly flammable, and you need to work with it away from sources of heat and fire!

If you regularly inspect the car, assess its condition and carry out anti-corrosion treatments, the parts will last an order of magnitude longer. To combat rust, you should use Movil, which boasts affordability and excellent quality.

How to apply Movil correctly. Instructions for use

Providing anti-corrosion protection with Movil is carried out according to the following scheme:

1. First, the surface is cleaned and disinfected.
2. Then the parts to be processed are thoroughly dried.
3. After this, 1 layer of the drug is applied. To do this, you can use a spray tube or a brush.
4. After applying 1 layer, the surface is left to dry. To speed up this process, the treated area can be blown with warm air.
5. Then the 2nd and 3rd layers of the product are applied.
6. This is followed by final drying.

If during work the product accidentally gets on other surfaces, it should be immediately wiped off with a product to remove bitumen stains.

How to treat hidden cavities

To create protection for hard-to-reach areas from corrosion with Movil, the following features must be taken into account:

1. It is necessary to dismantle parts that make it difficult to access the treated areas.
2. The cavities can be washed with clean water through the drainage slots.
3. Then they need to be treated with an anti-corrosion agent and washed with an alkaline solution, which is selected depending on the type of converter.
4. After this, the cavities need to be dried with warm air.
5. Layers of anti-corrosion composition must be applied with intermediate drying.

Precautions during use

When working, you should follow the following safety rules:

• The treatment must be carried out in a well-ventilated area. Movil contains substances whose vapors can be poisoned if inhaled.
• You need to work in protective clothing, glasses and gloves. If liquid gets on your skin, you must immediately wash it with white alcohol (Stoddart's solvent, Nefras-S4-155/200) or water.
• To prevent poisoning by volatile substances, it is not recommended to use a car product for 3 days after the procedure. Movil takes a long time to dry.
• The material should be stored out of the reach of children, in a closed container and at a temperature no higher than 25 degrees and no lower than 0.

Among the existing auto chemical products, Movil has the greatest production experience: its formulation was developed back in the days of the USSR jointly by Moscow and Vilnius chemists. Due to the existence of a significant number of counterfeits in specialized markets, it is good to understand what the true Movil is and how to use it correctly.

MoVil - an original composition for the ages

Experienced motorists choose this drug from dozens of anti-corrosion agents on the modern market. What is Movil for cars? It was developed several decades ago and continues to be considered the most effective rust control agent. The work of the components is aimed at destroying rust and protecting the affected area from moisture and dirt.

The original Movil was created on the basis of research institutes in Moscow and Vilnius and was named after the first syllables of these cities. The composition of the product must include: drying oil, motor oil, anti-corrosion additives.

The low cost of the product and the consistent results from its application ensure stable demand for anticorrosive agents.

Types of Movil

Anti-corrosion drugs and rust converters are available in different forms. It depends on her how to use the product.

The most popular and convenient to use for car enthusiasts are aerosols.

The substance contained in the can should be sprayed directly onto the corrosion areas or onto the entire surface if the treatment is carried out as a preventive measure. An additional special tube allows you to apply the “rust cure” precisely to problem areas.

It makes sense to purchase a liquid preparation for treating a car body if large-scale work is planned. A special spherical nozzle intuitively helps you understand how to apply Movil correctly and evenly distribute the product over the entire required area.

Paste-like Movil is convenient for covering the underbody of a car; it is applied with a brush. To treat hidden cavities with the drug, you will need to dilute it with a solvent.

The universal, directed-action product is perfectly compatible with all types of paint and varnish coatings, does not have a negative effect, and is easily removed from surfaces. In addition, the original drug creates an additional protective layer that repels moisture.

The best Movil-based products

What is it, which Movil from those on the market is better to use and which anticorrosive agent to choose - the information below will help answer these questions. A short list of popular products with basic characteristics will be useful for both experienced and novice motorists.

• Kerry. Movil Kerry has an effective and versatile composition. It is used for processing the bottom, pillars, sills, arches and other hidden parts of the body. The coating reliably protects the metal parts of the car for a long period. The extended temperature range allows processing at any time of the year.
• Astrokhim is a domestically produced drug. Unlike many others and rust converters, including, it is safe not only for paintwork, but also for rubber. Characterized by elasticity and resistance to low temperatures. Well protects the car body from sand, stones, water, reagents.
• Crown. Convenient to apply directly after washing the car. The high cost is offset by very economical consumption. One can of aerosol is enough to cover the underbody and sills of the entire car.
• Dinitrol. Combines the qualities of a rust converter and Movil. If you are choosing which Movil for a car to buy, this is one of the best options. The German manufacturer has created a product that allows you to protect all body elements from rust, including hidden places and cavities. With the help of dinitrol, anyone can repair a car with their own hands.
• Tektil. This anticorrosive is based on paraffin and bitumen. Resistant to temperature changes, tectyl is characterized by good waterproof properties, adhesion, and durable coating.