How to install a 2 Din radio in a Lada Priora

How to Install a Radio on Priora 2

set the radio
in Zhiguli
priority

Introduction

Lada Prior . The location of the famous "tens" has been improved. Modern design and new configuration details have made this economical Russian car quite popular among car owners. But, despite this, every Priora owner strives to modify his car to his own taste, to make it more comfortable and elegant. How to install fog lights on a Lada Grant. Often lovers of clean and high-quality acoustics change their standard audio player to a more modern version. Installing a radio on Lada Priora has some features that can be found in this article.

Modern car players are quite functional and varied not only in external design, but also in configuration, installation and connection methods. I changed 1 din to stock radio 2, stock 2 din radio works as usual. When choosing a car player, priority should be taken into account all the features of its size, the ability to connect connectors and the quality of parts.

Features of the Lada Prior radio installation

As a rule, the radio installation has priority

includes several types of audio players:

Media player 2 DIN for LADA Priora

These designations indicate the dimensions of the mounting hole for the radio, which correspond to the dimensions 180x50x160 mm on 1 DIN and 180x100x160 mm on 2 DIN. Optional install

A more modern version of the 2 DIN radio, the motorist will have to perform the function of sawing through the partitions of the car's front console to widen the opening for the player. In some cases, adjusting the size may require cutting or purchasing a suitable adapter frame for the console, which is much more difficult than installing a 1 DIN.

However, if you decide to install a standard 2 DIN system, it is best to trust the installation to an experienced specialist, otherwise there is a risk of damaging both the console itself and the interior of the car.

It should also be noted that 2 DIN tape recorders have a wide range of functions:

long service life thanks to impact-resistant housing;
paired amplifiers increase signal reception a couple of times;
the ability to switch the frequency of the radio signal by all car passengers through the Music Zone system;
built-in radio navigation function;
built-in USB connector allows you to connect external devices to view and play files;
the presence of a bass amplifier for music for high-quality sound.

Built-in USB port and amplifier outputs

Do-it-yourself radio installation in Lada Prior

In the first case, we are considering the installation of a DIN 1 audio player, which does not provide configuration for the shape and characteristics of the plastic base of the console. Before installation, turn off the vehicle by pulling out the negative terminal of the battery.

The installation process of a standard audio player is divided into several stages in the following order:

Diary Lada Prior 2. Entry 16. Remove the center console (beard)

Subscribe to All About the Last Day.

Setting the radio to Priority 2 and setting the front 16 channels

Installation

one-way
radio
in
up to 2
and

16 front speaker settings

1. Preparing the hole for installation. To do this, remove the plastic cover that covers the niche provided by the manufacturer for installing the audio player;
2. Determination of connectors for connection. How to install fog lights on a grant | The hole has several connectors for installing an audio player: for connecting gray power and for coffee-colored speakers;
3. Connect the player to the automatic connectors. When matching the audio player and device connectors according to ISO, you must connect via a circuit diagram or via an adapter;
4. Install the radio in the normal hole. Remove the magnetic frame and install the body in the usual opening of the car console. Install the radio on the Lada Priora. If you want to install more on your computer. As. Clicking correctly will produce a small click;
5. Activate the player by pressing the reset button.

Installation of a DIN 2 audio player takes longer due to the formation of the appropriate hole size on the Priora console. The installation process is similar to the 1 DIN mounting system, the connection is made according to the same principle.

Standard firmware Lada radio priority

Modern technologies are rapidly developing, and automotive devices are also improving. how to install a rear view camera on a Granta; I bought the camera on Ebay. The standard firmware of the Lada radio Priora allows car owners to complement the player's capabilities by adding additional functions that they do not have in the standard software. The updated radio interface can be complemented by a convenient touch keyboard, fresh software and new versions of the player, with the ability to play all audio and video formats.

The VAZ 2170 audio player is equipped with an SD card with a capacity of at least 4 GB, formatted in FAT.

Firmware for Lada radio 2170 is quite simple:

1. You need to find a suitable program online and save it on your PC. As a rule, motorists share such programs on thematic forums;
2. Save the downloaded files to a memory card;
3. Installing a radio in Priora restyling I don’t know how to install it. How to install a rear view camera on a Grant | Insert the SD card with the required information into the provided radio;
4. Reboot the player by clicking the “Reset” button, after which the update program will automatically start. Thus, the firmware is coming to an end, as evidenced by the scale on the radio monitor;
5. After the firmware is completed, remove the memory card and restart the player, then use the updated interface.

The process of installing and connecting a car radio

As practice and reviews from many car owners show, it is not difficult for them to install such equipment with their own hands.

The standard method of powering and activating the camera is through the reversing lights. If the player is connected to a battery, an additional fuse is installed in the circuit near the battery terminal.

The second connection method allows you to activate the surveillance system regardless of reverse gear.

There are just plastic latches. The choice of frame is carried out in accordance with the car model, as well as the year of manufacture. As a result, all this was junk and it wasn’t Kenwood that replaced it.

Features of Chinese car radios

Connecting an amplifier to a car radio - creating powerful sound in a car If there are no wires in the car, or it is impossible to find a suitable adapter device, you will have to remove the existing connectors, dismantle them, and then directly twist new cables. First, we pull off 2 plastic shields - one at the driver’s right foot, the second at the passenger’s left foot.

The front camera is already integrated into the body of the product and does not require connection. It was while searching for a camera on Ali that the search engine suddenly showed up this balalaika.

DIY car radio connection diagram

By the way, after about half an hour of this “Kama Sutra” you will probably begin to think about buying a new car radio antenna. It was while searching for a camera on Ali that the search engine suddenly showed up this balalaika. To ensure stable reception of the radio signal, an additional amplifier is used, located in the switching circuit

If you value good sound quality, then also pay attention to the output power. Which, although in terms of functionality was modest, did its job perfectly - it produced a good, pleasant sound

You must first ensure good contact with the body by cleaning the joint from dirt and oxides. Connection and configuration are carried out in the following order: the on-board network of the machine is de-energized; the front camera is installed on the rear view mirror holder; install the rear one; for an aesthetic appearance, the connecting wires are connected to the head module under the interior trim; if the standard radio has two Video In inputs, connect the signal wires to them. How to properly connect a car radio (China)

Connection diagram

The factory connection diagram does not provide for the supply of positive power through the contact plates of the ignition switch (red cable). To ensure correct operation of the device, it is necessary to remove an additional cable from the circuit, which is energized only when the ignition is turned on. The line must be protected by a fuse rated at least 15 A (for example, a cigarette lighter circuit).

An additional signal, ensuring the safety of the settings when the car is stationary, is supplied using a wire with a yellow insulator. The cable is routed to a circuit connected to the positive terminal of the battery. There is also a ground connection in the power circuit. The power and speaker cables are routed into the instrument panel; to connect the head unit, you will need an ISO standard adapter.

Useful tips

Since the ignition switch in Lada Priora cars does not control the power supply to the radio, it is permissible to install a manual switch. The power cable, equipped with a red insulator, is connected to a button that is mounted on the instrument panel or center console. If a 2-DIN device with support for a rear view camera is mounted, then the housing with the lens is installed on the handle of the luggage compartment lid.

The cable is routed through the hole in the license plate light. The position of the video camera is adjusted using a flexible metal bracket or spacers. The equipment is connected to the on-board network through the reversing lights; the image is displayed only when the car is moving in reverse.

Audio, video and photo

The radio supports audio formats: MP3, WMA and WAV. While a tune is playing, the display shows information about the album, artist, and cover art (if any). You can adjust the shades of sound using the equalizer (there are 6 pre-programmed settings for Jazz, Rock, Voice, etc.). The sound quality is not bad, quite clear, without audible cuts in the highs or lows.

MMS supports only one video format: WMV with a resolution of 320*240px. To play video files you will have to use a converter, for example, Xilisoft Video Converter Ultimate. It will not be possible to play a video without conversion, for example, in 720p resolution, the picture will slow down, and the sound will lag behind the video, due to the insufficiently powerful processor.

Review of MMC Lada Granta (luxury) and Lada Kalina 2 (standard)

Review of MMC Lada Kalina 2 (luxury) and Lada Priora (luxury)

The radio is capable of opening photos, supported formats: JPEG, .JPG, .JPE, .BMP, GIF, .PNG. For example, a photo with a resolution of 1400x800px and a size of 1MB will open in about 1 second, and a photo of 1978x3456px and a size of 7MB will take as much as 9 seconds.

It is worth noting that after purchasing a car, the antenna comes as a gift. You will have to install it yourself.

Main functional features of devices

The main characteristic of DIN 2 universal radios is the presence of a display that can be used for different purposes.

In addition, such systems have the following features:

Most devices today offer users touch controls. In this case, it all depends on the model, since on sale you can find 2 DIN car radios that are controlled using buttons. However, touch technology has proven to be practical and reliable, which is why it is a hit with many consumers.
Ability to play files in a wide variety of formats. That is, the radio can be used not only as a music player, but also as a video player, since such systems allow you to work with video files. If necessary, the system can be synchronized with a mobile gadget or tablet, which will allow you to read data from third-party devices. It should also be noted that such systems allow you to read files from different media, in particular, CDs and DVDs, USB drives and SD cards.
On sale you can find not just music systems, but also radios with navigation. Thanks to the large display, the driver can easily set up and use the system with a GPS navigator. When purchasing such a device, you should focus on the software on which it runs. For example, many users praise devices with the Navitel platform, since the maps in this software are well adapted to domestic roads.
Built-in Bluetooth adapter. This function is available in every second 2 DIN car radio today. This option allows you to synchronize any mobile gadget that has a Bluetooth option with the head unit. The driver will be able to add contacts from the phone book to the radio, as well as play tracks from portable gadgets. In addition, if the phone is synchronized with the system, the driver will be able to talk on the phone with other subscribers without being distracted from the road.
Decent sound quality. As practice shows, usually double radios allow you to provide optimal sound quality, of course, if the car has more or less normal acoustics installed (video author - Dmitry Istomin).

Advantages and disadvantages

Let's look at the pros first:

ease of control and configuration thanks to the large screen;
affordable price for most devices - you can choose a model according to your capabilities;
many different functions used to perform certain purposes;
convenient platform;
the ability to connect a rear view camera, but it all depends on the model;
competitive sound quality, especially if the car has normal acoustics;
Most radios have a TV tuner function, which allows you to watch television programs;
ability to read information from different media.

But such car radios also have disadvantages, in particular:

if you prefer a cheap option, you must understand that it will not work as stably as more expensive analogues;
As practice shows, the TV tuner in most models is very weak;
Devices running on the Android platform freeze more often than others.

Transition frames for installation

Adapter frame for audio system

Adapter frames are used to install head units in the center console of a car. Modern car manufacturers are doing everything possible to ensure that non-standard radios cannot be installed in their cars. Accordingly, when purchasing a non-standard car radio, the car owner may encounter difficulties in its further installation. It is necessary to take into account that the frames are different, sometimes they can take up a lot of space on the dashboard.

If you install a multimedia system with a transition frame, you will be able to close any gaps that may appear on the center console as a result of installation. The choice of frame is carried out in accordance with the car model, as well as the year of manufacture. If you are the owner of a new car, then it is quite possible that you will not be able to find a frame on sale, since their production begins some time after the car is released (the author of the video is Alexey Vasiliev).

Why bluetooth doesn't work

Most often, failure occurs due to the fault of Sony smartphones. We have already looked at how to connect bluetooth to the Lada Vesta, so it’s worth trying the pairing again.

Connection may not be possible when the Bluetooth function in Vesta is not activated in the radio. Press the button to accept the call, the system begins to function. If this does not resolve the problem, it is best to contact your dealer. Also, this problem may appear after trying to connect several phones. There may be other reasons why Bluetooth does not work on Vesta, including a factory defect.

Connecting your phone via Bluetooth to the multimedia system

As you know, Russian engineers installed a modern multimedia system with a touch monitor in the new Kalina. It is worth noting that in addition to the functions of displaying video and playing music, it allows you to connect the driver’s cell phone via Bluetooth wireless technology. So, what actions do you need to take to connect your phone to Bluetooth on the new Kalina 2? 1) First, in your mobile phone’s Bluetooth settings, check the box above the “Visibility to everyone” option. After that, turn on wireless technology. Once the connection is activated, you can proceed to the next steps.

Firmware for Lada Priora radio

Modern technologies are rapidly moving forward, also improving car gadgets. Firmware for the standard Lada Priora radio allows car enthusiasts to expand the capabilities of the player by adding additional functions that the standard software does not have. The updated radio interface can be supplemented with a convenient touch keyboard, fresh programs and new versions of players with the ability to play all audio and video formats.

Radio set from Priora 2

The firmware of the VAZ 2170 audio player system is carried out using an SD card with a capacity of at least 4 GB, formatted in the FAT system.

Firmware for the Lada 2170 radio is quite simple:

1. You need to find a suitable program on the Internet and save it to your PC. As a rule, such programs are shared by car enthusiasts on thematic forums;
2. Write downloaded files to a memory card;
3. Insert the SD card with the necessary information into the provided slot on the radio;
4. Restart the player by pressing the “Reset” button, after which the update program will automatically start. Thus, the firmware goes through to completion, as evidenced by the scale on the radio monitor;
5. When the firmware is completed, you should remove the memory card and reboot the player, after which you can use the updated interface.

Removing the device according to the instructions

The algorithm for removing the radio if you have the keys is outrageously simple. It is worth considering in order to understand how to act if they are lost. The order is as follows:

Remove the front panel of the player and the decorative plastic frame, prying it up with a flathead screwdriver if necessary.
Insert the first key into the gap between the housing and the mounting frame, located at the end. You should feel slight resistance as the tool bends the latch.
Repeat the same action with the second key.
Grasp the radio with your hands by the protruding parts on the sides of the case and carefully remove it from the niche.

To remove the radio, 2 keys are used

Advice. There is no need to apply much effort, the device should be removed quite easily

At the end, act carefully so as not to yank the wires again and break the contact.

Special keys must be inserted into the side openings

When the radio is equipped with four latches, access to them is through 2 pairs of round holes. You need to insert 2 U-shaped keys into them and pull them out by the body, as described above.

The music center can be easily removed using keys

Connecting a 2 DIN radio to a standard place in the car

How to connect a 2 DIN radio with aliexpress in a car

DIN stands for "Deutsche Industriele Norme" - or "German Industrial Standards". The standard dimensions of a radio tape recorder installed in the car's standard socket. These standards are used by all manufacturers of cars and car radios (or almost all), at least all Chinese radios supplied to us from aliexpress, all of them are assembled according to 1 DIN standards, and more often - 2 DIN. By the way, 1 DIN is the size of the radio, the width x height of which is 180x50mm. 2 DIN - 180x100mm, with the installation depth of all DINs being 160mm. There is also a very rarely used standard for radio dimensions 1.5 DIN - 180x75mm. But finding such a radio is very rare, so today we will consider the usual size of a multimedia player - 2 DIN.

So, in order for us to connect such a radio, if we previously had a 1 DIN radio in the car, we will have to remove the old radio and install the ears on which the radio is attached under the dashboard from the new radio (these are most often included with the radio, but always please specify). In addition to the ears, we will also need a frame sized 2 DIN, which will no longer be included with the radio. It must be purchased separately for each vehicle. It is very advisable to treat the places of fastening and contact of the plastic of such a frame with an anti-creaking composition, otherwise not very pleasant squeaks will be produced in the cabin; they will not appear immediately, but over time.

So, with the installation of the radio, everything is more or less clear (for those who are not very clear, watch the video of installing the 2 din radio below). Now we need to look at the connection diagrams for the 2 din radio, and also figure out its pinout.

Connection diagrams for 2 DIN radio

Most Chinese 2 din radios from Aliexpress are connected to the car via an ISO - Euro connector. This is the most universal connector and the easiest to connect to almost any car. And the pinout is quite logical and simple.

Pinout of ISO - Euro connector of Chinese 2 din radio from aliexpress (example - Podofo - 7018B). Similar radios with an ISO connector will have the same pinout.

Designation of wires of a Chinese 2 din radio

But there are other connectors often used on Chinese radios. I suggest you familiarize yourself with their pinout and subsequent connection

Pinout of 2 din radio from China

The meaning of the 2 din connectors of the radio

Meaning of 2 din radio wires

Connecting tulips 2 din radio

You can read more about the pinout of the ISO-Euro connector and connecting Podofo radios and similar ones on the pages of our website.

Video - examples of connecting 2 DIN radios

Connection diagrams are, of course, good, but it’s much more clear to see how someone has already gone before you by connecting a 2-din radio to a standard place and made a fairly sensible video about it. So, I suggest you familiarize yourself with the most outstanding works of connecting radio tape recorders that are only available in the YouTube collection.

Connecting a 2 din radio using the example of a Lada Priora

Connecting a 2 din radio in a Kia Rio or Hyundai Solaris

Connecting a 2 din radio in Renault Logan or Sandero

Connecting a 2 din radio in a Toyota Corolla 120

From the videos it follows that there is nothing particularly complicated, except for partial disassembly of the car’s dashboard, connecting a 2 din radio to its standard location is no different. You just need to buy everything you need, understand the connection diagram and pinout of the radio, as well as the wires, and slowly connect everything. This process will not present any problems for any more or less handy person.

How to connect a camera, phone and steering wheel buttons to a 2 DIN radio

The issues of connecting steering wheel control buttons, a rear view camera and synchronizing a phone with it to a Chinese 2 din radio are so extensive that one article is not enough to discuss these topics. Therefore, we decided to break these topics down into the following articles:

Installation in Lada Priora 2

Priora 2 cars are equipped with a standard 1 DIN size radio with a trapezoidal front part. The display is located on the top of the instrument panel, which makes it easier to read information.

Basic configurations were not equipped with a head unit; plastic plugs were installed on the central part of the instrument panel.

The instrument panel has a standard harness for connecting the radio, equipped with an ISO connector consisting of two plugs.

Self-installation of the radio on Priora 2 includes several stages:

Unscrew a couple of screws located under the removable rubber mat in the niche for small items.
Remove the decorative leather cover of the gear selector knob, under which there are 3 additional screws for a Phillips screwdriver.
Remove the lower part of the center console; the gear shift knob remains in its original place.
Unscrew a pair of screws located under the climate control unit.
Use a spatula to pry and remove the 2 covers located above the button block and under the standard place for the radio.
Unscrew the remaining 4 screws and pull the front panel towards you.
After this, it is necessary to modify the panel or mount the equipment in a standard window and make adjustments.

The radio installed on the Priora must be connected through the ignition switch, which allows you to save settings and guarantees that the equipment is turned off after removing the key. It is necessary to modify the standard plugs by supplying additional power from the buttons in the instrument panel.

Installation of foreign-made climate systems

Lada Priora air conditioner "August" is one of the most inexpensive options. If you want to buy a higher quality device, then you can opt for the Hull, Panasonic or Frost systems. In practice, the latest model is characterized by good compatibility with the Priora heating system, due to which the air flow filtration will be of better quality. As for the installation scheme, it is practically no different (the author of the video is Auto World).

But Frost also has its drawbacks: it happens that the installation gets very hot, does not cool the air well, and generally does not cope well with its assigned functions. But even if the unit works well, it will take longer to cool the interior. This is because the compressor itself is not particularly powerful. But despite the disadvantages, Frost also has advantages. When the air conditioning is turned on, it will generally not affect the functionality of the vehicle.

It should also be noted that the air conditioning units of this manufacturer were tested in African countries, and this says a lot. In particular, during testing, the installation cooled the interior well, while the engine of cars of various brands did not overheat. On sale you can find several variants of Frost condensers, which differ from each other only in the installation method. When installing the device, you will need to remove the heating system damper, but this will allow you to install an air filter, which is no less important.

In any case, when purchasing, you should focus on your preferences, as well as your budget. If the device gets very hot, you need to pay attention to diagnosing all its components and components. As a rule, this problem is caused by the need to replace the radiator. In addition, during operation, one should not forget about refueling the system, as well as its periodic cleaning. We have already written in more detail about how to clean the air conditioner on your own using improvised means; you will find information about this here.

Types of radio mounts

Standard radio for a Lada Granta car
To choose a method for removing the car player, you need to understand how it is fixed inside the panel. The following types of fastenings exist:

on 2 side clamps;
on 4 latches located on the side and top of the case;
fastened with self-tapping screws or screws to the brackets.

Example of mounting a standard head unit

Note. The last method of fixation is typical for standard devices that are supplied to the car by the manufacturer.

Latch on mounting frame

The principle of fastening with latches (clamps) is that the body of the radio is enclosed in a metal mounting frame, and is not directly built into the panel niche. This intermediate part, which has special petals with protrusions or grooves (depending on the brand and model of the device), is securely fixed in the niche. The player body is equipped with mating latches that engage when the player is inserted into the socket.

The counterpart of the latch on the body

To unlock the latches and remove the car radio, keys of various shapes are used, supplied by the manufacturer complete with music for the car. They are lost over the years of car operation, since they are used extremely rarely. As a rule, the key is a shaped strip of metal or a handle inserted into 2 pairs of holes located on the front panel of the device.

This is what most car radio removal keys look like

The mountings of standard radios are most often made with bolts, screwed to brackets and hidden under the front plastic panel. Here you cannot do without a minimum set of tools to dismantle this panel and unscrew the mounting screws or bolts.

Speaker installation

All Lada Vesta configurations have audio preparation, which simplifies the task of installing equipment, because there is no need to run the necessary cables and wires. The required minimum is present in all Vesta configurations, which allows you to effortlessly install both the head unit and dynamic heads with your own hands.

Installation of speakers does not require additional tools, so the work can be carried out without special training.

Before installing the speakers, you must carefully remove the insulation material in the places where the acoustics will be located.

Are you a car driver?! Then you can take this simple test and find out. Go to test »

Also, to seal the fasteners, you will need gaskets made of felt or similar material, which you can cut out yourself.

The installation area is equipped with only three fasteners, so to fix it with 4 fasteners you will need to install special stands. These stands can be made independently or purchased in advance at an automotive equipment store.

Then unscrew the screws at the bottom of the casing, bend the linings and push the spacers into this space. There is no need to secure them additionally; they will sit tightly in the prepared niche.

The installation area must be soundproofed. It is possible to improve the sound quality when playing audio.

The wires for the audio system are already in the cabin, but their connectors may not be standard. Therefore, it is better to purchase adapters in advance so as not to cut off the standard connectors, because this may affect the vehicle's warranty service.

Having connected the adapters, you need to mount the speakers into prepared connectors with ready-made sound insulation and pads.

This sequence of simple steps will allow you to install good-sounding speakers quickly and without the cost of installation by outside specialists. You need to act carefully, slowly, so as not to damage the trim and plastic in the cabin.

Nuances of multimedia firmware Grants (2190)

It is quite easy to carry out the firmware itself when installing the mms 2190 firmware. To do this, it will be necessary to use an SD card.

Let's concentrate! This card is subject to mandatory and preliminary formatting using the “FAT16” version.

Among the common flaws that occur after the dashboard firmware is installed, even if it is the latest version, is the Lada logo freezing on the display of the head unit.

This moment can be provoked by the following factors:

failure to comply with required formatting principles;
the presence of an outdated version of the SD card that differs from “SDHC”.

After successfully formatting the card and selecting software (for example, “New Menu V7.391 Nitro”), you will need to acquire the latest firmware and unpack the product onto a previously prepared SD media.

Regarding the “Firm Ware” folder, note: the files located in it will need to be redirected to the root directory of the card itself. Upon completion of the copying process, disconnect the flash card from the PC, not forgetting about the safe removal technique.

Now we confidently insert the SD card with the prepared files present on it directly into the MMC. Then turn on the head unit. We wait for the full download to complete and by long pressing the volume button, we reboot.

The act of rebooting is characterized by four stages, the display of which is implemented in 4 lines of process status. After filling out these lines, the device starts in the usual mode, as evidenced by the appearance of the corresponding original menu. After a few seconds, the device transitions to the altmenu.

Let's pay attention! If the USB multimedia connector is occupied by another device or connected to it, then the process of launching the altmenu becomes impossible. After the slot is released, the MMC will require another reboot.

The USB splitter “DNS ATH-08” has acquired a significant advantage – multi-polarity. The GPS receiver and other USB modules connected to the “head” are combined with the altmenu, but become inactive.

After the MMS 2190 firmware is completed on a Lada Granta car, its display displays a new type of desktop, namely “Wince”. The 4 files previously mentioned and copied into the depths of the root directory of the map are “responsible” for the presence of the interface on the desktop.

The subsequent manipulation is associated with the need to configure new software in the standard multimedia device of the Lada Granta car. For these purposes, click the “Start” button, after which we follow the following route: “StartSettingControl Panel”. Sometimes owners complain about the slowness of the “Control Panel” opening process, but this phenomenon disappears after rebooting the MMC in forced mode.

When the control panel is open, in its interface click on the “Stylus/Calibration” symbol. With this action, the user of the new software gets the opportunity to calibrate the touch screen for response accuracy.

Upon completion of the simple calibration procedure, a timer appears; you should not wait for the completion of the counting process. Feel free to click on the screen.

Now the long-awaited time has come for the forced reboot process. Long and holding pressure on the volume key (10 seconds or more) allows you to implement this process in MMC. At this moment, the removable media, which contains the new software, continues to reside in the connector of the head unit of the Lada Granta car.

Having completed the reboot action, the device will first display the standard menu, and then, similar to the preparation procedure, the altmenu. If you need to return to the “native” menu, you should hold down the “Native” key.

The process of rebooting the device, after the dashboard firmware has been flashed, requires its connection via a USB splitter of the specified model with the Globalsat BU-353S4 GPS wave receiver. If there is none, then upon completion of the process itself the “head” will display the normal menu mode on the display.

Such common settings as sound, as well as audio or video, are present in any multimedia device in the domestic Lada Granta car.

“NewMenu V7.391Nitro” needs a manual way to install the indicated options, which will require:

log in to the “soft/radio” folder;
resort to activating the “start.exe” file.

The procedure will agree to associate present files with the extensions “exe” and “ahk”. This manipulation is quite important and allows you to achieve stable functionality of the MMC, which is used to flash the dashboard firmware.

Benefits of new technologies

MMC Lada Kalina 2 is characterized by a simplified control system. Now all the necessary options can be obtained with 1-2 taps on the screen. The system is equipped with a more functional resistive screen. Unlike the standard Kalina radio with a capacitive version, the resistant screen has improved performance characteristics. The device is able to operate without failures in any temperature conditions.

Lada owners often complained that in sunny weather it became impossible to use the car radio. This is due to the numerous glares that make the characters on capacitive screens almost unreadable. The designers, when developing the second version of the radio, took this drawback into account.

If desired, the car owner can choose a model with a mini-visor that protects from glare.

The maximum display area of MMS Kalina 2 is 7 inches. Its operation is based on the Windows CE 6 operating system. The version developed specifically for radio tape recorders has characteristics close to optimal. It takes a few seconds to turn on the device. The amount of RAM ranges from 128 to 256 MB. Firmware for the Kalina 2 radio has significantly improved the technical capabilities of the equipment. Now they are as follows:

support for wav, wma, mp3 formats;
6 programmed shades of music playback;
the display of the Lada Kalina 2 radio shows information about the song and album during playback;
there is the ability to play video in wmv format;
the multimedia system supports maximum video resolution at 320*240 pixels;
it is possible to play video files of other formats, but for this you will have to use a convector;
availability of FM radio;
micro SD card support;
Lada radio firmware makes it possible to view images saved in bmp, gif, jpe, jpg, jpeg formats;
The maximum photo size is not limited, but if it exceeds 2 MB, then the Kalina multimedia firmware will open it from 2 to 10 seconds.

Video on how to prepare an SD card for flashing the radio

Firmware order:

Copy the firmware files (Chain.bin, chain.lst, NK.bin, TINYNK.bin) to the root of the SD card.
Remove the flash drive from the USB port.
Insert the SD card into the MMC.
Restart the radio (for Lada Kalina 2/Priora - hold down the power button for 15 seconds, for Lada Granta hold down the volume button for 15 seconds).
During the download, an update will occur, after which the radio will boot into desktop mode.
Without rebooting the radio, go to the screen calibration mode (Start/Settings/Control Panel/Stilus/ to the Calibration/Recalibrate tab), then press the screen during the countdown.
Reboot the MMS with the SD card inserted.
The firmware of the radio is complete, the SD card can be removed.

Connecting the amplifier to the radio via the ISO connector

We connect the amplifier through the high-level input to the radio (speaker output).

This connection method is suitable for the average user. Music lovers are not satisfied with this method due to the large number of circuits between the radio and the amplifier (pre-amplifier, radio amplifier, external amplifier voltage divider, power amplifier), which introduce their own distortions.